View PIC16F818_246484.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PIC16F818/819 Data Sheet
18/20-Pin Enhanced Flash Microcontrollers with nanoWatt Technology
2004 Microchip Technology Inc.
DS39598E
Note the following details of the code protection feature on Microchip devices: * * Microchip products meet the specification contained in their particular Microchip Data Sheet. Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the intended manner and under normal conditions. There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip's Data Sheets. Most likely, the person doing so is engaged in theft of intellectual property. Microchip is willing to work with the customer who is concerned about the integrity of their code. Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not mean that we are guaranteeing the product as "unbreakable."
*
* *
Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our products. Attempts to break Microchip's code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.
Information contained in this publication regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip's products as critical components in life support systems is not authorized except with express written approval by Microchip. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.
Trademarks The Microchip name and logo, the Microchip logo, Accuron, dsPIC, KEELOQ, microID, MPLAB, PIC, PICmicro, PICSTART, PRO MATE, PowerSmart, rfPIC, and SmartShunt are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. AmpLab, FilterLab, MXDEV, MXLAB, PICMASTER, SEEVAL, SmartSensor and The Embedded Control Solutions Company are registered trademarks of Microchip Technology Incorporated in the U.S.A. Analog-for-the-Digital Age, Application Maestro, dsPICDEM, dsPICDEM.net, dsPICworks, ECAN, ECONOMONITOR, FanSense, FlexROM, fuzzyLAB, In-Circuit Serial Programming, ICSP, ICEPIC, Migratable Memory, MPASM, MPLIB, MPLINK, MPSIM, PICkit, PICDEM, PICDEM.net, PICLAB, PICtail, PowerCal, PowerInfo, PowerMate, PowerTool, rfLAB, rfPICDEM, Select Mode, Smart Serial, SmartTel and Total Endurance are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. SQTP is a service mark of Microchip Technology Incorporated in the U.S.A. All other trademarks mentioned herein are property of their respective companies. (c) 2004, Microchip Technology Incorporated, Printed in the U.S.A., All Rights Reserved. Printed on recycled paper.
Microchip received ISO/TS-16949:2002 quality system certification for its worldwide headquarters, design and wafer fabrication facilities in Chandler and Tempe, Arizona and Mountain View, California in October 2003. The Company's quality system processes and procedures are for its PICmicro(R) 8-bit MCUs, KEELOQ(R) code hopping devices, Serial EEPROMs, microperipherals, nonvolatile memory and analog products. In addition, Microchip's quality system for the design and manufacture of development systems is ISO 9001:2000 certified.
DS39598E-page ii
2004 Microchip Technology Inc.
PIC16F818/819
18/20-Pin Enhanced Flash Microcontrollers with nanoWatt Technology
Low-Power Features:
* Power-Managed modes: - Primary Run: XT, RC oscillator, 87 A, 1 MHz, 2V - INTRC: 7 A, 31.25 kHz, 2V - Sleep: 0.2 A, 2V * Timer1 oscillator: 1.8 A, 32 kHz, 2V * Watchdog Timer: 0.7 A, 2V * Wide operating voltage range: - Industrial: 2.0V to 5.5V
Pin Diagram
18-Pin PDIP, SOIC
RA2/AN2/VREFRA3/AN3/VREF+ RA4/AN4/T0CKI RA5/MCLR/VPP VSS RB0/INT RB1/SDI/SDA RB2/SDO/CCP1 RB3/CCP1/PGM *1 2 3 4 5 6 7 8 9 18 17 16 15 14 13 12 11 10 RA1/AN1 RA0/AN0 RA7/OSC1/CLKI RA6/OSC2/CLKO VDD RB7/T1OSI/PGD RB6/T1OSO/T1CKI/PGC RB5/SS RB4/SCK/SCL
Oscillators:
* Three Crystal modes: - LP, XT, HS: up to 20 MHz * Two External RC modes * One External Clock mode: - ECIO: up to 20 MHz * Internal oscillator block: - 8 user selectable frequencies: 31 kHz, 125 kHz, 250 kHz, 500 kHz, 1 MHz, 2 MHz, 4 MHz, 8 MHz
Special Microcontroller Features:
* 100,000 erase/write cycles Enhanced Flash program memory typical * 1,000,000 typical erase/write cycles EEPROM data memory typical * EEPROM Data Retention: > 40 years * In-Circuit Serial ProgrammingTM (ICSPTM) via two pins * Processor read/write access to program memory * Low-Voltage Programming * In-Circuit Debugging via two pins
Peripheral Features:
* * * * * * 16 I/O pins with individual direction control High sink/source current: 25 mA Timer0: 8-bit timer/counter with 8-bit prescaler Timer1: 16-bit timer/counter with prescaler, can be incremented during Sleep via external crystal/clock Timer2: 8-bit timer/counter with 8-bit period register, prescaler and postscaler Capture, Compare, PWM (CCP) module: - Capture is 16-bit, max. resolution is 12.5 ns - Compare is 16-bit, max. resolution is 200 ns - PWM max. resolution is 10-bit 10-bit, 5-channel Analog-to-Digital converter Synchronous Serial Port (SSP) with SPITM (Master/Slave) and I2CTM (Slave)
* *
Program Memory Device Flash (Bytes) 1792 3584 # Single-Word Instructions 1024 2048
Data Memory SRAM (Bytes) 128 256 EEPROM I/O Pins (Bytes) 128 256 16 16 10-bit A/D (ch) 5 5 CCP (PWM) 1 1
PIC16F818/819
SSP SPITM Y Y Slave I2CTM Y Y Timers 8/16-bit 2/1 2/1
PIC16F818 PIC16F819
2004 Microchip Technology Inc.
DS39598E-page 1
PIC16F818/819
Pin Diagrams
18-Pin PDIP, SOIC
RA2/AN2/VREFRA3/AN3/VREF+ RA4/AN4/T0CKI RA5/MCLR/VPP VSS RB0/INT RB1/SDI/SDA RB2/SDO/CCP1 RB3/CCP1/PGM *1 2 3 4 5 6 7 8 9 18 17 16 15 14 13 12 11 10 RA1/AN1 RA0/AN0 RA7/OSC1/CLKI RA6/OSC2/CLKO VDD RB7/T1OSI/PGD RB6/T1OSO/T1CKI/PGC RB5/SS RB4/SCK/SCL
20-Pin SSOP
RA2/AN2/VREFRA3/AN3/VREF+ RA4/AN4/T0CKI RA5/MCLR/VPP VSS VSS RB0/INT RB1/SDI/SDA RB2/SDO/CCP1 RB3/CCP1/PGM *1 2 3 4 5 6 7 8 9 10 20 19 18 17 16 15 14 13 12 11 RA1/AN1 RA0/AN0 RA7/OSC1/CLKI RA6/OSC2/CLKO VDD VDD RB7/T1OSI/PGD RB6/T1OSO/T1CKI/PGC RB5/SS RB4/SCK/SCL
PIC16F818/819
RA4/AN4/T0CKI
RA3/AN3/VREF+
RA2/AN2/VREF-
28-Pin QFN
RA1/AN1
RA0/AN0
NC
28
27
26
25
24
23
22
NC
RA5/MCLR/VPP NC VSS NC VSS NC RB0/INT
1 2 3 4 5 6 7 10 11 12 13 14 8 9
21 20 19
RA7/OSC1/CLKI RA6/OSC2/CLKO VDD NC VDD RB7/T1OSI/PGD RB6/T1OSO/T1CKI/PGC
PIC16F818/819
18 17 16 15
RB3/CCP1/PGM
RB2/SDO/CCP1
RB4/SCK/SCL
NC
RB1/SDI/SDA
RB5/SS
NC
DS39598E-page 2
PIC16F818/819
2004 Microchip Technology Inc.
PIC16F818/819
Table of Contents
1.0 Device Overview .......................................................................................................................................................................... 5 2.0 Memory Organization ................................................................................................................................................................... 9 3.0 Data EEPROM and Flash Program Memory.............................................................................................................................. 25 4.0 Oscillator Configurations ............................................................................................................................................................ 33 5.0 I/O Ports ..................................................................................................................................................................................... 39 6.0 Timer0 Module ........................................................................................................................................................................... 53 7.0 Timer1 Module ........................................................................................................................................................................... 57 8.0 Timer2 Module ........................................................................................................................................................................... 63 9.0 Capture/Compare/PWM (CCP) Module ..................................................................................................................................... 65 10.0 Synchronous Serial Port (SSP) Module ..................................................................................................................................... 71 11.0 Analog-to-Digital Converter (A/D) Module.................................................................................................................................. 81 12.0 Special Features of the CPU...................................................................................................................................................... 89 13.0 Instruction Set Summary .......................................................................................................................................................... 103 14.0 Development Support............................................................................................................................................................... 111 15.0 Electrical Characteristics .......................................................................................................................................................... 117 16.0 DC and AC Characteristics Graphs and Tables....................................................................................................................... 143 17.0 Packaging Information.............................................................................................................................................................. 157 Appendix A: Revision History............................................................................................................................................................. 163 Appendix B: Device Differences ........................................................................................................................................................ 163 Index .................................................................................................................................................................................................. 165 On-Line Support................................................................................................................................................................................. 171 Systems Information and Upgrade Hot Line ...................................................................................................................................... 171 Reader Response .............................................................................................................................................................................. 172 PIC16F818/819 Product Identification System .................................................................................................................................. 173
TO OUR VALUED CUSTOMERS
It is our intention to provide our valued customers with the best documentation possible to ensure successful use of your Microchip products. To this end, we will continue to improve our publications to better suit your needs. Our publications will be refined and enhanced as new volumes and updates are introduced. If you have any questions or comments regarding this publication, please contact the Marketing Communications Department via E-mail at docerrors@microchip.com or fax the Reader Response Form in the back of this data sheet to (480) 792-4150. We welcome your feedback.
Most Current Data Sheet
To obtain the most up-to-date version of this data sheet, please register at our Worldwide Web site at: http://www.microchip.com You can determine the version of a data sheet by examining its literature number found on the bottom outside corner of any page. The last character of the literature number is the version number, (e.g., DS30000A is version A of document DS30000).
Errata
An errata sheet, describing minor operational differences from the data sheet and recommended workarounds, may exist for current devices. As device/documentation issues become known to us, we will publish an errata sheet. The errata will specify the revision of silicon and revision of document to which it applies. To determine if an errata sheet exists for a particular device, please check with one of the following: * Microchip's Worldwide Web site; http://www.microchip.com * Your local Microchip sales office (see last page) When contacting a sales office, please specify which device, revision of silicon and data sheet (include literature number) you are using.
Customer Notification System
Register on our web site at www.microchip.com to receive the most current information on all of our products.
2004 Microchip Technology Inc.
DS39598E-page 3
PIC16F818/819
NOTES:
DS39598E-page 4
2004 Microchip Technology Inc.
PIC16F818/819
1.0 DEVICE OVERVIEW
TABLE 1-1:
This document contains device specific information for the operation of the PIC16F818/819 devices. Additional information may be found in the "PICmicro(R) Mid-Range MCU Family Reference Manual" (DS33023) which may be downloaded from the Microchip web site. The Reference Manual should be considered a complementary document to this data sheet and is highly recommended reading for a better understanding of the device architecture and operation of the peripheral modules. The PIC16F818/819 belongs to the Mid-Range family of the PICmicro(R) devices. The devices differ from each other in the amount of Flash program memory, data memory and data EEPROM (see Table 1-1). A block diagram of the devices is shown in Figure 1-1. These devices contain features that are new to the PIC16 product line: * Internal RC oscillator with eight selectable frequencies, including 31.25 kHz, 125 kHz, 250 kHz, 500 kHz, 1 MHz, 2 MHz, 4 MHz and 8 MHz. The INTRC can be configured as the system clock via the configuration bits. Refer to Section 4.5 "Internal Oscillator Block" and Section 12.1 "Configuration Bits" for further details. * The Timer1 module current consumption has been greatly reduced from 20 A (previous PIC16 devices) to 1.8 A typical (32 kHz at 2V), which is ideal for real-time clock applications. Refer to Section 6.0 "Timer0 Module" for further details. * The amount of oscillator selections has increased. The RC and INTRC modes can be selected with an I/O pin configured as an I/O or a clock output (FOSC/4). An external clock can be configured with an I/O pin. Refer to Section 4.0 "Oscillator Configurations" for further details.
AVAILABLE MEMORY IN PIC16F818/819 DEVICES
Program Flash 1K x 14 2K x14 Data Memory 128 x 8 256 x 8 Data EEPROM 128 x 8 256 x 8
Device PIC16F818 PIC16F819
There are 16 I/O pins that are user configurable on a pin-to-pin basis. Some pins are multiplexed with other device functions. These functions include: * * * * * * * * External Interrupt Change on PORTB Interrupt Timer0 Clock Input Low-Power Timer1 Clock/Oscillator Capture/Compare/PWM 10-bit, 5-channel Analog-to-Digital Converter SPI/I2C MCLR (RA5) can be configured as an Input
Table 1-2 details the pinout of the devices with descriptions and details for each pin.
2004 Microchip Technology Inc.
DS39598E-page 5
PIC16F818/819
FIGURE 1-1: PIC16F818/819 BLOCK DIAGRAM
13 Program Counter Flash Program Memory 1K/2K x 14 Data Bus 8 PORTA RA0/AN0 RA1/AN1 RA2/AN2/VREFRA3/AN3/VREF+ RA4/AN4/T0CKI RA5/MCLR/VPP RA6/OSC2/CLKO RA7/OSC1/CLKI PORTB Indirect Addr RB0/INT RB1/SDI/SDA RB2/SDO/CCP1 RB3/CCP1/PGM RB4/SCK/SCL RB5/SS RB6/T1OSO/T1CKI/PGC RB7/T1OSI/PGD
8-Level Stack (13-bit)
RAM File Registers 128/256 x 8 RAM Addr(1) 9
Program Bus
14 Instruction reg Direct Addr 7
Addr MUX 8
FSR reg Status reg 8 3
Power-up Timer Instruction Decode & Control Timing Generation RA7/OSC1/CLKI RA6/OSC2/CLKO Oscillator Start-up Timer Power-on Reset Watchdog Timer Brown-out Reset 8
MUX
ALU
W reg
MCLR
VDD, VSS
Timer0
Timer1
Timer2
Data EE
128/256 Bytes
10-bit, 5-channel A/D
Synchronous Serial Port
CCP1
Note 1:
Higher order bits are from the Status register.
DS39598E-page 6
2004 Microchip Technology Inc.
PIC16F818/819
TABLE 1-2:
Pin Name
PIC16F818/819 PINOUT DESCRIPTIONS
PDIP/ SSOP QFN SOIC Pin# Pin# Pin# I/O/P Type Buffer Type Description PORTA is a bidirectional I/O port.
RA0/AN0 RA0 AN0 RA1/AN1 RA1 AN1 RA2/AN2/VREFRA2 AN2 VREFRA3/AN3/VREF+ RA3 AN3 VREF+ RA4/AN4/T0CKI RA4 AN4 T0CKI RA5/MCLR/VPP RA5 MCLR
17
19
23 I/O I TTL Analog TTL Analog TTL Analog Analog TTL Analog Analog ST Analog ST ST ST Bidirectional I/O pin. Analog input channel 0. Bidirectional I/O pin. Analog input channel 1. Bidirectional I/O pin. Analog input channel 2. A/D reference voltage (low) input. Bidirectional I/O pin. Analog input channel 3. A/D reference voltage (high) input. Bidirectional I/O pin. Analog input channel 4. Clock input to the TMR0 timer/counter. Input pin. Master Clear (Reset). Input/programming voltage input. This pin is an active-low Reset to the device. Programming threshold voltage. Bidirectional I/O pin. Oscillator crystal output. Connects to crystal or resonator in Crystal Oscillator mode. In RC mode, this pin outputs CLKO signal which has 1/4 the frequency of OSC1 and denotes the instruction cycle rate. Bidirectional I/O pin. Oscillator crystal input. External clock source input.
18
20
24 I/O I
1
1
26 I/O I I
2
2
27 I/O I I
3
3
28 I/O I I
4
4
1 I I
VPP RA6/OSC2/CLKO RA6 OSC2 CLKO 15 17 20
P I/O O O
- ST - -
RA7/OSC1/CLKI RA7 OSC1 CLKI
16
18
21 I/O I I ST ST/CMOS(3) -
Legend: I = Input O = Output I/O = Input/Output P = Power - = Not used TTL = TTL Input ST = Schmitt Trigger Input Note 1: This buffer is a Schmitt Trigger input when configured as the external interrupt. 2: This buffer is a Schmitt Trigger input when used in Serial Programming mode. 3: This buffer is a Schmitt Trigger input when configured in RC Oscillator mode and a CMOS input otherwise.
2004 Microchip Technology Inc.
DS39598E-page 7
PIC16F818/819
TABLE 1-2:
Pin Name
PIC16F818/819 PINOUT DESCRIPTIONS (CONTINUED)
PDIP/ SSOP QFN SOIC Pin# Pin# Pin# I/O/P Type Buffer Type Description PORTB is a bidirectional I/O port. PORTB can be software programmed for internal weak pull-up on all inputs.
RB0/INT RB0 INT RB1/SDI/SDA RB1 SDI SDA RB2/SDO/CCP1 RB2 SDO CCP1 RB3/CCP1/PGM RB3 CCP1 PGM RB4/SCK/SCL RB4 SCK SCL RB5/SS RB5 SS RB6/T1OSO/T1CKI/PGC RB6 T1OSO T1CKI PGC RB7/T1OSI/PGD RB7 T1OSI PGD VSS VDD
6
7
7 I/O I TTL ST(1) TTL ST ST TTL ST ST TTL ST ST TTL ST ST TTL TTL TTL ST ST ST(2) Bidirectional I/O pin. External interrupt pin. Bidirectional I/O pin. SPITM data in. I2CTM data. Bidirectional I/O pin. SPI data out. Capture input, Compare output, PWM output. Bidirectional I/O pin. Capture input, Compare output, PWM output. Low-Voltage ICSPTM Programming enable pin. Bidirectional I/O pin. Interrupt-on-change pin. Synchronous serial clock input/output for SPI. Synchronous serial clock input for I2C. Bidirectional I/O pin. Interrupt-on-change pin. Slave select for SPI in Slave mode. Interrupt-on-change pin. Timer1 Oscillator output. Timer1 clock input. In-circuit debugger and ICSP programming clock pin. Interrupt-on-change pin. Timer1 oscillator input. In-circuit debugger and ICSP programming data pin. Ground reference for logic and I/O pins. Positive supply for logic and I/O pins.
7
8
8 I/O I I/O
8
9
9 I/O O I/O
9
10
10 I/O I/O I
10
11
12 I/O I/O I
11
12
13 I/O I
12
13
15 I/O O I I
13
14
16 I/O I I TTL ST ST(2) - -
5 14
5, 6
3, 5
P P
15, 16 17, 19
Legend: I = Input O = Output I/O = Input/Output P = Power - = Not used TTL = TTL Input ST = Schmitt Trigger Input Note 1: This buffer is a Schmitt Trigger input when configured as the external interrupt. 2: This buffer is a Schmitt Trigger input when used in Serial Programming mode. 3: This buffer is a Schmitt Trigger input when configured in RC Oscillator mode and a CMOS input otherwise.
DS39598E-page 8
2004 Microchip Technology Inc.
PIC16F818/819
2.0 MEMORY ORGANIZATION
2.1 Program Memory Organization
There are two memory blocks in the PIC16F818/819. These are the program memory and the data memory. Each block has its own bus, so access to each block can occur during the same oscillator cycle. The data memory can be further broken down into the general purpose RAM and the Special Function Registers (SFRs). The operation of the SFRs that control the "core" are described here. The SFRs used to control the peripheral modules are described in the section discussing each individual peripheral module. The data memory area also contains the data EEPROM memory. This memory is not directly mapped into the data memory but is indirectly mapped. That is, an indirect address pointer specifies the address of the data EEPROM memory to read/write. The PIC16F818 device's 128 bytes of data EEPROM memory have the address range of 00h-7Fh and the PIC16F819 device's 256 bytes of data EEPROM memory have the address range of 00h-FFh. More details on the EEPROM memory can be found in Section 3.0 "Data EEPROM and Flash Program Memory". Additional information on device memory may be found in the "PICmicro(R) Mid-Range Reference Manual" (DS33023). The PIC16F818/819 devices have a 13-bit program counter capable of addressing an 8K x 14 program memory space. For the PIC16F818, the first 1K x 14 (0000h-03FFh) is physically implemented (see Figure 2-1). For the PIC16F819, the first 2K x 14 is located at 0000h-07FFh (see Figure 2-2). Accessing a location above the physically implemented address will cause a wraparound. For example, the same instruction will be accessed at locations 020h, 420h, 820h, C20h, 1020h, 1420h, 1820h and 1C20h. The Reset vector is at 0000h and the interrupt vector is at 0004h.
FIGURE 2-1:
PROGRAM MEMORY MAP AND STACK FOR PIC16F818
PC<12:0>
FIGURE 2-2:
PROGRAM MEMORY MAP AND STACK FOR PIC16F819
PC<12:0>
CALL, RETURN RETFIE, RETLW
13
CALL, RETURN RETFIE, RETLW
13
Stack Level 1 Stack Level 2
Stack Level 1 Stack Level 2
Stack Level 8 Reset Vector 0000h
Stack Level 8 Reset Vector 0000h
Interrupt Vector On-Chip Program Memory Page 0
0004h 0005h 03FFh 0400h
Interrupt Vector On-Chip Program Memory
0004h 0005h
Page 0 07FFh 0800h
Wraps to 0000h-03FFh
Wraps to 0000h-07FFh 1FFFh 1FFFh
2004 Microchip Technology Inc.
DS39598E-page 9
PIC16F818/819
2.2 Data Memory Organization
The data memory is partitioned into multiple banks that contain the General Purpose Registers and the Special Function Registers. Bits RP1 (Status<6>) and RP0 (Status<5>) are the bank select bits. RP1:RP0 00 01 10 11 Bank 0 1 2 3 Each bank extends up to 7Fh (128 bytes). The lower locations of each bank are reserved for the Special Function Registers. Above the Special Function Registers are the General Purpose Registers, implemented as static RAM. All implemented banks contain SFRs. Some "high use" SFRs from one bank may be mirrored in another bank for code reduction and quicker access (e.g., the Status register is in Banks 0-3). Note: EEPROM data memory description can be found in Section 3.0 "Data EEPROM and Flash Program Memory" of this data sheet.
2.2.1
GENERAL PURPOSE REGISTER FILE
The register file can be accessed either directly or indirectly through the File Select Register, FSR.
DS39598E-page 10
2004 Microchip Technology Inc.
PIC16F818/819
FIGURE 2-3: PIC16F818 REGISTER FILE MAP
File Address Indirect addr.(*) TMR0 PCL STATUS FSR PORTA PORTB 00h 01h 02h 03h 04h 05h 06h 07h 08h 09h 0Ah 0Bh 0Ch 0Dh 0Eh 0Fh 10h 11h 12h 13h 14h 15h 16h 17h 18h 19h 1Ah 1Bh 1Ch 1Dh 1Eh 1Fh 20h File Address Indirect addr.(*) 80h OPTION_REG 81h PCL 82h STATUS 83h FSR 84h TRISA 85h TRISB 86h 87h 88h 89h PCLATH 8Ah INTCON 8Bh PIE1 8Ch PIE2 8Dh PCON 8Eh OSCCON 8Fh OSCTUNE 90h 91h PR2 92h SSPADD 93h SSPSTAT 94h 95h 96h 97h 98h 99h 9Ah 9Bh 9Ch 9Dh ADRESL 9Eh 9Fh ADCON1 General A0h Purpose Register BFh 32 Bytes C0h Accesses 40h-7Fh File Address Indirect addr.(*) 100h 101h TMR0 102h PCL 103h STATUS 104h FSR 105h 106h PORTB 107h 108h 109h 10Ah PCLATH 10Bh INTCON 10Ch EEDATA EEADR 10Dh 10Eh EEDATH 10Fh EEADRH 110h File Address Indirect addr.(*) OPTION_REG PCL STATUS FSR TRISB 180h 181h 182h 183h 184h 185h 186h 187h 188h 189h 18Ah 18Bh 18Ch 18Dh 18Eh 18Fh 190h
PCLATH INTCON PIR1 PIR2 TMR1L TMR1H T1CON TMR2 T2CON SSPBUF SSPCON CCPR1L CCPR1H CCP1CON
PCLATH INTCON EECON1 EECON2 Reserved(1) Reserved(1)
ADRESH ADCON0
11Fh 120h
19Fh 1A0h
General Purpose Register 96 Bytes
Accesses 20h-7Fh
Accesses 20h-7Fh
7Fh Bank 0 Bank 1
FFh Bank 2
17Fh Bank 3
1FFh
Unimplemented data memory locations, read as `0'. * Not a physical register. Note 1: These registers are reserved; maintain these registers clear.
2004 Microchip Technology Inc.
DS39598E-page 11
PIC16F818/819
FIGURE 2-4: PIC16F819 REGISTER FILE MAP
File Address Indirect addr.(*) TMR0 PCL STATUS FSR PORTA PORTB 00h 01h 02h 03h 04h 05h 06h 07h 08h 09h 0Ah 0Bh 0Ch 0Dh 0Eh 0Fh 10h 11h 12h 13h 14h 15h 16h 17h 18h 19h 1Ah 1Bh 1Ch 1Dh 1Eh 1Fh 20h File Address Indirect addr.(*) 80h OPTION_REG 81h PCL 82h STATUS 83h FSR 84h TRISA 85h TRISB 86h 87h 88h 89h PCLATH 8Ah INTCON 8Bh PIE1 8Ch PIE2 8Dh PCON 8Eh OSCCON 8Fh OSCTUNE 90h 91h PR2 92h SSPADD 93h SSPSTAT 94h 95h 96h 97h 98h 99h 9Ah 9Bh 9Ch 9Dh ADRESL 9Eh 9Fh ADCON1 A0h General Purpose Register 80 Bytes EFh F0h FFh General Purpose Register 80 Bytes Accesses 70h-7Fh Bank 2 16Fh 170h 17Fh Bank 3 1FFh File Address Indirect addr.(*) 100h 101h TMR0 102h PCL 103h STATUS 104h FSR 105h 106h PORTB 107h 108h 109h 10Ah PCLATH 10Bh INTCON 10Ch EEDATA EEADR 10Dh 10Eh EEDATH 10Fh EEADRH 110h File Address Indirect addr.(*) OPTION_REG PCL STATUS FSR TRISB 180h 181h 182h 183h 184h 185h 186h 187h 188h 189h 18Ah 18Bh 18Ch 18Dh 18Eh 18Fh 190h
PCLATH INTCON PIR1 PIR2 TMR1L TMR1H T1CON TMR2 T2CON SSPBUF SSPCON CCPR1L CCPR1H CCP1CON
PCLATH INTCON EECON1 EECON2 Reserved(1) Reserved(1)
ADRESH ADCON0
11Fh 120h
19Fh 1A0h
General Purpose Register 96 Bytes
Accesses 20h-7Fh
7Fh Bank 0
Accesses 70h-7Fh Bank 1
Unimplemented data memory locations, read as `0'. * Not a physical register. Note 1: These registers are reserved; maintain these registers clear.
DS39598E-page 12
2004 Microchip Technology Inc.
PIC16F818/819
2.2.2 SPECIAL FUNCTION REGISTERS
The Special Function Registers are registers used by the CPU and peripheral modules for controlling the desired operation of the device. These registers are implemented as static RAM. A list of these registers is given in Table 2-1. The Special Function Registers can be classified into two sets: core (CPU) and peripheral. Those registers associated with the core functions are described in detail in this section. Those related to the operation of the peripheral features are described in detail in the peripheral feature section.
TABLE 2-1:
Address Bank 0 00h(1) 01h 02h(1) 03h(1) 04h(1) 05h 06h 07h 08h 09h 0Ah(1,2) 0Bh(1) 0Ch 0Dh 0Eh 0Fh 10h 11h 12h 13h 14h 15h 16h 17h 18h 19h 1Ah 1Bh 1Ch 1Dh 1Eh 1Fh Legend: Note 1: 2: 3: INDF TMR0 PCL STATUS FSR PORTA PORTB -- -- -- PCLATH INTCON PIR1 PIR2 TMR1L TMR1H T1CON TMR2 T2CON SSPBUF SSPCON CCPR1L CCPR1H CCP1CON -- -- -- -- -- -- ADRESH ADCON0 Name
SPECIAL FUNCTION REGISTER SUMMARY
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Value on POR, BOR Details on page:
Addressing this location uses contents of FSR to address data memory (not a physical register) Timer0 Module Register Program Counter's (PC) Least Significant Byte IRP RP1 RP0 TO PD Z DC C
0000 0000 xxxx xxxx 0000 0000 0001 1xxx xxxx xxxx xxx0 0000 xxxx xxxx -- -- --
23 53, 17 23 16 23 39 43 -- -- -- 23 18 20 21 57 57 57 63 64 71, 76 73 66, 67, 68 66, 67, 68 65 -- -- -- -- -- -- 81 81
Indirect Data Memory Address Pointer PORTA Data Latch when written; PORTA pins when read PORTB Data Latch when written; PORTB pins when read Unimplemented Unimplemented Unimplemented -- GIE -- -- -- PEIE ADIF -- -- TMR0IE -- -- Write Buffer for the upper 5 bits of the Program Counter INTE -- EEIF RBIE SSPIF -- TMR0IF CCP1IF -- INTF TMR2IF -- RBIF TMR1IF --
---0 0000 0000 000x -0-- 0000 ---0 ---xxxx xxxx xxxx xxxx
Holding Register for the Least Significant Byte of the 16-bit TMR1 Register Holding Register for the Most Significant Byte of the 16-bit TMR1 Register -- -- T1CKPS1 T1CKPS0 T1OSCEN T1SYNC TMR1CS TMR1ON
--00 0000 0000 0000
Timer2 Module Register -- TOUTPS3 TOUTPS2 TOUTPS1 TOUTPS0 TMR2ON T2CKPS1 T2CKPS0
-000 0000 xxxx xxxx
Synchronous Serial Port Receive Buffer/Transmit Register WCOL SSPOV SSPEN CKP SSPM3 SSPM2 SSPM1 SSPM0
0000 0000 xxxx xxxx xxxx xxxx
Capture/Compare/PWM Register (LSB) Capture/Compare/PWM Register (MSB) -- -- CCP1X CCP1Y CCP1M3 CCP1M2 CCP1M1 CCP1M0
--00 0000 -- -- -- -- -- -- xxxx xxxx
Unimplemented Unimplemented Unimplemented Unimplemented Unimplemented Unimplemented A/D Result Register High Byte ADCS1 ADCS0 CHS2 CHS1 CHS0 GO/DONE -- ADON
0000 00-0
x = unknown, u = unchanged, q = value depends on condition, - = unimplemented, read as `0', r = reserved. Shaded locations are unimplemented, read as `0'. These registers can be addressed from any bank. The upper byte of the program counter is not directly accessible. PCLATH is a holding register for the PC<12:8>, whose contents are transferred to the upper byte of the program counter. Pin 5 is an input only; the state of the TRISA5 bit has no effect and will always read `1'.
2004 Microchip Technology Inc.
DS39598E-page 13
PIC16F818/819
TABLE 2-1:
Address Bank 1 80h(1) 81h 82h(1) 83h(1) 84h(1) 85h 86h 87h 88h 89h 8Ah(1,2) 8Bh(1) 8Ch 8Dh 8Eh 8Fh 90h(1) 91h 92h 93h 94h 95h 96h 97h 98h 99h 9Ah 9Bh 9Ch 9Dh 9Eh 9Fh Legend: Note 1: 2: 3: PR2 SSPADD SSPSTAT -- -- -- -- -- -- -- -- -- ADRESL ADCON1 INDF OPTION_REG PCL STATUS FSR TRISA TRISB -- -- -- PCLATH INTCON PIE1 PIE2 PCON OSCCON OSCTUNE -- Addressing this location uses contents of FSR to address data memory (not a physical register) RBPU INTEDG T0CS T0SE PSA PS2 PS1 PS0 0000 0000 1111 1111 0000 0000 PD Z DC C 0001 1xxx xxxx xxxx 1111 1111 1111 1111 -- -- -- -- TMR0IE -- -- -- IRCF1 TUN5 Write Buffer for the upper 5 bits of the PC INTE -- EEIE -- IRCF0 TUN4 RBIE SSPIE -- -- -- TUN3 TMR0IF CCP1IE -- -- IOFS TUN2 INTF TMR2IE -- POR -- TUN1 RBIF TMR1IE -- BOR -- TUN0 ---0 0000 0000 000x -0-- 0000 ---0 ------- --qq -000 -0---00 0000 -- 1111 1111 0000 0000 R/W UA BF 0000 0000 -- -- -- -- -- -- -- -- -- xxxx xxxx -- PCFG3 PCFG2 PCFG1 PCFG0 00-- 0000 23 17, 54 23 16 23 39 43 -- -- -- 23 18 19 21 22 38 36 -- 68 71, 76 72 -- -- -- -- -- -- -- -- -- 81 82 Name
SPECIAL FUNCTION REGISTER SUMMARY (CONTINUED)
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Value on POR, BOR Details on page:
Program Counter's (PC) Least Significant Byte IRP RP1 RP0 TRISA5(3) TO
Indirect Data Memory Address Pointer TRISA7 TRISA6 PORTA Data Direction Register (TRISA<4:0>
PORTB Data Direction Register Unimplemented Unimplemented Unimplemented -- GIE -- -- -- -- -- -- PEIE ADIE -- -- IRCF2 --
Unimplemented Timer2 Period Register Synchronous Serial Port (I2CTM mode) Address Register SMP CKE D/A P S
Unimplemented Unimplemented Unimplemented Unimplemented Unimplemented Unimplemented Unimplemented Unimplemented Unimplemented A/D Result Register Low Byte ADFM ADCS2 --
x = unknown, u = unchanged, q = value depends on condition, - = unimplemented, read as `0', r = reserved. Shaded locations are unimplemented, read as `0'. These registers can be addressed from any bank. The upper byte of the program counter is not directly accessible. PCLATH is a holding register for the PC<12:8>, whose contents are transferred to the upper byte of the program counter. Pin 5 is an input only; the state of the TRISA5 bit has no effect and will always read `1'.
DS39598E-page 14
2004 Microchip Technology Inc.
PIC16F818/819
TABLE 2-1:
Address Bank 2 100h(1) 101h 102h(1 103h
(1)
SPECIAL FUNCTION REGISTER SUMMARY (CONTINUED)
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Value on POR, BOR Details on page:
Name
INDF TMR0 PCL STATUS FSR -- PORTB -- -- --
Addressing this location uses contents of FSR to address data memory (not a physical register) Timer0 Module Register Program Counter's (PC) Least Significant Byte IRP RP1 RP0 TO PD Z DC C
0000 0000 xxxx xxxx 0000 0000 0001 1xxx xxxx xxxx -- xxxx xxxx -- -- --
23 53 23 16 23 -- 43 -- -- -- 23 18 25 25 25 25
104h(1) 105h 106h 107h 108h 109h 10Bh(1) 10Ch 10Dh 10Eh 10Fh Bank 3 180h(1) 181h 182h(1) 183h
(1)
Indirect Data Memory Address Pointer Unimplemented PORTB Data Latch when written; PORTB pins when read Unimplemented Unimplemented Unimplemented -- GIE -- PEIE -- TMR0IE Write Buffer for the upper 5 bits of the Program Counter INTE RBIE TMR0IF INTF RBIF
10Ah(1,2) PCLATH INTCON EEDATA EEADR EEDATH EEADRH
---0 0000 0000 000x xxxx xxxx xxxx xxxx --xx xxxx
EEPROM/Flash Data Register Low Byte EEPROM/Flash Address Register Low Byte -- -- -- -- EEPROM/Flash Data Register High Byte -- -- -- EEPROM/Flash Address Register High Byte
---- -xxx
INDF OPTION_REG PCL STATUS FSR -- TRISB -- -- --
Addressing this location uses contents of FSR to address data memory (not a physical register) RBPU INTEDG T0CS T0SE PSA PS2 PS1 PS0
0000 0000 1111 1111 0000 0000
23 17, 54 23 16 23 -- 43 -- -- -- 23 18 26 25 -- --
Program Counter's (PC) Least Significant Byte IRP RP1 RP0 TO PD Z DC C
0001 1xxx xxxx xxxx -- 1111 1111 -- -- --
184h(1) 185h 186h 187h 188h 189h 18Bh(1) 18Ch 18Dh 18Eh 18Fh Legend: Note 1: 2: 3:
Indirect Data Memory Address Pointer Unimplemented PORTB Data Direction Register Unimplemented Unimplemented Unimplemented -- GIE EEPGD -- PEIE -- -- TMR0IE -- Write Buffer for the upper 5 bits of the Program Counter INTE FREE RBIE WRERR TMR0IF WREN INTF WR RBIF RD
18Ah(1,2) PCLATH INTCON EECON1 EECON2 -- --
---0 0000 0000 000x x--x x000 ---- ---0000 0000 0000 0000
EEPROM Control Register 2 (not a physical register) Reserved; maintain clear Reserved; maintain clear
x = unknown, u = unchanged, q = value depends on condition, - = unimplemented, read as `0', r = reserved. Shaded locations are unimplemented, read as `0'. These registers can be addressed from any bank. The upper byte of the program counter is not directly accessible. PCLATH is a holding register for the PC<12:8>, whose contents are transferred to the upper byte of the program counter. Pin 5 is an input only; the state of the TRISA5 bit has no effect and will always read `1'.
2004 Microchip Technology Inc.
DS39598E-page 15
PIC16F818/819
2.2.2.1 Status Register
The Status register, shown in Register 2-1, contains the arithmetic status of the ALU, the Reset status and the bank select bits for data memory. The Status register can be the destination for any instruction, as with any other register. If the Status register is the destination for an instruction that affects the Z, DC or C bits, then the write to these three bits is disabled. These bits are set or cleared according to the device logic. Furthermore, the TO and PD bits are not writable. Therefore, the result of an instruction with the Status register as destination may be different than intended. For example, CLRF STATUS, will clear the upper three bits and set the Z bit. This leaves the Status register as `000u u1uu' (where u = unchanged). It is recommended, therefore, that only BCF, BSF, SWAPF and MOVWF instructions are used to alter the Status register because these instructions do not affect the Z, C or DC bits from the Status register. For other instructions not affecting any status bits, see Section 13.0 "Instruction Set Summary". Note: The C and DC bits operate as a borrow and digit borrow bit, respectively, in subtraction. See the SUBLW and SUBWF instructions for examples.
REGISTER 2-1:
STATUS: STATUS REGISTER (ADDRESS 03h, 83h, 103h, 183h)
R/W-0 IRP bit 7 R/W-0 RP1 R/W-0 RP0 R-1 TO R-1 PD R/W-x Z R/W-x DC R/W-x C bit 0
bit 7
IRP: Register Bank Select bit (used for indirect addressing) 1 = Bank 2, 3 (100h-1FFh) 0 = Bank 0, 1 (00h-FFh) RP<1:0>: Register Bank Select bits (used for direct addressing) 11 = Bank 3 (180h-1FFh) 10 = Bank 2 (100h-17Fh) 01 = Bank 1 (80h-FFh) 00 = Bank 0 (00h-7Fh) Each bank is 128 bytes. TO: Time-out bit 1 = After power-up, CLRWDT instruction or SLEEP instruction 0 = A WDT time-out occurred PD: Power-down bit 1 = After power-up or by the CLRWDT instruction 0 = By execution of the SLEEP instruction Z: Zero bit 1 = The result of an arithmetic or logic operation is zero 0 = The result of an arithmetic or logic operation is not zero DC: Digit carry/borrow bit (ADDWF, ADDLW, SUBLW and SUBWF instructions)(1) 1 = A carry-out from the 4th low order bit of the result occurred 0 = No carry-out from the 4th low order bit of the result C: Carry/borrow bit (ADDWF, ADDLW, SUBLW and SUBWF instructions)(1,2) 1 = A carry-out from the Most Significant bit of the result occurred 0 = No carry-out from the Most Significant bit of the result occurred Note 1: For borrow, the polarity is reversed. A subtraction is executed by adding the two's complement of the second operand. 2: For rotate (RRF, RLF) instructions, this bit is loaded with either the high or low-order bit of the source register. Legend: R = Readable bit -n = Value at POR W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown
bit 6-5
bit 4
bit 3
bit 2
bit 1
bit 0
DS39598E-page 16
2004 Microchip Technology Inc.
PIC16F818/819
2.2.2.2 OPTION_REG Register
Note: The OPTION_REG register is a readable and writable register that contains various control bits to configure the TMR0 prescaler/WDT postscaler (single assignable register known also as the prescaler), the external INT interrupt, TMR0 and the weak pull-ups on PORTB. To achieve a 1:1 prescaler assignment for the TMR0 register, assign the prescaler to the Watchdog Timer.
REGISTER 2-2:
OPTION_REG: OPTION REGISTER (ADDRESS 81h, 181h)
R/W-1 RBPU bit 7 R/W-1 INTEDG R/W-1 T0CS R/W-1 T0SE R/W-1 PSA R/W-1 PS2 R/W-1 PS1 R/W-1 PS0 bit 0
bit 7
RBPU: PORTB Pull-up Enable bit 1 = PORTB pull-ups are disabled 0 = PORTB pull-ups are enabled by individual port latch values INTEDG: Interrupt Edge Select bit 1 = Interrupt on rising edge of RB0/INT pin 0 = Interrupt on falling edge of RB0/INT pin T0CS: TMR0 Clock Source Select bit 1 = Transition on T0CKI pin 0 = Internal instruction cycle clock (CLKO) T0SE: TMR0 Source Edge Select bit 1 = Increment on high-to-low transition on T0CKI pin 0 = Increment on low-to-high transition on T0CKI pin PSA: Prescaler Assignment bit 1 = Prescaler is assigned to the WDT 0 = Prescaler is assigned to the Timer0 module PS2:PS0: Prescaler Rate Select bits Bit Value TMR0 Rate WDT Rate 1:2 000 1:1 1:4 001 1:2 1:8 010 1:4 1 : 16 011 1:8 1 : 32 100 1 : 16 1 : 64 101 1 : 32 1 : 128 110 1 : 64 111 1 : 256 1 : 128
bit 6
bit 5
bit 4
bit 3
bit 2-0
Legend: R = Readable bit -n = Value at POR W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown
2004 Microchip Technology Inc.
DS39598E-page 17
PIC16F818/819
2.2.2.3 INTCON Register
Note: The INTCON register is a readable and writable register that contains various enable and flag bits for the TMR0 register overflow, RB port change and external RB0/INT pin interrupts. Interrupt flag bits get set when an interrupt condition occurs regardless of the state of its corresponding enable bit or the Global Interrupt Enable bit, GIE (INTCON<7>). User software should ensure the appropriate interrupt flag bits are clear prior to enabling an interrupt.
REGISTER 2-3:
INTCON: INTERRUPT CONTROL REGISTER (ADDRESS 0Bh, 8Bh, 10Bh, 18Bh)
R/W-0 GIE bit 7 R/W-0 PEIE R/W-0 TMR0IE R/W-0 INTE R/W-0 RBIE R/W-0 TMR0IF R/W-0 INTF R/W-x RBIF bit 0
bit 7
GIE: Global Interrupt Enable bit 1 = Enables all unmasked interrupts 0 = Disables all interrupts PEIE: Peripheral Interrupt Enable bit 1 = Enables all unmasked peripheral interrupts 0 = Disables all peripheral interrupts TMR0IE: TMR0 Overflow Interrupt Enable bit 1 = Enables the TMR0 interrupt 0 = Disables the TMR0 interrupt INTE: RB0/INT External Interrupt Enable bit 1 = Enables the RB0/INT external interrupt 0 = Disables the RB0/INT external interrupt RBIE: RB Port Change Interrupt Enable bit 1 = Enables the RB port change interrupt 0 = Disables the RB port change interrupt TMR0IF: TMR0 Overflow Interrupt Flag bit 1 = TMR0 register has overflowed (must be cleared in software) 0 = TMR0 register did not overflow INTF: RB0/INT External Interrupt Flag bit 1 = The RB0/INT external interrupt occurred (must be cleared in software) 0 = The RB0/INT external interrupt did not occur RBIF: RB Port Change Interrupt Flag bit A mismatch condition will continue to set flag bit RBIF. Reading PORTB will end the mismatch condition and allow flag bit RBIF to be cleared. 1 = At least one of the RB7:RB4 pins changed state (must be cleared in software) 0 = None of the RB7:RB4 pins have changed state Legend: R = Readable bit -n = Value at POR W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown
bit 6
bit 5
bit 4
bit 3
bit 2
bit 1
bit 0
DS39598E-page 18
2004 Microchip Technology Inc.
PIC16F818/819
2.2.2.4 PIE1 Register
This register contains the individual enable bits for the peripheral interrupts. Note: Bit PEIE (INTCON<6>) must be set to enable any peripheral interrupt.
REGISTER 2-4:
PIE1: PERIPHERAL INTERRUPT ENABLE REGISTER 1 (ADDRESS 8Ch)
U-0 -- bit 7 R/W-0 ADIE U-0 -- U-0 -- R/W-0 SSPIE R/W-0 CCP1IE R/W-0 TMR2IE R/W-0 TMR1IE bit 0
bit 7 bit 6
Unimplemented: Read as `0' ADIE: A/D Converter Interrupt Enable bit 1 = Enables the A/D converter interrupt 0 = Disables the A/D converter interrupt Unimplemented: Read as `0' SSPIE: Synchronous Serial Port Interrupt Enable bit 1 = Enables the SSP interrupt 0 = Disables the SSP interrupt CCP1IE: CCP1 Interrupt Enable bit 1 = Enables the CCP1 interrupt 0 = Disables the CCP1 interrupt TMR2IE: TMR2 to PR2 Match Interrupt Enable bit 1 = Enables the TMR2 to PR2 match interrupt 0 = Disables the TMR2 to PR2 match interrupt TMR1IE: TMR1 Overflow Interrupt Enable bit 1 = Enables the TMR1 overflow interrupt 0 = Disables the TMR1 overflow interrupt Legend: R = Readable bit -n = Value at POR W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown
bit 5-4 bit 3
bit 2
bit 1
bit 0
2004 Microchip Technology Inc.
DS39598E-page 19
PIC16F818/819
2.2.2.5 PIR1 Register
Note: This register contains the individual flag bits for the peripheral interrupts. Interrupt flag bits are set when an interrupt condition occurs regardless of the state of its corresponding enable bit or the Global Interrupt Enable bit, GIE (INTCON<7>). User software should ensure the appropriate interrupt flag bits are clear prior to enabling an interrupt.
REGISTER 2-5:
PIR1: PERIPHERAL INTERRUPT REQUEST (FLAG) REGISTER 1 (ADDRESS 0Ch)
U-0 -- bit 7 R/W-0 ADIF U-0 -- U-0 -- R/W-0 SSPIF R/W-0 CCP1IF R/W-0 TMR2IF R/W-0 TMR1IF bit 0
bit 7 bit 6
Unimplemented: Read as `0' ADIF: A/D Converter Interrupt Flag bit 1 = An A/D conversion completed 0 = The A/D conversion is not complete Unimplemented: Read as `0' SSPIF: Synchronous Serial Port (SSP) Interrupt Flag bit 1 = The SSP interrupt condition has occurred and must be cleared in software before returning from the Interrupt Service Routine. The conditions that will set this bit are a transmission/ reception has taken place. 0 = No SSP interrupt condition has occurred CCP1IF: CCP1 Interrupt Flag bit Capture mode: 1 = A TMR1 register capture occurred (must be cleared in software) 0 = No TMR1 register capture occurred Compare mode: 1 = A TMR1 register compare match occurred (must be cleared in software) 0 = No TMR1 register compare match occurred PWM mode: Unused in this mode. TMR2IF: TMR2 to PR2 Match Interrupt Flag bit 1 = TMR2 to PR2 match occurred (must be cleared in software) 0 = No TMR2 to PR2 match occurred TMR1IF: TMR1 Overflow Interrupt Flag bit 1 = TMR1 register overflowed (must be cleared in software) 0 = TMR1 register did not overflow Legend: R = Readable bit -n = Value at POR W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown
bit 5-4 bit 3
bit 2
bit 1
bit 0
DS39598E-page 20
2004 Microchip Technology Inc.
PIC16F818/819
2.2.2.6 PIE2 Register
The PIE2 register contains the individual enable bit for the EEPROM write operation interrupt.
REGISTER 2-6:
PIE2: PERIPHERAL INTERRUPT ENABLE REGISTER 2 (ADDRESS 8Dh)
U-0 -- bit 7 U-0 -- U-0 -- R/W-0 EEIE U-0 -- U-0 -- U-0 -- U-0 -- bit 0
bit 7-5 bit 4
Unimplemented: Read as `0' EEIE: EEPROM Write Operation Interrupt Enable bit 1 = Enable EE write interrupt 0 = Disable EE write interrupt Unimplemented: Read as `0' Legend: R = Readable bit -n = Value at POR
bit 3-0
W = Writable bit `1' = Bit is set
U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown
2.2.2.7
PIR2 Register
. Note: Interrupt flag bits are set when an interrupt condition occurs regardless of the state of its corresponding enable bit or the Global Interrupt Enable bit, GIE (INTCON<7>). User software should ensure the appropriate interrupt flag bits are clear prior to enabling an interrupt.
The PIR2 register contains the flag bit for the EEPROM write operation interrupt.
REGISTER 2-7:
PIR2: PERIPHERAL INTERRUPT REQUEST (FLAG) REGISTER 2 (ADDRESS 0Dh)
U-0 -- bit 7 U-0 -- U-0 -- R/W-0 EEIF U-0 -- U-0 -- U-0 -- U-0 -- bit 0
bit 7-5 bit 4
Unimplemented: Read as `0' EEIF: EEPROM Write Operation Interrupt Enable bit 1 = Enable EE write interrupt 0 = Disable EE write interrupt Unimplemented: Read as `0' Legend: R = Readable bit -n = Value at POR
bit 3-0
W = Writable bit `1' = Bit is set
U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown
2004 Microchip Technology Inc.
DS39598E-page 21
PIC16F818/819
2.2.2.8
Note:
PCON Register
Interrupt flag bits get set when an interrupt condition occurs regardless of the state of its corresponding enable bit or the Global Interrupt Enable bit, GIE (INTCON<7>). User software should ensure the appropriate interrupt flag bits are clear prior to enabling an interrupt.
Note:
BOR is unknown on Power-on Reset. It must then be set by the user and checked on subsequent Resets to see if BOR is clear, indicating a brown-out has occurred. The BOR status bit is a `don't care' and is not necessarily predictable if the brownout circuit is disabled (by clearing the BOREN bit in the Configuration word).
The Power Control (PCON) register contains a flag bit to allow differentiation between a Power-on Reset (POR), a Brown-out Reset, an external MCLR Reset and WDT Reset.
REGISTER 2-8:
PCON: POWER CONTROL REGISTER (ADDRESS 8Eh)
U-0 -- bit 7 U-0 -- U-0 -- U-0 -- U-0 -- U-0 -- R/W-0 POR R/W-x BOR bit 0
bit 7-2 bit 1
Unimplemented: Read as `0' POR: Power-on Reset Status bit 1 = No Power-on Reset occurred 0 = A Power-on Reset occurred (must be set in software after a Power-on Reset occurs) BOR: Brown-out Reset Status bit 1 = No Brown-out Reset occurred 0 = A Brown-out Reset occurred (must be set in software after a Brown-out Reset occurs) Legend: R = Readable bit -n = Value at POR W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown
bit 0
DS39598E-page 22
2004 Microchip Technology Inc.
PIC16F818/819
2.3 PCL and PCLATH
The Program Counter (PC) is 13 bits wide. The low byte comes from the PCL register, which is a readable and writable register. The upper bits (PC<12:8>) are not readable but are indirectly writable through the PCLATH register. On any Reset, the upper bits of the PC will be cleared. Figure 2-5 shows the two situations for the loading of the PC. The upper example in the figure shows how the PC is loaded on a write to PCL (PCLATH<4:0> PCH). The lower example in the figure shows how the PC is loaded during a CALL or GOTO instruction (PCLATH<4:3> PCH). The stack operates as a circular buffer. This means that after the stack has been PUSHed eight times, the ninth push overwrites the value that was stored from the first push. The tenth push overwrites the second push (and so on). Note 1: There are no status bits to indicate stack overflow or stack underflow conditions. 2: There are no instructions/mnemonics called PUSH or POP. These are actions that occur from the execution of the CALL, RETURN, RETLW and RETFIE instructions or the vectoring to an interrupt address.
FIGURE 2-5:
LOADING OF PC IN DIFFERENT SITUATIONS
PCL 8 7 0 Instruction with PCL as Destination ALU
2.4
Indirect Addressing: INDF and FSR Registers
PCH 12 PC 5
PCLATH<4:0>
8
The INDF register is not a physical register. Addressing INDF actually addresses the register whose address is contained in the FSR register (FSR is a pointer). This is indirect addressing.
PCLATH PCH 12 PC 2 PCLATH<4:3> 11 Opcode <10:0> PCLATH 11 10 8 7 PCL 0 GOTO,CALL
EXAMPLE 2-1:
* * * *
INDIRECT ADDRESSING
Register file 05 contains the value 10h Register file 06 contains the value 0Ah Load the value 05 into the FSR register A read of the INDF register will return the value of 10h * Increment the value of the FSR register by one (FSR = 06) * A read of the INDF register now will return the value of 0Ah Reading INDF itself indirectly (FSR = 0) will produce 00h. Writing to the INDF register indirectly results in a no operation (although status bits may be affected). A simple program to clear RAM locations, 20h-2Fh, using indirect addressing is shown in Example 2-2.
2.3.1
COMPUTED GOTO
A computed GOTO is accomplished by adding an offset to the program counter (ADDWF PCL). When doing a table read using a computed GOTO method, care should be exercised if the table location crosses a PCL memory boundary (each 256-byte block). Refer to the application note AN556, "Implementing a Table Read" (DS00556).
EXAMPLE 2-2:
2.3.2
STACK
NEXT MOVLW MOVWF CLRF INCF BTFSS GOTO :
HOW TO CLEAR RAM USING INDIRECT ADDRESSING
0x20 ;initialize pointer FSR ;to RAM INDF ;clear INDF register FSR ;inc pointer FSR, 4 ;all done? NEXT ;NO, clear next ;YES, continue
The PIC16F818/819 family has an 8-level deep x 13-bit wide hardware stack. The stack space is not part of either program or data space and the Stack Pointer is not readable or writable. The PC is PUSHed onto the stack when a CALL instruction is executed or an interrupt causes a branch. The stack is POPed in the event of a RETURN, RETLW or a RETFIE instruction execution. PCLATH is not affected by a PUSH or POP operation.
CONTINUE
An effective 9-bit address is obtained by concatenating the 8-bit FSR register and the IRP bit (Status<7>) as shown in Figure 2-6.
2004 Microchip Technology Inc.
DS39598E-page 23
PIC16F818/819
FIGURE 2-6: DIRECT/INDIRECT ADDRESSING
Indirect Addressing 0 IRP 7 FSR Register 0 Direct Addressing RP1:RP0 6 From Opcode
Bank Select
Location Select 00 00h 80h 01 10 100h 11 180h
Bank Select
Location Select
Data Memory(1)
7Fh Bank 0 Note 1:
FFh Bank 1
17Fh Bank 2
1FFh Bank 3
For register file map detail, see Figure 2-3 or Figure 2-4.
DS39598E-page 24
2004 Microchip Technology Inc.
PIC16F818/819
3.0 DATA EEPROM AND FLASH PROGRAM MEMORY
When the device is code-protected, the CPU may continue to read and write the data EEPROM memory. Depending on the settings of the write-protect bits, the device may or may not be able to write certain blocks of the program memory; however, reads of the program memory are allowed. When code-protected, the device programmer can no longer access data or program memory; this does NOT inhibit internal reads or writes.
The data EEPROM and Flash program memory are readable and writable during normal operation (over the full VDD range). This memory is not directly mapped in the register file space. Instead, it is indirectly addressed through the Special Function Registers. There are six SFRs used to read and write this memory: * * * * * * EECON1 EECON2 EEDATA EEDATH EEADR EEADRH
3.1
EEADR and EEADRH
This section focuses on reading and writing data EEPROM and Flash program memory during normal operation. Refer to the appropriate device programming specification document for serial programming information. When interfacing the data memory block, EEDATA holds the 8-bit data for read/write and EEADR holds the address of the EEPROM location being accessed. These devices have 128 or 256 bytes of data EEPROM, with an address range from 00h to 0FFh. Addresses from 80h to FFh are unimplemented on the PIC16F818 device and will read 00h. When writing to unimplemented locations, the charge pump will be turned off. When interfacing the program memory block, the EEDATA and EEDATH registers form a two-byte word that holds the 14-bit data for read/write and the EEADR and EEADRH registers form a two-byte word that holds the 13-bit address of the EEPROM location being accessed. These devices have 1K or 2K words of program Flash, with an address range from 0000h to 03FFh for the PIC16F818 and 0000h to 07FFh for the PIC16F819. Addresses above the range of the respective device will wraparound to the beginning of program memory. The EEPROM data memory allows single byte read and write. The Flash program memory allows singleword reads and four-word block writes. Program memory writes must first start with a 32-word block erase, then write in 4-word blocks. A byte write in data EEPROM memory automatically erases the location and writes the new data (erase before write). The write time is controlled by an on-chip timer. The write/erase voltages are generated by an on-chip charge pump, rated to operate over the voltage range of the device for byte or word operations.
The EEADRH:EEADR register pair can address up to a maximum of 256 bytes of data EEPROM or up to a maximum of 8K words of program EEPROM. When selecting a data address value, only the LSB of the address is written to the EEADR register. When selecting a program address value, the MSB of the address is written to the EEADRH register and the LSB is written to the EEADR register. If the device contains less memory than the full address reach of the address register pair, the Most Significant bits of the registers are not implemented. For example, if the device has 128 bytes of data EEPROM, the Most Significant bit of EEADR is not implemented on access to data EEPROM.
3.2
EECON1 and EECON2 Registers
EECON1 is the control register for memory accesses. Control bit, EEPGD, determines if the access will be a program or data memory access. When clear, as it is when Reset, any subsequent operations will operate on the data memory. When set, any subsequent operations will operate on the program memory. Control bits, RD and WR, initiate read and write, respectively. These bits cannot be cleared, only set in software. They are cleared in hardware at completion of the read or write operation. The inability to clear the WR bit in software prevents the accidental, premature termination of a write operation. The WREN bit, when set, will allow a write or erase operation. On power-up, the WREN bit is clear. The WRERR bit is set when a write (or erase) operation is interrupted by a MCLR or a WDT Time-out Reset during normal operation. In these situations, following Reset, the user can check the WRERR bit and rewrite the location. The data and address will be unchanged in the EEDATA and EEADR registers. Interrupt flag bit, EEIF in the PIR2 register, is set when the write is complete. It must be cleared in software. EECON2 is not a physical register. Reading EECON2 will read all `0's. The EECON2 register is used exclusively in the EEPROM write sequence.
2004 Microchip Technology Inc.
DS39598E-page 25
PIC16F818/819
REGISTER 3-1: EECON1: EEPROM ACCESS CONTROL REGISTER 1 (ADDRESS 18Ch)
R/W-x EEPGD bit 7 bit 7 EEPGD: Program/Data EEPROM Select bit 1 = Accesses program memory 0 = Accesses data memory Reads `0' after a POR; this bit cannot be changed while a write operation is in progress. Unimplemented: Read as `0' FREE: EEPROM Forced Row Erase bit 1 = Erase the program memory row addressed by EEADRH:EEADR on the next WR command 0 = Perform write-only WRERR: EEPROM Error Flag bit 1 = A write operation is prematurely terminated (any MCLR or any WDT Reset during normal operation) 0 = The write operation completed WREN: EEPROM Write Enable bit 1 = Allows write cycles 0 = Inhibits write to the EEPROM WR: Write Control bit 1 = Initiates a write cycle. The bit is cleared by hardware once write is complete. The WR bit can only be set (not cleared) in software. 0 = Write cycle to the EEPROM is complete RD: Read Control bit 1 = Initiates an EEPROM read, RD is cleared in hardware. The RD bit can only be set (not cleared) in software. 0 = Does not initiate an EEPROM read Legend: R = Readable bit -n = Value at POR W = Writable bit `1' = Bit is set S = Set only `0' = Bit is cleared U = Unimplemented bit, read as `0' x = Bit is unknown U-0 -- U-0 -- R/W-x FREE R/W-x WRERR R/W-0 WREN R/S-0 WR R/S-0 RD bit 0
bit 6-5 bit 4
bit 3
bit 2
bit 1
bit 0
DS39598E-page 26
2004 Microchip Technology Inc.
PIC16F818/819
3.3 Reading Data EEPROM Memory
The steps to write to EEPROM data memory are: 1. If step 10 is not implemented, check the WR bit to see if a write is in progress. 2. Write the address to EEADR. Make sure that the address is not larger than the memory size of the device. 3. Write the 8-bit data value to be programmed in the EEDATA register. 4. Clear the EEPGD bit to point to EEPROM data memory. 5. Set the WREN bit to enable program operations. 6. Disable interrupts (if enabled). 7. Execute the special five instruction sequence: * Write 55h to EECON2 in two steps (first to W, then to EECON2) * Write AAh to EECON2 in two steps (first to W, then to EECON2) * Set the WR bit 8. Enable interrupts (if using interrupts). 9. Clear the WREN bit to disable program operations. 10. At the completion of the write cycle, the WR bit is cleared and the EEIF interrupt flag bit is set (EEIF must be cleared by firmware). If step 1 is not implemented, then firmware should check for EEIF to be set, or WR to be clear, to indicate the end of the program cycle. To read a data memory location, the user must write the address to the EEADR register, clear the EEPGD control bit (EECON1<7>) and then set control bit, RD (EECON1<0>). The data is available in the very next cycle in the EEDATA register; therefore, it can be read in the next instruction (see Example 3-1). EEDATA will hold this value until another read or until it is written to by the user (during a write operation). The steps to reading the EEPROM data memory are: 1. Write the address to EEADR. Make sure that the address is not larger than the memory size of the device. Clear the EEPGD bit to point to EEPROM data memory. Set the RD bit to start the read operation. Read the data from the EEDATA register.
2. 3. 4.
EXAMPLE 3-1:
BANKSEL EEADR MOVF ADDR, W MOVWF EEADR
DATA EEPROM READ
Select Bank of EEADR Data Memory Address to read Select Bank of EECON1 Point to Data memory EE Read Select Bank of EEDATA W = EEDATA
; ; ; ; BANKSEL EECON1 ; BCF EECON1, EEPGD ; BSF EECON1, RD ; BANKSEL EEDATA ; MOVF EEDATA, W ;
3.4
Writing to Data EEPROM Memory
EXAMPLE 3-2:
BANKSEL EECON1
DATA EEPROM WRITE
Select Bank of EECON1 Wait for write to complete Select Bank of EEADR Data Memory Address to write Data Memory Value to write Select Bank of EECON1 Point to DATA memory Enable writes Disable INTs. Write 55h Write AAh Set WR bit to begin write Enable INTs. Disable writes
To write an EEPROM data location, the user must first write the address to the EEADR register and the data to the EEDATA register. Then, the user must follow a specific write sequence to initiate the write for each byte. The write will not initiate if the write sequence is not exactly followed (write 55h to EECON2, write AAh to EECON2, then set WR bit) for each byte. We strongly recommend that interrupts be disabled during this code segment (see Example 3-2). Additionally, the WREN bit in EECON1 must be set to enable write. This mechanism prevents accidental writes to data EEPROM due to errant (unexpected) code execution (i.e., lost programs). The user should keep the WREN bit clear at all times except when updating EEPROM. The WREN bit is not cleared by hardware After a write sequence has been initiated, clearing the WREN bit will not affect this write cycle. The WR bit will be inhibited from being set unless the WREN bit is set. At the completion of the write cycle, the WR bit is cleared in hardware and the EE Write Complete Interrupt Flag bit (EEIF) is set. The user can either enable this interrupt or poll this bit. EEIF must be cleared by software.
; ; BTFSC EECON1, WR ; GOTO $-1 ; BANKSEL EEADR ; ; MOVF ADDR, W ; MOVWF EEADR ; ; MOVF VALUE, W ; MOVWF EEDATA ; ; BANKSEL EECON1 ; ; BCF EECON1, EEPGD ; ; BSF EECON1, WREN ; BCF MOVLW MOVWF MOVLW MOVWF BSF BSF BCF INTCON, GIE 55h EECON2 AAh EECON2 EECON1, WR INTCON, GIE EECON1, WREN ; ; ; ; ; ; ; ; ;
2004 Microchip Technology Inc.
Required Sequence
DS39598E-page 27
PIC16F818/819
3.5 Reading Flash Program Memory 3.6 Erasing Flash Program Memory
To read a program memory location, the user must write two bytes of the address to the EEADR and EEADRH registers, set the EEPGD control bit (EECON1<7>) and then set control bit, RD (EECON1<0>). Once the read control bit is set, the program memory Flash controller will use the second instruction cycle to read the data. This causes the second instruction immediately following the "BSF EECON1, RD" instruction to be ignored. The data is available in the very next cycle in the EEDATA and EEDATH registers; therefore, it can be read as two bytes in the following instructions. EEDATA and EEDATH registers will hold this value until another read or until it is written to by the user (during a write operation). The minimum erase block is 32 words. Only through the use of an external programmer, or through ICSP control, can larger blocks of program memory be bulk erased. Word erase in the Flash array is not supported. When initiating an erase sequence from the microcontroller itself, a block of 32 words of program memory is erased. The Most Significant 11 bits of the EEADRH:EEADR point to the block being erased. EEADR< 4:0> are ignored. The EECON1 register commands the erase operation. The EEPGD bit must be set to point to the Flash program memory. The WREN bit must be set to enable write operations. The FREE bit is set to select an erase operation. For protection, the write initiate sequence for EECON2 must be used. After the "BSF EECON1, WR" instruction, the processor requires two cycles to set up the erase operation. The user must place two NOP instructions after the WR bit is set. The processor will halt internal operations for the typical 2 ms, only during the cycle in which the erase takes place. This is not Sleep mode, as the clocks and peripherals will continue to run. After the erase cycle, the processor will resume operation with the third instruction after the EECON1 write instruction.
EXAMPLE 3-3:
BANKSEL EEADRH MOVF ADDRH, W MOVWF EEADRH
FLASH PROGRAM READ
Select Bank of EEADRH MS Byte of Program Address to read LS Byte of Program Address to read Select Bank of EECON1 Point to PROGRAM memory EE Read Any instructions here are ignored as program memory is read in second cycle after BSF EECON1,RD Select Bank of EEDATA DATAL = EEDATA DATAH = EEDATH
; ; ; ; MOVF ADDRL, W ; MOVWF EEADR ; ; BANKSEL EECON1 ; BSF EECON1, EEPGD ; ; BSF EECON1, RD ; ; NOP ; ; NOP ; ; ; BANKSEL EEDATA ; MOVF EEDATA, W ; MOVWF DATAL ; MOVF EEDATH, W ; MOVWF DATAH ;
3.6.1
FLASH PROGRAM MEMORY ERASE SEQUENCE
The sequence of events for erasing a block of internal program memory location is: 1. 2. Load EEADRH:EEADR with address of row being erased. Set EEPGD bit to point to program memory; set WREN bit to enable writes and set FREE bit to enable the erase. Disable interrupts. Write 55h to EECON2. Write AAh to EECON2. Set the WR bit. This will begin the row erase cycle. The CPU will stall for duration of the erase.
3. 4. 5. 6. 7.
DS39598E-page 28
2004 Microchip Technology Inc.
PIC16F818/819
EXAMPLE 3-4:
BANKSEL MOVF MOVWF MOVF MOVWF ERASE_ROW BANKSEL BSF BSF BSF ; BCF MOVLW MOVWF MOVLW MOVWF BSF NOP NOP BCF BCF BSF EECON1, FREE EECON1, WREN INTCON, GIE INTCON, GIE 55h EECON2 AAh EECON2 EECON1, WR ; ; ; ; ; ; ; ; ; ; ; ; ; Disable interrupts (if using) Write 55h Write AAh Start Erase (CPU stall) Any instructions here are ignored as processor halts to begin Erase sequence processor will stop here and wait for Erase complete after Erase processor continues with 3rd instruction Disable Row Erase operation Disable writes Enable interrupts (if using) EECON1 EECON1, EEPGD EECON1, WREN EECON1, FREE ; ; ; ; Select Bank of EECON1 Point to PROGRAM memory Enable Write to memory Enable Row Erase operation
ERASING A FLASH PROGRAM MEMORY ROW
EEADRH ADDRH, W EEADRH ADDRL, W EEADR ; Select Bank of EEADRH ; ; MS Byte of Program Address to Erase ; ; LS Byte of Program Address to Erase
2004 Microchip Technology Inc.
DS39598E-page 29
PIC16F818/819
3.7 Writing to Flash Program Memory
Flash program memory may only be written to if the destination address is in a segment of memory that is not write-protected, as defined in bits WRT1:WRT0 of the device Configuration Word (Register 12-1). Flash program memory must be written in four-word blocks. A block consists of four words with sequential addresses, with a lower boundary defined by an address, where EEADR<1:0> = 00. At the same time, all block writes to program memory are done as writeonly operations. The program memory must first be erased. The write operation is edge-aligned and cannot occur across boundaries. To write to the program memory, the data must first be loaded into the buffer registers. There are four 14-bit buffer registers and they are addressed by the low 2 bits of EEADR. The following sequence of events illustrate how to perform a write to program memory: * Set the EEPGD and WREN bits in the EECON1 register * Clear the FREE bit in EECON1 * Write address to EEADRH:EEADR * Write data to EEDATH:EEDATA * Write 55 to EECON2 * Write AA to EECON2 * Set WR bit in EECON 1 The user must follow the same specific sequence to initiate the write for each word in the program block by writing each program word in sequence (00, 01, 10, 11). There are 4 buffer register words and all four locations MUST be written to with correct data. After the "BSF EECON1, WR" instruction, if EEADR xxxxxx11, then a short write will occur. This short write-only transfers the data to the buffer register. The WR bit will be cleared in hardware after one cycle. After the "BSF EECON1, WR" instruction, if EEADR = xxxxxx11, then a long write will occur. This will simultaneously transfer the data from EEDATH:EEDATA to the buffer registers and begin the write of all four words. The processor will execute the next instruction and then ignore the subsequent instruction. The user should place NOP instructions into the second words. The processor will then halt internal operations for typically 2 msec in which the write takes place. This is not a Sleep mode, as the clocks and peripherals will continue to run. After the write cycle, the processor will resume operation with the 3rd instruction after the EECON1 write instruction. After each long write, the 4 buffer registers will be reset to 3FFF.
FIGURE 3-1:
BLOCK WRITES TO FLASH PROGRAM MEMORY
7 5 EEDATH 07 EEDATA 0
6
First word of block to be written
8
All buffers are transferred to Flash automatically after this word is written
14
EEADR<1:0> = 00 EEADR<1:0> = 01
14
EEADR<1:0> = 10
14
EEADR<1:0> = 11
14
Buffer Register
Buffer Register
Buffer Register
Buffer Register
Program Memory
DS39598E-page 30
2004 Microchip Technology Inc.
PIC16F818/819
An example of the complete four-word write sequence is shown in Example 3-5. The initial address is loaded into the EEADRH:EEADR register pair; the four words of data are loaded using indirect addressing, assuming that a row erase sequence has already been performed.
EXAMPLE 3-5:
WRITING TO FLASH PROGRAM MEMORY
; This write routine assumes the following: ; ; ; ; ; ; 1. 2. 3. 4. 5. 6. The 32 words in the erase block have already been erased. A valid starting address (the least significant bits = '00') is loaded into EEADRH:EEADR This example is starting at 0x100, this is an application dependent setting. The 8 bytes (4 words) of data are loaded, starting at an address in RAM called ARRAY. This is an example only, location of data to program is application dependent. word_block is located in data memory. BANKSEL BSF BSF BCF EECON1 EECON1, EEPGD EECON1, WREN EECON1, FREE ;prepare for WRITE procedure ;point to program memory ;allow write cycles ;perform write only
BANKSEL word_block MOVLW .4 MOVWF word_block BANKSEL MOVLW MOVWF MOVLW MOVWF BANKSEL MOVLW MOVWF LOOP BANKSEL MOVF MOVWF INCF MOVF MOVWF INCF BANKSEL MOVLW MOVWF MOVLW MOVWF BSF NOP NOP BANKSEL INCF BANKSEL DECFSZ GOTO EEDATA INDF, W EEDATA FSR, F INDF, W EEDATH FSR, F EECON1 0x55 EECON2 0xAA EECON2 EECON1, WR EEADRH 0x01 EEADRH 0x00 EEADR ARRAY ARRAY FSR
;prepare for 4 words to be written ;Start writing at 0x100 ;load HIGH address ;load LOW address ;initialize FSR to start of data
;indirectly load EEDATA ;increment data pointer ;indirectly load EEDATH ;increment data pointer
;required sequence
Required Sequence
;set WR bit to begin write ;instructions here are ignored as processor
EEADR EEADR, f word_block word_block, f loop
;load next word address ;have 4 words been written? ;NO, continue with writing
BANKSEL EECON1 BCF EECON1, WREN BSF INTCON, GIE
;YES, 4 words complete, disable writes ;enable interrupts
2004 Microchip Technology Inc.
DS39598E-page 31
PIC16F818/819
3.8 Protection Against Spurious Write 3.9 Operation During Code-Protect
There are conditions when the device should not write to the data EEPROM memory. To protect against spurious EEPROM writes, various mechanisms have been built-in. On power-up, WREN is cleared. Also, the Power-up Timer (72 ms duration) prevents an EEPROM write. The write initiate sequence and the WREN bit together help prevent an accidental write during brown-out, power glitch or software malfunction. When the data EEPROM is code-protected, the microcontroller can read and write to the EEPROM normally. However, all external access to the EEPROM is disabled. External write access to the program memory is also disabled. When program memory is code-protected, the microcontroller can read and write to program memory normally as well as execute instructions. Writes by the device may be selectively inhibited to regions of the memory depending on the setting of bits, WRT1:WRT0, of the Configuration Word (see Section 12.1 "Configuration Bits" for additional information). External access to the memory is also disabled.
TABLE 3-1:
REGISTERS/BITS ASSOCIATED WITH DATA EEPROM AND FLASH PROGRAM MEMORIES
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Value on Power-on Reset Value on all other Resets
Address 10Ch 10Dh 10Eh 10Fh 18Ch 18Dh 0Dh 8Dh Legend:
Name
EEDATA EEPROM/Flash Data Register Low Byte EEADR EEDATH EEADRH EEPROM/Flash Address Register Low Byte -- -- -- -- -- -- -- EEPROM/Flash Data Register High Byte -- -- -- -- -- FREE EEIF EEIE -- WRERR -- -- EEPROM/Flash Address Register High Byte WREN -- -- WR -- -- RD -- --
xxxx xxxx uuuu uuuu xxxx xxxx uuuu uuuu --xx xxxx --uu uuuu ---- -xxx ---- -uuu x--x x000 x--x q000 ---- ---- ---- ------0 ---- ---0 ------0 ---- ---0 ----
EECON1 EEPGD PIR2 PIE2 -- --
EECON2 EEPROM Control Register 2 (not a physical register)
x = unknown, u = unchanged, - = unimplemented, read as `0', q = value depends upon condition. Shaded cells are not used by data EEPROM or Flash program memory.
DS39598E-page 32
2004 Microchip Technology Inc.
PIC16F818/819
4.0
4.1
OSCILLATOR CONFIGURATIONS
Oscillator Types
TABLE 4-1:
CAPACITOR SELECTION FOR CRYSTAL OSCILLATOR (FOR DESIGN GUIDANCE ONLY)
Crystal Freq 32 kHz 200 kHz 200 kHz 1 MHz 4 MHz Typical Capacitor Values Tested: C1 C2 33 pF 15 pF 56 pF 15 pF 15 pF 15 pF 15 pF 15 pF
The PIC16F818/819 can be operated in eight different oscillator modes. The user can program three configuration bits (FOSC2:FOSC0) to select one of these eight modes (modes 5-8 are new PIC16 oscillator configurations): 1. 2. 3. 4. 5. 6. 7. 8. LP XT HS RC RCIO INTIO1 INTIO2 ECIO Low-Power Crystal Crystal/Resonator High-Speed Crystal/Resonator External Resistor/Capacitor with FOSC/4 output on RA6 External Resistor/Capacitor with I/O on RA6 Internal Oscillator with FOSC/4 output on RA6 and I/O on RA7 Internal Oscillator with I/O on RA6 and RA7 External Clock with I/O on RA6
Osc Type
LP XT
33 pF 15 pF 56 pF 15 pF 15 pF 15 pF 15 pF 15 pF
HS
4 MHz 8 MHz 20 MHz
Capacitor values are for design guidance only. These capacitors were tested with the crystals listed below for basic start-up and operation. These values were not optimized. Different capacitor values may be required to produce acceptable oscillator operation. The user should test the performance of the oscillator over the expected VDD and temperature range for the application. See the notes following this table for additional information. Note 1: Higher capacitance increases the stability of the oscillator but also increases the start-up time. 2: Since each crystal has its own characteristics, the user should consult the crystal manufacturer for appropriate values of external components. 3: RS may be required in HS mode, as well as XT mode, to avoid overdriving crystals with low drive level specification. 4: Always verify oscillator performance over the VDD and temperature range that is expected for the application.
4.2
Crystal Oscillator/Ceramic Resonators
In XT, LP or HS modes, a crystal or ceramic resonator is connected to the OSC1/CLKI and OSC2/CLKO pins to establish oscillation (see Figure 4-1 and Figure 4-2). The PIC16F818/819 oscillator design requires the use of a parallel cut crystal. Use of a series cut crystal may give a frequency out of the crystal manufacturer's specifications.
FIGURE 4-1:
CRYSTAL OPERATION (HS, XT OR LP OSC CONFIGURATION)
OSC1
PIC16F818/819
C1
(1)
XTAL OSC2 RS(2) C2(1)
RF(3)
Sleep
To Internal Logic
Note 1: See Table 4-1 for typical values of C1 and C2. 2: A series resistor (RS) may be required for AT strip cut crystals. 3: RF varies with the crystal chosen (typically between 2 M to 10 M).
2004 Microchip Technology Inc.
DS39598E-page 33
PIC16F818/819
FIGURE 4-2: CERAMIC RESONATOR OPERATION (HS OR XT OSC CONFIGURATION)
OSC1 C1
(1)
4.3
External Clock Input
PIC16F818/819
The ECIO Oscillator mode requires an external clock source to be connected to the OSC1 pin. There is no oscillator start-up time required after a Power-on Reset or after an exit from Sleep mode. In the ECIO Oscillator mode, the OSC2 pin becomes an additional general purpose I/O pin. The I/O pin becomes bit 6 of PORTA (RA6). Figure 4-3 shows the pin connections for the ECIO Oscillator mode.
RES OSC2 RS(2) C2(1)
RF(3)
Sleep
To Internal Logic
FIGURE 4-3:
Note 1: See Table 4-2 for typical values of C1 and C2. 2: A series resistor (RS) may be required. 3: RF varies with the resonator chosen (typically between 2 M to 10 M). Clock from Ext. System RA6
EXTERNAL CLOCK INPUT OPERATION (ECIO CONFIGURATION)
OSC1/CLKI PIC16F818/819 I/O (OSC2)
TABLE 4-2:
CERAMIC RESONATORS (FOR DESIGN GUIDANCE ONLY)
Typical Capacitor Values Used: Mode XT Freq 455 kHz 2.0 MHz 4.0 MHz 8.0 MHz 16.0 MHz OSC1 56 pF 47 pF 33 pF 27 pF 22 pF OSC2 56 pF 47 pF 33 pF 27 pF 22 pF
HS
Capacitor values are for design guidance only. These capacitors were tested with the resonators listed below for basic start-up and operation. These values were not optimized. Different capacitor values may be required to produce acceptable oscillator operation. The user should test the performance of the oscillator over the expected VDD and temperature range for the application. See the notes following this table for additional information. Note: When using resonators with frequencies above 3.5 MHz, the use of HS mode rather than XT mode is recommended. HS mode may be used at any VDD for which the controller is rated. If HS is selected, it is possible that the gain of the oscillator will overdrive the resonator. Therefore, a series resistor should be placed between the OSC2 pin and the resonator. As a good starting point, the recommended value of RS is 330.
DS39598E-page 34
2004 Microchip Technology Inc.
PIC16F818/819
4.4 RC Oscillator 4.5 Internal Oscillator Block
For timing insensitive applications, the "RC" and "RCIO" device options offer additional cost savings. The RC oscillator frequency is a function of the supply voltage, the resistor (REXT) and capacitor (CEXT) values and the operating temperature. In addition to this, the oscillator frequency will vary from unit to unit due to normal manufacturing variation. Furthermore, the difference in lead frame capacitance between package types will also affect the oscillation frequency, especially for low CEXT values. The user also needs to take into account variation due to tolerance of external R and C components used. Figure 4-4 shows how the R/C combination is connected. In the RC Oscillator mode, the oscillator frequency divided by 4 is available on the OSC2 pin. This signal may be used for test purposes or to synchronize other logic. The PIC16F818/819 devices include an internal oscillator block which generates two different clock signals; either can be used as the system's clock source. This can eliminate the need for external oscillator circuits on the OSC1 and/or OSC2 pins. The main output (INTOSC) is an 8 MHz clock source which can be used to directly drive the system clock. It also drives the INTOSC postscaler which can provide a range of clock frequencies from 125 kHz to 4 MHz. The other clock source is the internal RC oscillator (INTRC) which provides a 31.25 kHz (32 s nominal period) output. The INTRC oscillator is enabled by selecting the INTRC as the system clock source or when any of the following are enabled: * Power-up Timer * Watchdog Timer These features are discussed in greater detail in Section 12.0 "Special Features of the CPU". The clock source frequency (INTOSC direct, INTRC direct or INTOSC postscaler) is selected by configuring the IRCF bits of the OSCCON register (Register 4-2). Note:
PIC16F818/819 FOSC/4 OSC2/CLKO
FIGURE 4-4:
VDD REXT
RC OSCILLATOR MODE
OSC1 CEXT VSS
Internal Clock
Recommended values: 3 k REXT 100 k CEXT > 20 pF
The RCIO Oscillator mode (Figure 4-5) functions like the RC mode except that the OSC2 pin becomes an additional general purpose I/O pin. The I/O pin becomes bit 6 of PORTA (RA6).
Throughout this data sheet, when referring specifically to a generic clock source, the term "INTRC" may also be used to refer to the clock modes using the internal oscillator block. This is regardless of whether the actual frequency used is INTOSC (8 MHz), the INTOSC postscaler or INTRC (31.25 kHz).
4.5.1
INTRC MODES
FIGURE 4-5:
VDD REXT
RCIO OSCILLATOR MODE
Using the internal oscillator as the clock source can eliminate the need for up to two external oscillator pins, which can then be used for digital I/O. Two distinct configurations are available: * In INTIO1 mode, the OSC2 pin outputs FOSC/4 while OSC1 functions as RA7 for digital input and output. * In INTIO2 mode, OSC1 functions as RA7 and OSC2 functions as RA6, both for digital input and output.
OSC1 CEXT VSS RA6 I/O (OSC2)
Internal Clock
PIC16F818/819
Recommended values: 3 k REXT 100 k CEXT > 20 pF
2004 Microchip Technology Inc.
DS39598E-page 35
PIC16F818/819
4.5.2 OSCTUNE REGISTER
The internal oscillator's output has been calibrated at the factory but can be adjusted in the application. This is done by writing to the OSCTUNE register (Register 4-1). The tuning sensitivity is constant throughout the tuning range. The OSCTUNE register has a tuning range of 12.5%. When the OSCTUNE register is modified, the INTOSC and INTRC frequencies will begin shifting to the new frequency. The INTRC clock will reach the new frequency within 8 clock cycles (approximately 8 * 32 s = 256 s); the INTOSC clock will stabilize within 1 ms. Code execution continues during this shift. There is no indication that the shift has occurred. Operation of features that depend on the 31.25 kHz INTRC clock source frequency, such as the WDT, Fail-Safe Clock Monitor and peripherals, will also be affected by the change in frequency.
REGISTER 4-1:
OSCTUNE: OSCILLATOR TUNING REGISTER (ADDRESS 90h)
U-0 -- bit 7 U-0 -- R/W-0 TUN5 R/W-0 TUN4 R/W-0 TUN3 R/W-0 TUN2 R/W-0 TUN1 R/W-0 TUN0 bit 0
bit 7-6 bit 5-0
Unimplemented: Read as `0' TUN<5:0>: Frequency Tuning bits 011111 = Maximum frequency 011110 = * * * 000001 = 000000 = Center frequency. Oscillator module is running at the calibrated frequency. 111111 = * * * 100000 = Minimum frequency Legend: R = Readable bit -n = Value at POR
W = Writable bit `1' = Bit is set
U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown
DS39598E-page 36
2004 Microchip Technology Inc.
PIC16F818/819
4.5.3 OSCILLATOR CONTROL REGISTER 4.5.5
The OSCCON register (Register 4-2) controls several aspects of the system clock's operation. The Internal Oscillator Select bits, IRCF2:IRCF0, select the frequency output of the internal oscillator block that is used to drive the system clock. The choices are the INTRC source (31.25 kHz), the INTOSC source (8 MHz) or one of the six frequencies derived from the INTOSC postscaler (125 kHz to 4 MHz). Changing the configuration of these bits has an immediate change on the multiplexor's frequency output.
CLOCK TRANSITION SEQUENCE WHEN THE IRCF BITS ARE MODIFIED
Following are three different sequences for switching the internal RC oscillator frequency. * Clock before switch: 31.25 kHz (IRCF<2:0> = 000) 1. IRCF bits are modified to an INTOSC/INTOSC postscaler frequency. 2. The clock switching circuitry waits for a falling edge of the current clock, at which point CLKO is held low. 3. The clock switching circuitry then waits for eight falling edges of requested clock, after which it switches CLKO to this new clock source. 4. The IOFS bit is clear to indicate that the clock is unstable and a 4 ms (approx.) delay is started. Time dependent code should wait for IOFS to become set. 5. Switchover is complete. * Clock before switch: One of INTOSC/INTOSC postscaler (IRCF<2:0> 000) 1. IRCF bits are modified to INTRC (IRCF<2:0> = 000). 2. The clock switching circuitry waits for a falling edge of the current clock, at which point CLKO is held low. 3. The clock switching circuitry then waits for eight falling edges of requested clock, after which it switches CLKO to this new clock source. 4. Oscillator switchover is complete. * Clock before switch: One of INTOSC/INTOSC postscaler (IRCF<2:0> 000) 1. IRCF bits are modified to a different INTOSC/ INTOSC postscaler frequency. 2. The clock switching circuitry waits for a falling edge of the current clock, at which point CLKO is held low. 3. The clock switching circuitry then waits for eight falling edges of requested clock, after which it switches CLKO to this new clock source. 4. The IOFS bit is set. 5. Oscillator switchover is complete.
4.5.4
MODIFYING THE IRCF BITS
The IRCF bits can be modified at any time regardless of which clock source is currently being used as the system clock. The internal oscillator allows users to change the frequency during run time. This is achieved by modifying the IRCF bits in the OSCCON register. The sequence of events that occur after the IRCF bits are modified is dependent upon the initial value of the IRCF bits before they are modified. If the INTRC (31.25 kHz, IRCF<2:0> = 000) is running and the IRCF bits are modified to any other value than `000', a 4 ms (approx.) clock switch delay is turned on. Code execution continues at a higher than expected frequency while the new frequency stabilizes. Time sensitive code should wait for the IOFS bit in the OSCCON register to become set before continuing. This bit can be monitored to ensure that the frequency is stable before using the system clock in time critical applications. If the IRCF bits are modified while the internal oscillator is running at any other frequency than INTRC (31.25 kHz, IRCF<2:0> 000), there is no need for a 4 ms (approx.) clock switch delay. The new INTOSC frequency will be stable immediately after the eight falling edges. The IOFS bit will remain set after clock switching occurs. Note: Caution must be taken when modifying the IRCF bits using BCF or BSF instructions. It is possible to modify the IRCF bits to a frequency that may be out of the VDD specification range; for example, VDD = 2.0V and IRCF = 111 (8 MHz).
2004 Microchip Technology Inc.
DS39598E-page 37
PIC16F818/819
FIGURE 4-6: PIC16F818/819 CLOCK DIAGRAM
PIC18F818/819
CONFIG (FOSC2:FOSC0) OSC2 Sleep LP, XT, HS, RC, EC OSC1 MUX Peripherals
OSCCON<6:4> 8 MHz 4 MHz Internal Oscillator Block 8 MHz (INTOSC) 2 MHz 101 Postscaler 100 500 kHz 250 kHz 125 kHz 31.25 kHz 011 010 001 000 MUX 1 MHz 111 110
Internal Oscillator
CPU
31.25 kHz Source
31.25 kHz (INTRC)
WDT
REGISTER 4-2:
OSCCON: OSCILLATOR CONTROL REGISTER (ADDRESS 8Fh)
U-0 -- bit 7 R/W-0 IRCF2 R/W-0 IRCF1 R/W-0 IRCF0 U-0 -- R-0 IOFS U-0 -- U-0 -- bit 0
bit 7 bit 6-4
Unimplemented: Read as `0' IRCF2:IRCF0: Internal Oscillator Frequency Select bits 111 = 8 MHz (8 MHz source drives clock directly) 110 = 4 MHz 101 = 2 MHz 100 = 1 MHz 011 = 500 kHz 010 = 250 kHz 001 = 125 kHz 000 = 31.25 kHz (INTRC source drives clock directly) Unimplemented: Read as `0' IOFS: INTOSC Frequency Stable bit 1 = Frequency is stable 0 = Frequency is not stable Unimplemented: Read as `0' Legend: R = Readable bit -n = Value at POR W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown
bit 3 bit 2
bit 1-0
DS39598E-page 38
2004 Microchip Technology Inc.
PIC16F818/819
5.0 I/O PORTS
Some pins for these I/O ports are multiplexed with an alternate function for the peripheral features on the device. In general, when a peripheral is enabled, that pin may not be used as a general purpose I/O pin. Additional information on I/O ports may be found in the "PICmicro(R) Mid-Range MCU Family Reference Manual" (DS33023). Pin RA4 is multiplexed with the Timer0 module clock input and with an analog input to become the RA4/AN4/ T0CKI pin. The RA4/AN4/T0CKI pin is a Schmitt Trigger input and full CMOS output driver. Pin RA5 is multiplexed with the Master Clear module input. The RA5/MCLR/VPP pin is a Schmitt Trigger input. Pin RA6 is multiplexed with the oscillator module input and external oscillator output. Pin RA7 is multiplexed with the oscillator module input and external oscillator input. Pin RA6/OSC2/CLKO and pin RA7/OSC1/CLKI are Schmitt Trigger inputs and full CMOS output drivers. Pins RA<1:0> are multiplexed with analog inputs. Pins RA<3:2> are multiplexed with analog inputs and VREF inputs. Pins RA<3:0> have TTL inputs and full CMOS output drivers.
5.1
PORTA and the TRISA Register
PORTA is an 8-bit wide, bidirectional port. The corresponding data direction register is TRISA. Setting a TRISA bit (= 1) will make the corresponding PORTA pin an input (i.e., put the corresponding output driver in a high-impedance mode). Clearing a TRISA bit (= 0) will make the corresponding PORTA pin an output (i.e., put the contents of the output latch on the selected pin). Note: On a Power-on Reset, the pins PORTA<4:0> are configured as analog inputs and read as `0'.
EXAMPLE 5-1:
BANKSEL PORTA CLRF PORTA
INITIALIZING PORTA
; ; ; ; ; ; ; ; ; ; ; select bank of PORTA Initialize PORTA by clearing output data latches Select Bank of ADCON1 Configure all pins as digital inputs Value used to initialize data direction Set RA<7:0> as inputs
Reading the PORTA register reads the status of the pins, whereas writing to it will write to the port latch. All write operations are read-modify-write operations. Therefore, a write to a port implies that the port pins are read, this value is modified and then written to the port data latch.
BANKSEL MOVLW MOVWF MOVLW
ADCON1 0x06 ADCON1 0xFF
MOVWF
TRISA
TABLE 5-1:
Name RA0/AN0 RA1/AN1 RA2/AN2/VREFRA3/AN3/VREF+ RA4/AN4/T0CKI RA5/MCLR/VPP
PORTA FUNCTIONS
Bit# bit 0 bit 1 bit 2 bit 3 bit 4 bit 5 bit 6 bit 7 Buffer TTL TTL TTL TTL ST ST ST Input/output or analog input. Input/output or analog input. Input/output, analog input or VREF-. Input/output, analog input or VREF+. Input/output, analog input or external clock input for Timer0. Input, Master Clear (Reset) or programming voltage input. Input/output, connects to crystal or resonator, oscillator output or 1/4 the frequency of OSC1 and denotes the instruction cycle in RC mode. Function
RA6/OSC2/CLKO RA7/OSC1/CLKI
ST/CMOS(1) Input/output, connects to crystal or resonator or oscillator input.
Legend: TTL = TTL input, ST = Schmitt Trigger input Note 1: This buffer is a Schmitt Trigger input when configured in RC Oscillator mode and a CMOS input otherwise.
TABLE 5-2:
Address 05h 85h 9Fh Legend: Note 1:
SUMMARY OF REGISTERS ASSOCIATED WITH PORTA
Bit 7 RA7 ADFM Bit 6 RA6 ADCS2 Bit 5 RA5 -- Bit 4 RA4 -- Bit 3 RA3 Bit 2 RA2 Bit 1 RA1 Bit 0 RA0 PCFG0 Value on POR, BOR xxx0 0000 1111 1111 00-- 0000 Value on all other Resets uuu0 0000 1111 1111 00-- 0000
Name PORTA TRISA ADCON1
TRISA7 TRISA6 TRISA5(1) PORTA Data Direction Register PCFG3 PCFG2 PCFG1
x = unknown, u = unchanged, - = unimplemented locations read as `0'. Shaded cells are not used by PORTA. Pin 5 is an input only; the state of the TRISA5 bit has no effect and will always read `1'.
2004 Microchip Technology Inc.
DS39598E-page 39
PIC16F818/819
FIGURE 5-1: BLOCK DIAGRAM OF RA0/AN0:RA1/AN1 PINS FIGURE 5-3:
Data Bus D CK D WR TRISA CK Q Q Q N Q Analog Input Mode TRIS Latch VSS VSS I/O pin VDD VDD P WR PORTA
BLOCK DIAGRAM OF RA2/AN2/VREF- PIN
Q VDD VDD P
Data Bus WR PORTA
D
CK Q Data Latch D Q
Data Latch
WR TRISA
N CK Q Analog Input Mode TTL Input Buffer TRIS Latch VSS VSS
I/O pin
RD TRISA Q
TTL Input Buffer D
RD TRISA Q
D EN
EN RD PORTA RD PORTA To A/D Module VREF- Input To A/D Module Channel Input To A/D Module Channel Input
FIGURE 5-2:
Data Bus WR PORTA
BLOCK DIAGRAM OF RA3/AN3/VREF+ PIN
Q
FIGURE 5-4:
Data Bus
BLOCK DIAGRAM OF RA4/AN4/T0CKI PIN
Q
D CK D
D CK D
Q Q
VDD VDD P
WR PORTA
Q Q
Data Latch I/O pin
Data Latch
VDD VDD P
WR TRISA
N CK Q Analog Input Mode TTL Input Buffer RD TRISA Q EN D TRIS Latch VSS VSS
WR TRISA
N CK Q Analog Input Mode Schmitt Trigger Input Buffer TRIS Latch VSS VSS
I/O pin
RD TRISA
Q EN RD PORTA
D
RD PORTA
To A/D Module VREF+ Input To A/D Module Channel Input
TMR0 Clock Input To A/D Module Channel Input
DS39598E-page 40
2004 Microchip Technology Inc.
PIC16F818/819
FIGURE 5-5: BLOCK DIAGRAM OF RA5/MCLR/VPP PIN
MCLRE MCLR Circuit MCLR Filter Schmitt Trigger Buffer
Data Bus RD TRIS VSS Q EN RD Port MCLRE D Schmitt Trigger Input Buffer VSS RA5/MCLR/VPP
FIGURE 5-6:
BLOCK DIAGRAM OF RA6/OSC2/CLKO PIN
From OSC1 CLKO (FOSC/4) VDD P RA6/OSC2/CLKO (FOSC = 1x1) N VSS Oscillator Circuit VDD
Data Bus WR PORTA
D CK
Q Q
VSS
VDD
P
Data Latch D WR TRISA CK Q
N
Q
(FOSC = 1x0,011) VSS
TRIS Latch
RD TRISA Q EN RD PORTA D
Schmitt Trigger Input Buffer
(FOSC = 1x0,011)
Note 1: I/O pins have protection diodes to VDD and VSS. 2: CLKO signal is 1/4 of the FOSC frequency.
2004 Microchip Technology Inc.
DS39598E-page 41
PIC16F818/819
FIGURE 5-7: BLOCK DIAGRAM OF RA7/OSC1/CLKI PIN
From OSC2 Oscillator Circuit VDD (FOSC = 011) Data Bus WR PORTA D CK D WR TRISA CK Q Q RA7/OSC1/CLKI VSS
VDD P
Data Latch Q N Q FOSC = 10x VSS TRIS Latch
RD TRISA Q EN RD PORTA D
Schmitt Trigger Input Buffer
FOSC = 10x
Note 1: I/O pins have protection diodes to VDD and VSS.
DS39598E-page 42
2004 Microchip Technology Inc.
PIC16F818/819
5.2 PORTB and the TRISB Register
PORTB is an 8-bit wide, bidirectional port. The corresponding data direction register is TRISB. Setting a TRISB bit (= 1) will make the corresponding PORTB pin an input (i.e., put the corresponding output driver in a high-impedance mode). Clearing a TRISB bit (= 0) will make the corresponding PORTB pin an output (i.e., put the contents of the output latch on the selected pin). Each of the PORTB pins has a weak internal pull-up. A single control bit can turn on all the pull-ups. This is performed by clearing bit RBPU (OPTION_REG<7>). The weak pull-up is automatically turned off when the port pin is configured as an output. The pull-ups are disabled on a Power-on Reset. Four of PORTB's pins, RB7:RB4, have an interrupt-onchange feature. Only pins configured as inputs can cause this interrupt to occur (i.e., any RB7:RB4 pin configured as an output is excluded from the interrupton-change comparison). The input pins (of RB7:RB4) are compared with the old value latched on the last read of PORTB. The "mismatch" outputs of RB7:RB4 are ORed together to generate the RB Port Change Interrupt with Flag bit, RBIF (INTCON<0>). This interrupt can wake the device from Sleep. The user, in the Interrupt Service Routine, can clear the interrupt in the following manner: a) b) Any read or write of PORTB. This will end the mismatch condition. Clear flag bit RBIF. A mismatch condition will continue to set flag bit RBIF. Reading PORTB will end the mismatch condition and allow flag bit RBIF to be cleared. The interrupt-on-change feature is recommended for wake-up on key depression operation and operations where PORTB is only used for the interrupt-on-change feature. Polling of PORTB is not recommended while using the interrupt-on-change feature. RB0/INT is an external interrupt input pin and is configured using the INTEDG bit (OPTION_REG<6>). PORTB is multiplexed with several peripheral functions (see Table 5-3). PORTB pins have Schmitt Trigger input buffers. When enabling peripheral functions, care should be taken in defining TRIS bits for each PORTB pin. Some peripherals override the TRIS bit to make a pin an output, while other peripherals override the TRIS bit to make a pin an input. Since the TRIS bit override is in effect while the peripheral is enabled, read-modifywrite instructions (BSF, BCF, XORWF) with TRISB as the destination should be avoided. The user should refer to the corresponding peripheral section for the correct TRIS bit settings.
2004 Microchip Technology Inc.
DS39598E-page 43
PIC16F818/819
TABLE 5-3:
Name RB0/INT RB1/SDI/SDA RB2/SDO/CCP1
PORTB FUNCTIONS
Bit# bit 0 bit 1 bit 2 Buffer TTL/ST
(1)
Function Input/output pin or external interrupt input. Internal software programmable weak pull-up.
TTL/ST(5) Input/output pin, SPITM data input pin or I2CTM data I/O pin. Internal software programmable weak pull-up. TTL/ST(4) Input/output pin, SPI data output pin or Capture input/Compare output/PWM output pin. Internal software programmable weak pull-up. TTL/ST(2) Input/output pin, Capture input/Compare output/PWM output pin or programming in LVP mode. Internal software programmable weak pull-up. TTL/ST(5) Input/output pin or SPI and I2C clock pin (with interrupt-on-change). Internal software programmable weak pull-up. TTL Input/output pin or SPI slave select pin (with interrupt-on-change). Internal software programmable weak pull-up.
RB3/CCP1/PGM(3)
bit 3
RB4/SCK/SCL RB5/SS RB6/T1OSO/T1CKI/ PGC RB7/T1OSI/PGD
bit 4 bit 5 bit 6
TTL/ST(2) Input/output pin, Timer1 oscillator output pin, Timer1 clock input pin or serial programming clock (with interrupt-on-change). Internal software programmable weak pull-up. TTL/ST(2) Input/output pin, Timer1 oscillator input pin or serial programming data (with interrupt-on-change). Internal software programmable weak pull-up.
bit 7
Legend: Note 1: 2: 3:
4: 5:
TTL = TTL input, ST = Schmitt Trigger input This buffer is a Schmitt Trigger input when configured as the external interrupt. This buffer is a Schmitt Trigger input when used in Serial Programming mode. Low-Voltage ICSPTM Programming (LVP) is enabled by default which disables the RB3 I/O function. LVP must be disabled to enable RB3 as an I/O pin and allow maximum compatibility to the other 18-pin mid-range devices. This buffer is a Schmitt Trigger input when configured for CCP or SSP mode. This buffer is a Schmitt Trigger input when configured for SPI or I2C mode.
TABLE 5-4:
Address
SUMMARY OF REGISTERS ASSOCIATED WITH PORTB
Name Bit 7 RB7 Bit 6 RB6 INTEDG Bit 5 RB5 T0CS Bit 4 RB4 T0SE Bit 3 RB3 PSA Bit 2 RB2 PS2 Bit 1 RB1 PS1 Bit 0 Value on POR, BOR Value on all other Resets
06h, 106h PORTB 86h, 186h TRISB
RB0 xxxx xxxx uuuu uuuu 1111 1111 1111 1111 PS0 1111 1111 1111 1111
PORTB Data Direction Register
81h, 181h OPTION_REG RBPU
Legend: x = unknown, u = unchanged. Shaded cells are not used by PORTB.
DS39598E-page 44
2004 Microchip Technology Inc.
PIC16F818/819
FIGURE 5-8: BLOCK DIAGRAM OF RB0 PIN
RBPU(2) Data Bus WR PORTB Data Latch D Q CK TRIS Latch D Q CK TTL Input Buffer I/O pin(1) VDD Weak P Pull-up
WR TRISB
RD TRISB
Q RD PORTB
D EN
To INT0 or CCP RD PORTB Note 1: I/O pins have diode protection to VDD and VSS. 2: To enable weak pull-ups, set the appropriate TRIS bit(s) and clear the RBPU bit.
2004 Microchip Technology Inc.
DS39598E-page 45
PIC16F818/819
FIGURE 5-9: BLOCK DIAGRAM OF RB1 PIN
I2CTM Mode Port/SSPEN Select SDA Output 1 0 RBPU(2) VDD P VDD Weak P Pull-up Data Latch D CK N I/O pin(1) Q
Data Bus WR PORTB
VSS TRIS Latch D Q CK Q
WR TRISB
RD TRISB SDA Drive Q RD PORTB
TTL Input Buffer D EN
SDA(3)
Schmitt Trigger Buffer
RD PORTB
SDI
Note 1: I/O pins have diode protection to VDD and VSS. 2: To enable weak pull-ups, set the appropriate TRIS bit(s) and clear the RBPU bit. 3: The SDA Schmitt Trigger conforms to the I2C specification.
DS39598E-page 46
2004 Microchip Technology Inc.
PIC16F818/819
FIGURE 5-10: BLOCK DIAGRAM OF RB2 PIN
CCPMX Module Select SDO CCP 0 0 1 1
RBPU(2) Data Bus WR PORTB Data Latch D Q CK TRIS Latch D Q CK
VDD Weak P Pull-up
I/O pin(1)
WR TRISB
TTL Input Buffer
RD TRISB
Q RD PORTB
D EN
RD PORTB
Note 1: I/O pins have diode protection to VDD and VSS. 2: To enable weak pull-ups, set the appropriate TRIS bit(s) and clear the RBPU bit.
2004 Microchip Technology Inc.
DS39598E-page 47
PIC16F818/819
FIGURE 5-11: BLOCK DIAGRAM OF RB3 PIN
CCP1 = 1000, 1001, 11xx and CCPMX = 0 CCP1 = 0100, 0101, 0110, 0111 and CCPMX = 0 0 or LVP = 1
CCP
1
VDD RBPU(2) Data Bus WR PORTB Data Latch D Q CK TRIS Latch D Q WR TRISB CK TTL Input Buffer Weak P Pull-up
I/O pin(1)
RD TRISB
Q RD PORTB
D EN
To PGM or CCP RD PORTB
Note 1: I/O pins have diode protection to VDD and VSS. 2: To enable weak pull-ups, set the appropriate TRIS bit(s) and clear the RBPU bit.
DS39598E-page 48
2004 Microchip Technology Inc.
PIC16F818/819
FIGURE 5-12: BLOCK DIAGRAM OF RB4 PIN
Port/SSPEN SCK/SCL 1 0 RBPU(2) VDD Weak P Pull-up
VDD SCL Drive Data Bus WR PORTB Data Latch D CK TRIS Latch D Q CK TTL Input Buffer Latch Q D Set RBIF RD PORTB EN Q1 Q N I/O pin(1) P
VSS
WR TRISB
RD TRISB
From other RB7:RB4 pins
Q
D RD PORTB EN Q3
SCK SCL(3)
Note 1: I/O pins have diode protection to VDD and VSS. 2: To enable weak pull-ups, set the appropriate TRIS bit(s) and clear the RBPU bit. 3: The SCL Schmitt Trigger conforms to the I2CTM specification.
2004 Microchip Technology Inc.
DS39598E-page 49
PIC16F818/819
FIGURE 5-13: BLOCK DIAGRAM OF RB5 PIN
RBPU(2) Port/SSPEN Data Bus WR PORTB Data Latch D Q CK TRIS Latch D Q CK TTL Input Buffer Latch Q D Set RBIF RD PORTB EN Q1 I/O pin(1) VDD Weak P Pull-up
WR TRISB
RD TRISB
From other RB7:RB4 pins
Q
D RD PORTB EN Q3
SS
Note 1: I/O pins have diode protection to VDD and VSS. 2: To enable weak pull-ups, set the appropriate TRIS bit(s) and clear the RBPU bit.
DS39598E-page 50
2004 Microchip Technology Inc.
PIC16F818/819
FIGURE 5-14: BLOCK DIAGRAM OF RB6 PIN
RBPU(2) Data Bus WR PORTB Data Latch D Q CK TRIS Latch D Q CK T1OSCEN I/O pin(1) VDD Weak P Pull-up
WR TRISB
RD TRISB T1OSCEN/ICD/ Program Mode
TTL Input Buffer Latch Q D
Set RBIF
RD PORTB
EN
Q1
From other RB7:RB4 pins
Q
D RD PORTB EN Q3
T1CKI/PGC From T1OSO Output
Note 1: I/O pins have diode protection to VDD and VSS. 2: To enable weak pull-ups, set the appropriate TRIS bit(s) and clear the RBPU bit.
2004 Microchip Technology Inc.
DS39598E-page 51
PIC16F818/819
FIGURE 5-15: BLOCK DIAGRAM OF RB7 PIN
Port/Program Mode/ICD PGD 1 0 RBPU(2) Data Latch D Q CK TRIS Latch D Q WR TRISB CK I/O pin(1) VDD Weak P Pull-up
Data Bus WR PORTB
0 1
RD TRISB T1OSCEN PGD DRVEN
T1OSCEN Analog Input Mode TTL Input Buffer Latch Q D
Set RBIF
RD PORTB
EN
Q1
From other RB7:RB4 pins
Q
D RD PORTB EN Q3
PGD To T1OSI Input
Note 1: I/O pins have diode protection to VDD and VSS. 2: To enable weak pull-ups, set the appropriate TRIS bit(s) and clear the RBPU bit.
DS39598E-page 52
2004 Microchip Technology Inc.
PIC16F818/819
6.0 TIMER0 MODULE
The Timer0 module timer/counter has the following features: * * * * * * 8-bit timer/counter Readable and writable 8-bit software programmable prescaler Internal or external clock select Interrupt-on-overflow from FFh to 00h Edge select for external clock Counter mode is selected by setting bit T0CS (OPTION_REG<5>). In Counter mode, Timer0 will increment either on every rising or falling edge of pin RA4/AN4/T0CKI. The incrementing edge is determined by the Timer0 Source Edge Select bit, T0SE (OPTION_REG<4>). Clearing bit T0SE selects the rising edge. Restrictions on the external clock input are discussed in detail in Section 6.3 "Using Timer0 with an External Clock". The prescaler is mutually exclusively shared between the Timer0 module and the Watchdog Timer. The prescaler is not readable or writable. Section 6.4 "Prescaler" details the operation of the prescaler.
Additional information on the Timer0 module is available in the "PICmicro(R) Mid-Range MCU Family Reference Manual" (DS33023). Figure 6-1 is a block diagram of the Timer0 module and the prescaler shared with the WDT.
6.2
Timer0 Interrupt
6.1
Timer0 Operation
Timer0 operation is controlled through the OPTION_REG register (see Register 2-2). Timer mode is selected by clearing bit T0CS (OPTION_REG<5>). In Timer mode, the Timer0 module will increment every instruction cycle (without prescaler). If the TMR0 register is written, the increment is inhibited for the following two instruction cycles. The user can work around this by writing an adjusted value to the TMR0 register.
The TMR0 interrupt is generated when the TMR0 register overflows from FFh to 00h. This overflow sets bit, TMR0IF (INTCON<2>). The interrupt can be masked by clearing bit, TMR0IE (INTCON<5>). Bit TMR0IF must be cleared in software by the Timer0 module Interrupt Service Routine before re-enabling this interrupt. The TMR0 interrupt cannot awaken the processor from Sleep since the timer is shut-off during Sleep.
FIGURE 6-1:
CLKO (= FOSC/4)
BLOCK DIAGRAM OF THE TIMER0/WDT PRESCALER
Data Bus M U X 8 1 0 M U X Sync 2 Cycles TMR0 reg
0 1 T0SE
RA4/AN4/T0CKI pin
T0CS PSA PRESCALER 0 WDT Timer 1 31.25 kHz M U X
Set Flag bit TMR0IF on Overflow
8-bit Prescaler 8 8-to-1 MUX PS2:PS0
WDT Enable bit
PSA 0 MUX 1 PSA
WDT Time-out Note: T0CS, T0SE, PSA, PS2:PS0 are (OPTION_REG<5:0>).
2004 Microchip Technology Inc.
DS39598E-page 53
PIC16F818/819
6.3 Using Timer0 with an External Clock
Timer0 module means that there is no prescaler for the Watchdog Timer and vice versa. This prescaler is not readable or writable (see Figure 6-1). The PSA and PS2:PS0 bits (OPTION_REG<3:0>) determine the prescaler assignment and prescale ratio. When assigned to the Timer0 module, all instructions writing to the TMR0 register (e.g., CLRF 1, MOVWF 1, BSF 1, x....etc.) will clear the prescaler. When assigned to WDT, a CLRWDT instruction will clear the prescaler along with the Watchdog Timer. The prescaler is not readable or writable. Note: Writing to TMR0 when the prescaler is assigned to Timer0 will clear the prescaler count but will not change the prescaler assignment.
When no prescaler is used, the external clock input is the same as the prescaler output. The synchronization of T0CKI with the internal phase clocks is accomplished by sampling the prescaler output on the Q2 and Q4 cycles of the internal phase clocks. Therefore, it is necessary for T0CKI to be high for at least 2 TOSC (and a small RC delay of 20 ns) and low for at least 2 TOSC (and a small RC delay of 20 ns). Refer to the electrical specification of the desired device.
6.4
Prescaler
There is only one prescaler available which is mutually exclusively shared between the Timer0 module and the Watchdog Timer. A prescaler assignment for the
REGISTER 6-1:
OPTION_REG: OPTION REGISTER (ADDRESS 81h, 181h)
R/W-1 RBPU bit 7 R/W-1 INTEDG R/W-1 T0CS R/W-1 T0SE R/W-1 PSA R/W-1 PS2 R/W-1 PS1 R/W-1 PS0 bit 0
bit 7
RBPU: PORTB Pull-up Enable bit 1 = PORTB pull-ups are disabled 0 = PORTB pull-ups are enabled by individual port latch values INTEDG: Interrupt Edge Select bit 1 = Interrupt on rising edge of RB0/INT pin 0 = Interrupt on falling edge of RB0/INT pin T0CS: TMR0 Clock Source Select bit 1 = Transition on T0CKI pin 0 = Internal instruction cycle clock (CLKO) T0SE: TMR0 Source Edge Select bit 1 = Increment on high-to-low transition on T0CKI pin 0 = Increment on low-to-high transition on T0CKI pin PSA: Prescaler Assignment bit 1 = Prescaler is assigned to the WDT 0 = Prescaler is assigned to the Timer0 module PS2:PS0: Prescaler Rate Select bits Bit Value TMR0 Rate WDT Rate 1:2 000 1:1 1:4 001 1:2 1:8 010 1:4 1 : 16 011 1:8 1 : 32 100 1 : 16 1 : 64 101 1 : 32 1 : 128 110 1 : 64 1 : 256 111 1 : 128 Legend: R = Readable bit -n = Value at POR Note:
bit 6
bit 5
bit 4
bit 3
bit 2-0
W = Writable bit `1' = Bit is set
U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown
To avoid an unintended device Reset, the instruction sequence shown in the "PICmicro(R) Mid-Range MCU Family Reference Manual" (DS33023) must be executed when changing the prescaler assignment from Timer0 to the WDT. This sequence must be followed even if the WDT is disabled.
DS39598E-page 54
2004 Microchip Technology Inc.
PIC16F818/819
EXAMPLE 6-1:
BANKSEL MOVLW MOVWF BANKSEL CLRF BANKSEL MOVLW MOVWF CLRWDT MOVLW MOVWF
CHANGING THE PRESCALER ASSIGNMENT FROM TIMER0 TO WDT
; ; ; ; ; ; ; Select Bank of OPTION_REG Select clock source and prescale value of other than 1:1 Select Bank of TMR0 Clear TMR0 and prescaler Select Bank of OPTION_REG Select WDT, do not change prescale value
OPTION_REG b'xx0x0xxx' OPTION_REG TMR0 TMR0 OPTION_REG b'xxxx1xxx' OPTION_REG b'xxxx1xxx' OPTION_REG
; Clears WDT and prescaler ; Select new prescale value and WDT
EXAMPLE 6-2:
CHANGING THE PRESCALER ASSIGNMENT FROM WDT TO TIMER0
; ; ; ; Clear WDT and prescaler Select Bank of OPTION_REG Select TMR0, new prescale value and clock source
CLRWDT BANKSEL OPTION_REG MOVLW b'xxxx0xxx' MOVWF OPTION_REG
TABLE 6-1:
Address 01h,101h
REGISTERS ASSOCIATED WITH TIMER0
Name Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Value on POR, BOR xxxx xxxx INTE T0SE RBIE TMR0IF PSA PS2 INTF PS1 RBIF PS0 0000 000x 1111 1111 Value on all other Resets uuuu uuuu 0000 000u 1111 1111
TMR0
Timer0 Module Register GIE RBPU PEIE INTEDG TMR0IE T0CS
0Bh,8Bh, INTCON 10Bh,18Bh 81h,181h Legend: OPTION_REG
x = unknown, u = unchanged, - = unimplemented locations read as `0'. Shaded cells are not used by Timer0.
2004 Microchip Technology Inc.
DS39598E-page 55
PIC16F818/819
NOTES:
DS39598E-page 56
2004 Microchip Technology Inc.
PIC16F818/819
7.0 TIMER1 MODULE
The operating mode is determined by the clock select bit, TMR1CS (T1CON<1>). In Timer mode, Timer1 increments every instruction cycle. In Counter mode, it increments on every rising edge of the external clock input. Timer1 can be enabled/disabled by setting/clearing control bit, TMR1ON (T1CON<0>). Timer1 also has an internal "Reset input". This Reset can be generated by the CCP1 module as the special event trigger (see Section 9.1 "Capture Mode"). Register 7-1 shows the Timer1 Control register. When the Timer1 oscillator is enabled (T1OSCEN is set), the RB6/T1OSO/T1CKI/PGC and RB7/T1OSI/ PGD pins become inputs. That is, the TRISB<7:6> value is ignored and these pins read as `0'. Additional information on timer modules is available in the "PICmicro(R) Mid-Range MCU Family Reference Manual" (DS33023). The Timer1 module is a 16-bit timer/counter consisting of two 8-bit registers (TMR1H and TMR1L) which are readable and writable. The TMR1 register pair (TMR1H:TMR1L) increments from 0000h to FFFFh and rolls over to 0000h. The TMR1 interrupt, if enabled, is generated on overflow which is latched in interrupt flag bit, TMR1IF (PIR1<0>). This interrupt can be enabled/disabled by setting/clearing TMR1 Interrupt Enable bit, TMR1IE (PIE1<0>). Timer1 can also be used to provide Real-Time Clock (RTC) functionality to applications with only a minimal addition of external components and code overhead.
7.1
Timer1 Operation
Timer1 can operate in one of three modes: * as a timer * as a synchronous counter * as an asynchronous counter
REGISTER 7-1:
T1CON: TIMER1 CONTROL REGISTER (ADDRESS 10h)
U-0 -- bit 7 U-0 -- R/W-0 T1CKPS1 R/W-0 T1CKPS0 R/W-0 T1OSCEN R/W-0 R/W-0 R/W-0 bit 0 T1SYNC TMR1CS TMR1ON
bit 7-6 bit 5-4
Unimplemented: Read as `0' T1CKPS1:T1CKPS0: Timer1 Input Clock Prescale Select bits 11 = 1:8 Prescale value 10 = 1:4 Prescale value 01 = 1:2 Prescale value 00 = 1:1 Prescale value T1OSCEN: Timer1 Oscillator Enable Control bit 1 = Oscillator is enabled 0 = Oscillator is shut-off (the oscillator inverter is turned off to eliminate power drain) T1SYNC: Timer1 External Clock Input Synchronization Control bit TMR1CS = 1: 1 = Do not synchronize external clock input 0 = Synchronize external clock input TMR1CS = 0: This bit is ignored. Timer1 uses the internal clock when TMR1CS = 0. TMR1CS: Timer1 Clock Source Select bit 1 = External clock from pin RB6/T1OSO/T1CKI/PGC (on the rising edge) 0 = Internal clock (FOSC/4) TMR1ON: Timer1 On bit 1 = Enables Timer1 0 = Stops Timer1 Legend: R = Readable bit -n = Value at POR W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown
bit 3
bit 2
bit 1
bit 0
2004 Microchip Technology Inc.
DS39598E-page 57
PIC16F818/819
7.2 Timer1 Operation in Timer Mode 7.4
Timer mode is selected by clearing the TMR1CS (T1CON<1>) bit. In this mode, the input clock to the timer is FOSC/4. The synchronize control bit, T1SYNC (T1CON<2>), has no effect since the internal clock is always in sync.
Timer1 Operation in Synchronized Counter Mode
Counter mode is selected by setting bit TMR1CS. In this mode, the timer increments on every rising edge of clock input on pin RB7/T1OSI/PGD when bit T1OSCEN is set, or on pin RB6/T1OSO/T1CKI/PGC when bit T1OSCEN is cleared. If T1SYNC is cleared, then the external clock input is synchronized with internal phase clocks. The synchronization is done after the prescaler stage. The prescaler stage is an asynchronous ripple counter. In this configuration, during Sleep mode, Timer1 will not increment even if the external clock is present, since the synchronization circuit is shut-off. The prescaler, however, will continue to increment.
7.3
Timer1 Counter Operation
Timer1 may operate in Asynchronous or Synchronous mode depending on the setting of the TMR1CS bit. When Timer1 is being incremented via an external source, increments occur on a rising edge. After Timer1 is enabled in Counter mode, the module must first have a falling edge before the counter begins to increment.
FIGURE 7-1:
T1CKI (Default High)
TIMER1 INCREMENTING EDGE
T1CKI (Default Low)
Note: Arrows indicate counter increments.
FIGURE 7-2:
TIMER1 BLOCK DIAGRAM
Set Flag bit TMR1IF on Overflow TMR1H
TMR1 TMR1L
0
Synchronized Clock Input
1 TMR1ON On/Off T1OSC 1 RB6/T1OSO/T1CKI/PGC T1OSCEN FOSC/4 Enable Internal Oscillator(1) Clock Prescaler 1, 2, 4, 8 0 2 T1CKPS1:T1CKPS0 TMR1CS Note 1: When the T1OSCEN bit is cleared, the inverter is turned off. This eliminates power drain. Q Clock Synchronize det T1SYNC
RB7/T1OSI/PGD
DS39598E-page 58
2004 Microchip Technology Inc.
PIC16F818/819
7.5 Timer1 Operation in Asynchronous Counter Mode
7.5.1 READING AND WRITING TIMER1 IN ASYNCHRONOUS COUNTER MODE
If control bit, T1SYNC (T1CON<2>), is set, the external clock input is not synchronized. The timer continues to increment asynchronous to the internal phase clocks. The timer will continue to run during Sleep and can generate an interrupt on overflow that will wake-up the processor. However, special precautions in software are needed to read/write the timer. In Asynchronous Counter mode, Timer1 cannot be used as a time base for capture or compare operations.
Reading TMR1H or TMR1L while the timer is running from an external asynchronous clock will ensure a valid read (taken care of in hardware). However, the user should keep in mind that reading the 16-bit timer in two 8-bit values itself poses certain problems, since the timer may overflow between the reads. For writes, it is recommended that the user simply stop the timer and write the desired values. A write contention may occur by writing to the timer registers while the register is incrementing. This may produce an unpredictable value in the timer register. Reading the 16-bit value requires some care. The example codes provided in Example 7-1 and Example 7-2 demonstrate how to write to and read Timer1 while it is running in Asynchronous mode.
EXAMPLE 7-1:
WRITING A 16-BIT FREE RUNNING TIMER
; All interrupts are disabled CLRF TMR1L ; Clear Low byte, Ensures no rollover into TMR1H MOVLW HI_BYTE ; Value to load into TMR1H MOVWF TMR1H, F ; Write High byte MOVLW LO_BYTE ; Value to load into TMR1L MOVWF TMR1H, F ; Write Low byte ; Re-enable the Interrupt (if required) CONTINUE ; Continue with your code
EXAMPLE 7-2:
READING A 16-BIT FREE RUNNING TIMER
; All interrupts are disabled MOVF TMR1H, W ; Read high byte MOVWF TMPH MOVF TMR1L, W ; Read low byte MOVWF TMPL MOVF TMR1H, W ; Read high byte SUBWF TMPH, W ; Sub 1st read with 2nd read BTFSC STATUS, Z ; Is result = 0 GOTO CONTINUE ; Good 16-bit read ; TMR1L may have rolled over between the read of the high and low bytes. ; Reading the high and low bytes now will read a good value. MOVF TMR1H, W ; Read high byte MOVWF TMPH MOVF TMR1L, W ; Read low byte MOVWF TMPL ; Re-enable the Interrupt (if required) CONTINUE ; Continue with your code
2004 Microchip Technology Inc.
DS39598E-page 59
PIC16F818/819
7.6 Timer1 Oscillator
TABLE 7-1:
Osc Type LP A crystal oscillator circuit is built-in between pins T1OSI (input) and T1OSO (amplifier output). It is enabled by setting control bit, T1OSCEN (T1CON<3>). The oscillator is a low-power oscillator, rated up to 32.768 kHz. It will continue to run during Sleep. It is primarily intended for a 32 kHz crystal. The circuit for a typical LP oscillator is shown in Figure 7-3. Table 7-1 shows the capacitor selection for the Timer1 oscillator. The user must provide a software time delay to ensure proper oscillator start-up. Note: The Timer1 oscillator shares the T1OSI and T1OSO pins with the PGD and PGC pins used for programming and debugging. When using the Timer1 oscillator, In-Circuit Serial ProgrammingTM (ICSPTM) may not function correctly (high-voltage or lowvoltage) or the In-Circuit Debugger (ICD) may not communicate with the controller. As a result of using either ICSP or ICD, the Timer1 crystal may be damaged. If ICSP or ICD operations are required, the crystal should be disconnected from the circuit (disconnect either lead) or installed after programming. The oscillator loading capacitors may remain in-circuit during ICSP or ICD operation.
CAPACITOR SELECTION FOR THE TIMER1 OSCILLATOR
Freq 32 kHz C1 33 pF C2 33 pF
Note 1: Microchip suggests this value as a starting point in validating the oscillator circuit. 2: Higher capacitance increases the stability of the oscillator but also increases the start-up time. 3: Since each resonator/crystal has its own characteristics, the user should consult the resonator/crystal manufacturer for appropriate values of external components. 4: Capacitor values are for design guidance only.
7.7
Timer1 Oscillator Layout Considerations
The Timer1 oscillator circuit draws very little power during operation. Due to the low-power nature of the oscillator, it may also be sensitive to rapidly changing signals in close proximity. The oscillator circuit, shown in Figure 7-3, should be located as close as possible to the microcontroller. There should be no circuits passing within the oscillator circuit boundaries other than VSS or VDD. If a high-speed circuit must be located near the oscillator, a grounded guard ring around the oscillator circuit, as shown in Figure 7-4, may be helpful when used on a single-sided PCB or in addition to a ground plane.
FIGURE 7-3:
EXTERNAL COMPONENTS FOR THE TIMER1 LP OSCILLATOR
PIC16F818/819
T1OSI XTAL 32.768 kHz T1OSO
C1 33 pF
FIGURE 7-4:
OSCILLATOR CIRCUIT WITH GROUNDED GUARD RING
C2 33 pF Note: See the Notes with Table 7-1 for additional information about capacitor selection.
VSS OSC1 OSC2
RB7 RB6
RB5
DS39598E-page 60
2004 Microchip Technology Inc.
PIC16F818/819
7.8 Resetting Timer1 Using a CCP Trigger Output 7.11 Using Timer1 as a Real-Time Clock
If the CCP1 module is configured in Compare mode to generate a "special event trigger" signal (CCP1M3:CCP1M0 = 1011), the signal will reset Timer1 and start an A/D conversion (if the A/D module is enabled). Timer1 must be configured for either Timer or Synchronized Counter mode to take advantage of this feature. If Timer1 is running in Asynchronous Counter mode, this Reset operation may not work. In the event that a write to Timer1 coincides with a special event trigger from CCP1, the write will take precedence. In this mode of operation, the CCPR1H:CCPR1L register pair effectively becomes the period register for Timer1.
Adding an external LP oscillator to Timer1 (such as the one described in Section 7.6 "Timer1 Oscillator"), gives users the option to include RTC functionality in their applications. This is accomplished with an inexpensive watch crystal to provide an accurate time base and several lines of application code to calculate the time. When operating in Sleep mode and using a battery or supercapacitor as a power source, it can completely eliminate the need for a separate RTC device and battery backup. The application code routine, RTCisr, shown in Example 7-3, demonstrates a simple method to increment a counter at one-second intervals using an Interrupt Service Routine. Incrementing the TMR1 register pair to overflow, triggers the interrupt and calls the routine which increments the seconds counter by one; additional counters for minutes and hours are incremented as the previous counter overflows. Since the register pair is 16 bits wide, counting up to overflow the register directly from a 32.768 kHz clock would take 2 seconds. To force the overflow at the required one-second intervals, it is necessary to preload it; the simplest method is to set the MSb of TMR1H with a BSF instruction. Note that the TMR1L register is never preloaded or altered; doing so may introduce cumulative error over many cycles. For this method to be accurate, Timer1 must operate in Asynchronous mode and the Timer1 overflow interrupt must be enabled (PIE1<0> = 1) as shown in the routine, RTCinit. The Timer1 oscillator must also be enabled and running at all times.
7.9
Resetting Timer1 Register Pair (TMR1H, TMR1L)
TMR1H and TMR1L registers are not reset to 00h on a POR or any other Reset, except by the CCP1 special event triggers. T1CON register is reset to 00h on a Power-on Reset or a Brown-out Reset, which shuts off the timer and leaves a 1:1 prescale. In all other Resets, the register is unaffected.
7.10
Timer1 Prescaler
The prescaler counter is cleared on writes to the TMR1H or TMR1L registers.
2004 Microchip Technology Inc.
DS39598E-page 61
PIC16F818/819
EXAMPLE 7-3:
RTCinit
IMPLEMENTING A REAL-TIME CLOCK USING A TIMER1 INTERRUPT SERVICE
TMR1H 0x80 TMR1H TMR1L b'00001111' T1CON secs mins .12 hours PIE1 PIE1, TMR1IE TMR1H TMR1H, 7 PIR1, TMR1IF secs, F secs, w .60 STATUS, Z seconds mins, f mins, w .60 STATUS, Z mins hours, f hours, w .24 STATUS, Z hours ; Preload TMR1 register pair ; for 1 second overflow ; Configure for external clock, ; Asynchronous operation, external oscillator ; Initialize timekeeping registers
RTCisr
BANKSEL MOVLW MOVWF CLRF MOVLW MOVWF CLRF CLRF MOVLW MOVWF BANKSEL BSF RETURN BANKSEL BSF BCF INCF MOVF SUBLW BTFSS RETURN CLRF INCF MOVF SUBLW BTFSS RETURN CLRF INCF MOVF SUBLW BTFSS RETURN CLRF RETURN
; Enable Timer1 interrupt
; Preload for 1 sec overflow ; Clear interrupt flag ; Increment seconds
; ; ; ;
60 seconds elapsed? No, done Clear seconds Increment minutes
; ; ; ;
60 seconds elapsed? No, done Clear minutes Increment hours
; ; ; ;
24 hours elapsed? No, done Clear hours Done
TABLE 7-2:
Address
REGISTERS ASSOCIATED WITH TIMER1 AS A TIMER/COUNTER
Bit 7 GIE -- -- Bit 6 PEIE ADIF ADIE Bit 5 TMR0IE -- -- Bit 4 INTE -- -- Bit 3 RBIE SSPIF SSPIE Bit 2 TMR0IF CCP1IF CCP1IE Bit 1 INTF TMR2IF TMR2IE Bit 0 RBIF Value on POR, BOR Value on all other Resets
Name
0Bh,8Bh, INTCON 10Bh,18Bh 0Ch 8Ch 0Eh 0Fh 10h Legend: PIR1 PIE1 TMR1L TMR1H T1CON
0000 000x 0000 000u
TMR1IF -0-- 0000 -0-- 0000 TMR1IE -0-- 0000 -0-- 0000 xxxx xxxx uuuu uuuu xxxx xxxx uuuu uuuu
Holding Register for the Least Significant Byte of the 16-bit TMR1 Register Holding Register for the Most Significant Byte of the 16-bit TMR1 Register -- --
T1CKPS1 T1CKPS0 T1OSCEN T1SYNC TMR1CS TMR1ON --00 0000 --uu uuuu
x = unknown, u = unchanged, - = unimplemented, read as `0'. Shaded cells are not used by the Timer1 module.
DS39598E-page 62
2004 Microchip Technology Inc.
PIC16F818/819
8.0 TIMER2 MODULE
8.1 Timer2 Prescaler and Postscaler
Timer2 is an 8-bit timer with a prescaler and a postscaler. It can be used as the PWM time base for the PWM mode of the CCP1 module. The TMR2 register is readable and writable and is cleared on any device Reset. The input clock (FOSC/4) has a prescale option of 1:1, 1:4 or 1:16, selected by control bits, T2CKPS1:T2CKPS0 (T2CON<1:0>). The Timer2 module has an 8-bit period register, PR2. Timer2 increments from 00h until it matches PR2 and then resets to 00h on the next increment cycle. PR2 is a readable and writable register. The PR2 register is initialized to FFh upon Reset. The match output of TMR2 goes through a 4-bit postscaler (which gives a 1:1 to 1:16 scaling inclusive) to generate a TMR2 interrupt (latched in flag bit, TMR2IF (PIR1<1>)). Timer2 can be shut-off by clearing control bit, TMR2ON (T2CON<2>), to minimize power consumption. Register 8-1 shows the Timer2 Control register. Additional information on timer modules is available in the "PICmicro(R) Mid-Range MCU Family Reference Manual" (DS33023).
Postscaler 1:1 to 1:16 4 EQ Comparator
The prescaler and postscaler counters are cleared when any of the following occurs: * A write to the TMR2 register * A write to the T2CON register * Any device Reset (Power-on Reset, MCLR, WDT Reset or Brown-out Reset) TMR2 is not cleared when T2CON is written.
8.2
Output of TMR2
The output of TMR2 (before the postscaler) is fed to the Synchronous Serial Port module which optionally uses it to generate a shift clock.
FIGURE 8-1:
Sets Flag bit TMR2IF TMR2 Output(1) Reset
TIMER2 BLOCK DIAGRAM
TMR2 reg
Prescaler 1:1, 1:4, 1:16 2
FOSC/4
PR2 reg
Note 1: TMR2 register output can be software selected by the SSP module as a baud clock.
2004 Microchip Technology Inc.
DS39598E-page 63
PIC16F818/819
REGISTER 8-1: T2CON: TIMER2 CONTROL REGISTER (ADDRESS 12h)
U-0 -- bit 7 bit 7 bit 6-3 Unimplemented: Read as `0' TOUTPS3:TOUTPS0: Timer2 Output Postscale Select bits 0000 = 1:1 Postscale 0001 = 1:2 Postscale 0010 = 1:3 Postscale * * * 1111 = 1:16 Postscale TMR2ON: Timer2 On bit 1 = Timer2 is on 0 = Timer2 is off T2CKPS1:T2CKPS0: Timer2 Clock Prescale Select bits 00 = Prescaler is 1 01 = Prescaler is 4 1x = Prescaler is 16 Legend: R = Readable bit -n = Value at POR W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 bit 0 TOUTPS3 TOUTPS2 TOUTPS1 TOUTPS0 TMR2ON T2CKPS1 T2CKPS0
bit 2
bit 1-0
TABLE 8-1:
Address
REGISTERS ASSOCIATED WITH TIMER2 AS A TIMER/COUNTER
Bit 7 GIE -- -- -- Bit 6 PEIE ADIF ADIE Bit 5 TMR0IE -- -- Bit 4 INTE -- -- Bit 3 RBIE SSPIF SSPIE Bit 2 TMR0IF CCP1IF CCP1IE Bit 1 INTF TMR2IF TMR2IE Bit 0 RBIF Value on POR, BOR Value on all other Resets
Name
0Bh, 8Bh, INTCON 10Bh, 18Bh 0Ch 8Ch 11h 12h 92h Legend: PIR1 PIE1 TMR2 T2CON PR2
0000 000x 0000 000u
TMR1IF -0-- 0000 -0-- 0000 TMR1IE -0-- 0000 -0-- 0000 0000 0000 0000 0000 1111 1111 1111 1111
Timer2 Module Register Timer2 Period Register
TOUTPS3 TOUTPS2 TOUTPS1 TOUTPS0 TMR2ON T2CKPS1 T2CKPS0 -000 0000 -000 0000
x = unknown, u = unchanged, - = unimplemented, read as `0'. Shaded cells are not used by the Timer2 module.
DS39598E-page 64
2004 Microchip Technology Inc.
PIC16F818/819
9.0 CAPTURE/COMPARE/PWM (CCP) MODULE
The CCP module's input/output pin (CCP1) can be configured as RB2 or RB3. This selection is set in bit 12 (CCPMX) of the Configuration Word register. Additional information on the CCP module is available in the "PICmicro(R) Mid-Range MCU Family Reference Manual" (DS33023) and in Application Note AN594, "Using the CCP Module(s)" (DS00594).
The Capture/Compare/PWM (CCP) module contains a 16-bit register that can operate as a: * 16-bit Capture register * 16-bit Compare register * PWM Master/Slave Duty Cycle register Table 9-1 shows the timer resources of the CCP module modes. Capture/Compare/PWM Register 1 (CCPR1) is comprised of two 8-bit registers: CCPR1L (low byte) and CCPR1H (high byte). The CCP1CON register controls the operation of CCP1. The special event trigger is generated by a compare match which will reset Timer1 and start an A/D conversion (if the A/D module is enabled).
TABLE 9-1:
CCP MODE - TIMER RESOURCE
Timer Resource Timer1 Timer1 Timer2
CCP Mode Capture Compare PWM
REGISTER 9-1:
CCP1CON: CAPTURE/COMPARE/PWM CONTROL REGISTER 1 (ADDRESS 17h)
U-0 -- bit 7 U-0 -- R/W-0 CCP1X R/W-0 CCP1Y R/W-0 CCP1M3 R/W-0 CCP1M2 R/W-0 CCP1M1 R/W-0 CCP1M0 bit 0
bit 7-6 bit 5-4
Unimplemented: Read as `0' CCP1X:CCP1Y: PWM Least Significant bits Capture mode: Unused. Compare mode: Unused. PWM mode: These bits are the two LSbs of the PWM duty cycle. The eight MSbs are found in CCPRxL. CCP1M3:CCP1M0: CCP1 Mode Select bits 0000 = Capture/Compare/PWM disabled (resets CCP1 module) 0100 = Capture mode, every falling edge 0101 = Capture mode, every rising edge 0110 = Capture mode, every 4th rising edge 0111 = Capture mode, every 16th rising edge 1000 = Compare mode, set output on match (CCP1IF bit is set) 1001 = Compare mode, clear output on match (CCP1IF bit is set) 1010 = Compare mode, generate software interrupt on match (CCP1IF bit is set, CCP1 pin is unaffected) 1011 = Compare mode, trigger special event (CCP1IF bit is set, CCP1 pin is unaffected); CCP1 resets TMR1 and starts an A/D conversion (if A/D module is enabled) 11xx = PWM mode Legend: R = Readable bit -n = Value at POR W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown
bit 3-0
2004 Microchip Technology Inc.
DS39598E-page 65
PIC16F818/819
9.1 Capture Mode
9.1.2 TIMER1 MODE SELECTION
In Capture mode, CCPR1H:CCPR1L captures the 16-bit value of the TMR1 register when an event occurs on the CCP1 pin. An event is defined as: * * * * Every falling edge Every rising edge Every 4th rising edge Every 16th rising edge Timer1 must be running in Timer mode or Synchronized Counter mode for the CCP module to use the capture feature. In Asynchronous Counter mode, the capture operation may not work.
9.1.3
SOFTWARE INTERRUPT
An event is selected by control bits, CCP1M3:CCP1M0 (CCP1CON<3:0>). When a capture is made, the interrupt request flag bit, CCP1IF (PIR1<2>), is set. It must be cleared in software. If another capture occurs before the value in register CCPR1 is read, the old captured value is overwritten by the new captured value.
When the Capture mode is changed, a false capture interrupt may be generated. The user should keep bit, CCP1IE (PIE1<2>), clear to avoid false interrupts and should clear the flag bit, CCP1IF, following any such change in operating mode.
9.1.4
CCP PRESCALER
9.1.1
CCP PIN CONFIGURATION
In Capture mode, the CCP1 pin should be configured as an input by setting the TRISB bit. Note 1: If the CCP1 pin is configured as an output, a write to the port can cause a capture condition. 2: The TRISB bit (2 or 3) is dependent upon the setting of configuration bit 12 (CCPMX).
There are four prescaler settings specified by bits CCP1M3:CCP1M0. Whenever the CCP module is turned off, or the CCP module is not in Capture mode, the prescaler counter is cleared. This means that any Reset will clear the prescaler counter. Switching from one capture prescaler to another may generate an interrupt. Also, the prescaler counter will not be cleared; therefore, the first capture may be from a non-zero prescaler. Example 9-1 shows the recommended method for switching between capture prescalers. This example also clears the prescaler counter and will not generate the "false" interrupt.
FIGURE 9-1:
CAPTURE MODE OPERATION BLOCK DIAGRAM
EXAMPLE 9-1:
CLRF MOVLW
CHANGING BETWEEN CAPTURE PRESCALERS
Set Flag bit CCP1IF (PIR1<2>) Prescaler / 1, 4, 16 CCP1 pin and Edge Detect
CCPR1H
CCPR1L
MOVWF
CCP1CON ;Turn CCP module off NEW_CAPT_PS ;Load the W reg with ;the new prescaler ;move value and CCP ON CCP1CON ;Load CCP1CON with this ;value
Capture Enable TMR1H TMR1L
CCP1CON<3:0> Q's
DS39598E-page 66
2004 Microchip Technology Inc.
PIC16F818/819
9.2 Compare Mode
9.2.1 CCP PIN CONFIGURATION
In Compare mode, the 16-bit CCPR1 register value is constantly compared against the TMR1 register pair value. When a match occurs, the CCP1 pin is: * Driven high * Driven low * Remains unchanged The action on the pin is based on the value of control bits, CCP1M3:CCP1M0 (CCP1CON<3:0>). At the same time, interrupt flag bit CCP1IF is set. The user must configure the CCP1 pin as an output by clearing the TRISB bit. Note 1: Clearing the CCP1CON register will force the CCP1 compare output latch to the default low level. This is not the data latch. 2: The TRISB bit (2 or 3) is dependent upon the setting of configuration bit 12 (CCPMX).
FIGURE 9-2:
COMPARE MODE OPERATION BLOCK DIAGRAM
Special Event Trigger Set Flag bit CCP1IF (PIR1<2>) CCPR1H CCPR1L Q S R Output Logic Comparator TMR1H CCP1CON<3:0> Mode Select TMR1L
9.2.2
TIMER1 MODE SELECTION
Timer1 must be running in Timer mode or Synchronized Counter mode if the CCP module is using the compare feature. In Asynchronous Counter mode, the compare operation may not work.
9.2.3
SOFTWARE INTERRUPT MODE
CCP1 pin TRISB Output Enable
Match
When generate software interrupt is chosen, the CCP1 pin is not affected. Only a CCP interrupt is generated (if enabled).
9.2.4
SPECIAL EVENT TRIGGER
Special event trigger will: * Reset Timer1 but not set interrupt flag bit, TMR1IF (PIR1<0>) * Set GO/DONE bit (ADCON0<2>) which starts an A/D conversion
In this mode, an internal hardware trigger is generated that may be used to initiate an action. The special event trigger output of CCP1 resets the TMR1 register pair and starts an A/D conversion (if the A/D module is enabled). This allows the CCPR1 register to effectively be a 16-bit programmable period register for Timer1. Note: The special event trigger from the CCP1 module will not set interrupt flag bit, TMR1IF (PIR1<0>).
TABLE 9-2:
Address
REGISTERS ASSOCIATED WITH CAPTURE, COMPARE AND TIMER1
Name Bit 7 GIE -- -- Bit 6 PEIE ADIF ADIE Bit 5 TMR0IE -- -- Bit 4 INTE -- -- Bit 3 RBIE SSPIF SSPIE Bit 2 TMR0IF Bit 1 INTF Bit 0 RBIF Value on POR, BOR Value on all other Resets
0Bh,8Bh INTCON 10BH,18Bh 0Ch 8Ch 86h 0Eh 0Fh 10h 15h 16h 17h Legend: PIR1 PIE1 TRISB TMR1L TMR1H T1CON CCPR1L CCPR1H CCP1CON
0000 000x 0000 000u
CCP1IF TMR2IF TMR1IF -0-- 0000 -0-- 0000 CCP1IE TMR2IE TMR1IE -0-- 0000 -0-- 0000 1111 1111 1111 1111 xxxx xxxx uuuu uuuu xxxx xxxx uuuu uuuu
PORTB Data Direction Register Holding Register for the Least Significant Byte of the 16-bit TMR1 Register Holding Register for the Most Significant Byte of the 16-bit TMR1 Register -- -- Capture/Compare/PWM Register 1 (LSB) Capture/Compare/PWM Register 1 (MSB) -- -- CCP1X CCP1Y
T1CKPS1 T1CKPS0 T1OSCEN T1SYNC TMR1CS TMR1ON --00 0000 --uu uuuu xxxx xxxx uuuu uuuu xxxx xxxx uuuu uuuu
CCP1M3 CCP1M2 CCP1M1 CCP1M0 --00 0000 --00 0000
x = unknown, u = unchanged, - = unimplemented, read as `0'. Shaded cells are not used by Capture and Timer1.
2004 Microchip Technology Inc.
DS39598E-page 67
PIC16F818/819
9.3 PWM Mode
9.3.1 PWM PERIOD
In Pulse-Width Modulation (PWM) mode, the CCP1 pin produces up to a 10-bit resolution PWM output. Since the CCP1 pin is multiplexed with the PORTB data latch, the TRISB bit must be cleared to make the CCP1 pin an output. Note: Clearing the CCP1CON register will force the CCP1 PWM output latch to the default low level. This is not the PORTB I/O data latch. The PWM period is specified by writing to the PR2 register. The PWM period can be calculated using the following formula.
EQUATION 9-1:
PWM Period = [(PR2) + 1] * 4 * TOSC * (TMR2 Prescale Value) PWM frequency is defined as 1/[PWM period]. When TMR2 is equal to PR2, the following three events occur on the next increment cycle: * TMR2 is cleared * The CCP1 pin is set (exception: if PWM duty cycle = 0%, the CCP1 pin will not be set) * The PWM duty cycle is latched from CCPR1L into CCPR1H Note: The Timer2 postscaler (see Section 8.0 "Timer2 Module") is not used in the determination of the PWM frequency. The postscaler could be used to have a servo update rate at a different frequency than the PWM output.
Figure 9-3 shows a simplified block diagram of the CCP module in PWM mode. For a step by step procedure on how to set up the CCP module for PWM operation, see Section 9.3.3 "Setup for PWM Operation".
FIGURE 9-3:
SIMPLIFIED PWM BLOCK DIAGRAM
CCP1CON<5:4>
Duty Cycle Registers CCPR1L
CCPR1H (Slave)
9.3.2
Comparator R Q CCP1 pin TMR2 (Note 1) S TRISB Clear Timer, CCP1 pin and latch D.C.
PWM DUTY CYCLE
Comparator
The PWM duty cycle is specified by writing to the CCPR1L register and to the CCP1CON<5:4> bits. Up to 10-bit resolution is available. The CCPR1L contains the eight MSbs and the CCP1CON<5:4> contains the two LSbs. This 10-bit value is represented by CCPR1L:CCP1CON<5:4>. The following equation is used to calculate the PWM duty cycle in time.
PR2
EQUATION 9-2:
Note 1: 8-bit timer is concatenated with 2-bit internal Q clock or 2 bits of the prescaler to create 10-bit time base.
PWM Duty Cycle = (CCPR1L:CCP1CON<5:4>) * TOSC * (TMR2 Prescale Value) CCPR1L and CCP1CON<5:4> can be written to at any time but the duty cycle value is not latched into CCPR1H until after a match between PR2 and TMR2 occurs (i.e., the period is complete). In PWM mode, CCPR1H is a read-only register. The CCPR1H register and a 2-bit internal latch are used to double-buffer the PWM duty cycle. This double-buffering is essential for glitchless PWM operation. When the CCPR1H and 2-bit latch match TMR2, concatenated with an internal 2-bit Q clock or 2 bits of the TMR2 prescaler, the CCP1 pin is cleared.
A PWM output (Figure 9-4) has a time base (period) and a time that the output stays high (duty cycle). The frequency of the PWM is the inverse of the period (1/period).
FIGURE 9-4:
Period
PWM OUTPUT
Duty Cycle TMR2 = PR2 TMR2 = Duty Cycle TMR2 = PR2
DS39598E-page 68
2004 Microchip Technology Inc.
PIC16F818/819
The maximum PWM resolution (bits) for a given PWM frequency is given by the following formula.
9.3.3
SETUP FOR PWM OPERATION
EQUATION 9-3:
Resolution = FOSC log( FPWM log(2)
The following steps should be taken when configuring the CCP module for PWM operation: 1. 2. Set the PWM period by writing to the PR2 register. Set the PWM duty cycle by writing to the CCPR1L register and CCP1CON<5:4> bits. Make the CCP1 pin an output by clearing the TRISB bit. Set the TMR2 prescale value and enable Timer2 by writing to T2CON. Configure the CCP1 module for PWM operation. Note: The TRISB bit (2 or 3) is dependant upon the setting of configuration bit 12 (CCPMX).
)
bits
3. 4. 5.
Note:
If the PWM duty cycle value is longer than the PWM period, the CCP1 pin will not be cleared.
TABLE 9-3:
EXAMPLE PWM FREQUENCIES AND RESOLUTIONS AT 20 MHz
PWM Frequency 1.22 kHz 4.88 kHz 19.53 kHz 78.12 kHz 156.3 kHz 208.3 kHz 16 0xFF 10 4 0xFF 10 1 0xFF 10 1 0x3F 8 1 0x1F 7 1 0x17 5.5
Timer Prescaler (1, 4, 16) PR2 Value Maximum Resolution (bits)
TABLE 9-4:
Address
REGISTERS ASSOCIATED WITH PWM AND TIMER2
Bit 7 GIE -- -- Bit 6 PEIE ADIF ADIE Bit 5 TMR0IE -- -- Bit 4 INTE -- -- Bit 3 RBIE SSPIF SSPIE Bit 2 TMR0IF CCP1IF CCP1IE Bit 1 INTF TMR2IF TMR2IE Bit 0 RBIF Value on POR, BOR Value on all other Resets
Name
0Bh,8Bh INTCON 10Bh,18Bh 0Ch 8Ch 86h 11h 92h 12h 15h 16h 17h Legend: PIR1 PIE1 TRISB TMR2 PR2 T2CON CCPR1L CCPR1H CCP1CON
0000 000x 0000 000u
TMR1IF -0-- 0000 -0-- 0000 TMR1IE -0-- 0000 -0-- 0000 1111 1111 1111 1111 0000 0000 0000 0000 1111 1111 1111 1111
PORTB Data Direction Register Timer2 Module Register Timer2 Module Period Register -- Capture/Compare/PWM Register 1 (LSB) Capture/Compare/PWM Register 1 (MSB) -- -- CCP1X CCP1Y
TOUTPS3 TOUTPS2 TOUTPS1 TOUTPS0 TMR2ON T2CKPS1 T2CKPS0 -000 0000 -000 0000 xxxx xxxx uuuu uuuu xxxx xxxx uuuu uuuu CCP1M3 CCP1M2 CCP1M1 CCP1M0 --00 0000 --00 0000
x = unknown, u = unchanged, - = unimplemented, read as `0'. Shaded cells are not used by PWM and Timer2.
2004 Microchip Technology Inc.
DS39598E-page 69
PIC16F818/819
NOTES:
DS39598E-page 70
2004 Microchip Technology Inc.
PIC16F818/819
10.0
10.1
SYNCHRONOUS SERIAL PORT (SSP) MODULE
SSP Module Overview
10.2
SPI Mode
and
This section contains register definitions operational characteristics of the SPI module.
The Synchronous Serial Port (SSP) module is a serial interface useful for communicating with other peripheral or microcontroller devices. These peripheral devices may be serial EEPROMs, shift registers, display drivers, A/D converters, etc. The SSP module can operate in one of two modes: * Serial Peripheral Interface (SPI) * Inter-Integrated Circuit (I2C) An overview of I2C operations and additional information on the SSP module can be found in the "PICmicro(R) Mid-Range MCU Family Reference Manual" (DS33023). Refer to Application Note AN578, "Use of the SSP Module in the I2CTM Multi-Master Environment" (DS00578).
SPI mode allows 8 bits of data to be synchronously transmitted and received simultaneously. To accomplish communication, typically three pins are used: * Serial Data Out (SDO) * Serial Data In (SDI) * Serial Clock (SCK) RB2/SDO/CCP1 RB1/SDI/SDA RB4/SCK/SCL
Additionally, a fourth pin may be used when in a Slave mode of operation: * Slave Select (SS) RB5/SS When initializing the SPI, several options need to be specified. This is done by programming the appropriate control bits in the SSPCON register (SSPCON<5:0>) and the SSPSTAT register (SSPSTAT<7:6>). These control bits allow the following to be specified: * * * * Master mode (SCK is the clock output) Slave mode (SCK is the clock input) Clock Polarity (Idle state of SCK) Clock Edge (output data on rising/falling edge of SCK) * Clock Rate (Master mode only) * Slave Select mode (Slave mode only) Note: Before enabling the module in SPI Slave mode, the state of the clock line (SCK) must match the polarity selected for the Idle state. The clock line can be observed by reading the SCK pin. The polarity of the Idle state is determined by the CKP bit (SSPCON<4>).
2004 Microchip Technology Inc.
DS39598E-page 71
PIC16F818/819
REGISTER 10-1: SSPSTAT: SYNCHRONOUS SERIAL PORT STATUS REGISTER (ADDRESS 94h)
R/W-0 SMP bit 7 bit 7 SMP: SPI Data Input Sample Phase bit SPI Master mode: 1 = Input data sampled at end of data output time 0 = Input data sampled at middle of data output time (Microwire) SPI Slave mode: This bit must be cleared when SPI is used in Slave mode. I2 C mode: This bit must be maintained clear. CKE: SPI Clock Edge Select bit 1 = Transmit occurs on transition from active to Idle clock state 0 = Transmit occurs on transition from Idle to active clock state Note:
2C
R/W-0 CKE
R-0 D/A
R-0 P
R-0 S
R-0 R/W
R-0 UA
R-0 BF bit 0
bit 6
Polarity of clock state is set by the CKP bit (SSPCON<4>).
I mode: This bit must be maintained clear. bit 5 D/A: Data/Address bit (I2C mode only) In I2 C Slave mode: 1 = Indicates that the last byte received was data 0 = Indicates that the last byte received was address P: Stop bit(1) (I2C mode only) 1 = Indicates that a Stop bit has been detected last 0 = Stop bit was not detected last S: Start bit(1) (I2C mode only) 1 = Indicates that a Start bit has been detected last (this bit is `0' on Reset) 0 = Start bit was not detected last R/W: Read/Write Information bit (I2C mode only) Holds the R/W bit information following the last address match and is only valid from address match to the next Start bit, Stop bit or ACK bit. 1 = Read 0 = Write UA: Update Address bit (10-bit I2C mode only) 1 = Indicates that the user needs to update the address in the SSPADD register 0 = Address does not need to be updated BF: Buffer Full Status bit Receive (SPI and I2 C modes): 1 = Receive complete, SSPBUF is full 0 = Receive not complete, SSPBUF is empty Transmit (In I2 C mode only): 1 = Transmit in progress, SSPBUF is full (8 bits) 0 = Transmit complete, SSPBUF is empty Note 1: This bit is cleared when the SSP module is disabled (i.e., the SSPEN bit is cleared). Legend: R = Readable bit -n = Value at POR W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown
bit 4
bit 3
bit 2
bit 1
bit 0
DS39598E-page 72
2004 Microchip Technology Inc.
PIC16F818/819
REGISTER 10-2: SSPCON: SYNCHRONOUS SERIAL PORT CONTROL REGISTER 1 (ADDRESS 14h)
R/W-0 WCOL bit 7 bit 7 WCOL: Write Collision Detect bit 1 = An attempt to write the SSPBUF register failed because the SSP module is busy (must be cleared in software) 0 = No collision SSPOV: Receive Overflow Indicator bit In SPI mode: 1 = A new byte is received while the SSPBUF register is still holding the previous data. In case of overflow, the data in SSPSR is lost. Overflow can only occur in Slave mode. The user must read the SSPBUF, even if only transmitting data, to avoid setting overflow. In Master mode, the overflow bit is not set since each new reception (and transmission) is initiated by writing to the SSPBUF register. 0 = No overflow In I2 C mode: 1 = A byte is received while the SSPBUF register is still holding the previous byte. SSPOV is a "don't care" in Transmit mode. SSPOV must be cleared in software in either mode. 0 = No overflow SSPEN: Synchronous Serial Port Enable bit(1) In SPI mode: 1 = Enables serial port and configures SCK, SDO and SDI as serial port pins 0 = Disables serial port and configures these pins as I/O port pins In I2 C mode: 1 = Enables the serial port and configures the SDA and SCL pins as serial port pins 0 = Disables serial port and configures these pins as I/O port pins Note 1: In both modes, when enabled, these pins must be properly configured as input or output. bit 4 CKP: Clock Polarity Select bit In SPI mode: 1 = Transmit happens on falling edge, receive on rising edge. Idle state for clock is a high level. 0 = Transmit happens on rising edge, receive on falling edge. Idle state for clock is a low level. In I2 C Slave mode: SCK release control. 1 = Enable clock 0 = Holds clock low (clock stretch). (Used to ensure data setup time.) SSPM<3:0>: Synchronous Serial Port Mode Select bits 0000 = SPI Master mode, clock = OSC/4 0001 = SPI Master mode, clock = OSC/16 0010 = SPI Master mode, clock = OSC/64 0011 = SPI Master mode, clock = TMR2 output/2 0100 = SPI Slave mode, clock = SCK pin. SS pin control enabled. 0101 = SPI Slave mode, clock = SCK pin. SS pin control disabled. SS can be used as I/O pin. 0110 = I2C Slave mode, 7-bit address 0111 = I2C Slave mode, 10-bit address 1011 = I2C Firmware Controlled Master mode (Slave Idle) 1110 = I2C Slave mode, 7-bit address with Start and Stop bit interrupts enabled 1111 = I2C Slave mode, 10-bit address with Start and Stop bit interrupts enabled 1000, 1001, 1010, 1100, 1101 = Reserved Legend: R = Readable bit -n = Value at POR
2004 Microchip Technology Inc.
R/W-0 SSPOV
R/W-0 SSPEN
R/W-0 CKP
R/W-0 SSPM3
R/W-0 SSPM2
R/W-0 SSPM1
R/W-0 SSPM0 bit 0
bit 6
bit 5
bit 3-0
W = Writable bit `1' = Bit is set
U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown
DS39598E-page 73
PIC16F818/819
FIGURE 10-1: SSP BLOCK DIAGRAM (SPITM MODE)
Internal Data Bus Read SSPBUF reg Write
To enable the serial port, SSP Enable bit, SSPEN (SSPCON<5>), must be set. To reset or reconfigure SPI mode, clear bit SSPEN, reinitialize the SSPCON register and then set bit SSPEN. This configures the SDI, SDO, SCK and SS pins as serial port pins. For the pins to behave as the serial port function, they must have their data direction bits (in the TRISB register) appropriately programmed. That is: * * * * * SDI must have TRISB<1> set SDO must have TRISB<2> cleared SCK (Master mode) must have TRISB<4> cleared SCK (Slave mode) must have TRISB<4> set SS must have TRISB<5> set Note 1: When the SPI is in Slave mode with the SS pin control enabled (SSPCON<3:0> = 0100), the SPI module will reset if the SS pin is set to VDD. 2: If the SPI is used in Slave mode with CKE = 1, then the SS pin control must be enabled.
SSPSR reg RB1/SDI/SDA bit 0 Shift Clock
RB2/SDO/ CCP1 SS Control Enable RB5/SS Edge Select 2 Clock Select SSPM3:SSPM0 4 Edge Select RB4/SCK/ SCL TRISB<4>
TMR2 Output 2 Prescaler TCY 4, 16, 64
3: When the SPI is in Slave mode with the SS pin control enabled (SSPCON<3:0> = 0100), the state of the SS pin can affect the state read back from the TRISB<2> bit. The peripheral OE signal from the SSP module into PORTB controls the state that is read back from the TRISB<2> bit. If read-modify-write instructions, such as BSF are performed on the TRISB register while the SS pin is high, this will cause the TRISB<2> bit to be set, thus disabling the SDO output.
TABLE 10-1:
Address
REGISTERS ASSOCIATED WITH SPITM OPERATION
Name Bit 7 GIE -- -- Bit 6 PEIE ADIF ADIE Bit 5 TMR0IE -- -- Bit 4 INTE -- -- Bit 3 RBIE SSPIF SSPIE Bit 2 TMR0IF Bit 1 INTF Bit 0 RBIF Value on POR, BOR Value on all other Resets
0Bh,8Bh INTCON 10Bh,18Bh 0Ch 8Ch 86h 13h 14h 94h Legend: PIR1 PIE1 TRISB SSPBUF SSPCON SSPSTAT
0000 000x 0000 000u
CCP1IF TMR2IF TMR1IF -0-- 0000 -0-- 0000 CCP1IE TMR2IE TMR1IE -0-- 0000 -0-- 0000 1111 1111 1111 1111 xxxx xxxx uuuu uuuu SSPM1 UA SSPM0 0000 0000 0000 0000 BF 0000 0000 0000 0000
PORTB Data Direction Register Synchronous Serial Port Receive Buffer/Transmit Register WCOL SSPOV SSPEN SMP CKE D/A CKP P SSPM3 SSPM2 S R/W
x = unknown, u = unchanged, - = unimplemented, read as `0'. Shaded cells are not used by the SSP in SPITM mode.
DS39598E-page 74
2004 Microchip Technology Inc.
PIC16F818/819
FIGURE 10-2:
SCK (CKP = 0, CKE = 0) SCK (CKP = 0, CKE = 1) SCK (CKP = 1, CKE = 0) SCK (CKP = 1, CKE = 1) SDO SDI (SMP = 0) bit 7 SDI (SMP = 1) bit 7 SSPIF bit 0 bit 0 bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0
SPITM MODE TIMING, MASTER MODE
FIGURE 10-3:
SS (Optional)
SPITM MODE TIMING (SLAVE MODE WITH CKE = 0)
SCK (CKP = 0) SCK (CKP = 1)
SDO SDI (SMP = 0)
bit 7
bit 6
bit 5
bit 4
bit 3
bit 2
bit 1
bit 0
bit 7 SSPIF
bit 0
FIGURE 10-4:
SS
SPITM MODE TIMING (SLAVE MODE WITH CKE = 1)
SCK (CKP = 0) SCK (CKP = 1)
SDO
bit 7
bit 6
bit 5
bit 4
bit 3
bit 2
bit 1
bit 0
SDI (SMP = 0) bit 7 SSPIF bit 0
2004 Microchip Technology Inc.
DS39598E-page 75
PIC16F818/819
10.3 SSP I 2C Mode Operation
The SSP module in I 2C mode fully implements all slave functions, except general call support and provides interrupts on Start and Stop bits in hardware to facilitate firmware implementations of the master functions. The SSP module implements the standard mode specifications, as well as 7-bit and 10-bit addressing. Two pins are used for data transfer. These are the RB4/SCK/SCL pin, which is the clock (SCL) and the RB1/SDI/SDA pin, which is the data (SDA). The user must configure these pins as inputs or outputs through the TRISB<4,1> bits. To ensure proper communication of the I2C Slave mode, the TRIS bits (TRISx [SDA, SCL]) corresponding to the I2C pins must be set to `1'. If any TRIS bits (TRISx<7:0>) of the port containing the I2C pins (PORTx [SDA, SCL]) are changed in software during I2C communication using a Read-Modify-Write instruction (BSF, BCF), then the I2C mode may stop functioning properly and I2C communication may suspend. Do not change any of the TRISx bits (TRIS bits of the port containing the I2C pins) using the instruction BSF or BCF during I2C communication. If it is absolutely necessary to change the TRISx bits during communication, the following method can be used:
EXAMPLE 10-1:
MOVF IORLW ANDLW MOVWF TRISC, W 0x18 B'11111001' TRISC ; ; ; ; Example for an 18-pin part such as the PIC16F818/819 Ensures <4:3> bits are `11' Sets <2:1> as output, but will not alter other bits User can use their own logic here, such as IORLW, XORLW and ANDLW
The SSP module functions are enabled by setting SSP Enable bit, SSPEN (SSPCON<5>).
The SSPCON register allows control of the I 2C operation. Four mode selection bits (SSPCON<3:0>) allow one of the following I 2C modes to be selected: * I 2C Slave mode (7-bit address) * I 2C Slave mode (10-bit address) * I 2C Slave mode (7-bit address) with Start and Stop bit interrupts enabled to support Firmware Master mode * I 2C Slave mode (10-bit address) with Start and Stop bit interrupts enabled to support Firmware Master mode * I 2C Firmware Controlled Master mode with Start and Stop bit interrupts enabled, slave is Idle Selection of any I 2C mode, with the SSPEN bit set, forces the SCL and SDA pins to be open-drain, provided these pins are programmed to inputs by setting the appropriate TRISB bits. Pull-up resistors must be provided externally to the SCL and SDA pins for proper operation of the I2C module. Additional information on SSP I2C operation may be found in the "PICmicro(R) Mid-Range MCU Family Reference Manual" (DS33023).
FIGURE 10-5:
SSP BLOCK DIAGRAM (I2CTM MODE)
Internal Data Bus
Read RB4/SCK/ SCL Shift Clock SSPSR Reg RB1/ SDI/ SDA MSb SSPBUF Reg
Write
LSb Addr Match
Match Detect
SSPADD Reg Start and Stop Bit Detect Set, Reset S, P Bits (SSPSTAT Reg)
The SSP module has five registers for I2C operation: * * * * SSP Control Register (SSPCON) SSP Status Register (SSPSTAT) Serial Receive/Transmit Buffer (SSPBUF) SSP Shift Register (SSPSR) - Not directly accessible * SSP Address Register (SSPADD)
DS39598E-page 76
2004 Microchip Technology Inc.
PIC16F818/819
10.3.1 SLAVE MODE
In Slave mode, the SCL and SDA pins must be configured as inputs (TRISB<4,1> set). The SSP module will override the input state with the output data when required (slave-transmitter). When an address is matched, or the data transfer after an address match is received, the hardware automatically will generate the Acknowledge (ACK) pulse and then load the SSPBUF register with the received value currently in the SSPSR register. Either or both of the following conditions will cause the SSP module not to give this ACK pulse: a) b) The Buffer Full bit, BF (SSPSTAT<0>), was set before the transfer was received. The overflow bit, SSPOV (SSPCON<6>), was set before the transfer was received. The sequence of events for 10-bit address is as follows, with steps 7-9 for slave-transmitter: 1. 2. Receive first (high) byte of address (bits SSPIF, BF and bit UA (SSPSTAT<1>) are set). Update the SSPADD register with second (low) byte of address (clears bit UA and releases the SCL line). Read the SSPBUF register (clears bit BF) and clear flag bit, SSPIF. Receive second (low) byte of address (bits SSPIF, BF and UA are set). Update the SSPADD register with the first (high) byte of address; if match releases SCL line, this will clear bit UA. Read the SSPBUF register (clears bit BF) and clear flag bit, SSPIF. Receive Repeated Start condition. Receive first (high) byte of address (bits SSPIF and BF are set). Read the SSPBUF register (clears bit BF) and clear flag bit, SSPIF.
3. 4. 5.
6. 7. 8. 9.
In this case, the SSPSR register value is not loaded into the SSPBUF but bit, SSPIF (PIR1<3>), is set. Table 10-2 shows what happens when a data transfer byte is received, given the status of bits BF and SSPOV. The shaded cells show the condition where user software did not properly clear the overflow condition. Flag bit BF is cleared by reading the SSPBUF register while bit SSPOV is cleared through software. The SCL clock input must have a minimum high and low for proper operation. The high and low times of the I2C specification, as well as the requirement of the SSP module, are shown in timing parameter #100 and parameter #101.
10.3.1.2
Reception
When the R/W bit of the address byte is clear and an address match occurs, the R/W bit of the SSPSTAT register is cleared. The received address is loaded into the SSPBUF register. When the address byte overflow condition exists, then a no Acknowledge (ACK) pulse is given. An overflow condition is indicated if either bit, BF (SSPSTAT<0>), is set or bit, SSPOV (SSPCON<6>), is set. An SSP interrupt is generated for each data transfer byte. Flag bit, SSPIF (PIR1<3>), must be cleared in software. The SSPSTAT register is used to determine the status of the byte.
10.3.1.1
Addressing
Once the SSP module has been enabled, it waits for a Start condition to occur. Following the Start condition, the eight bits are shifted into the SSPSR register. All incoming bits are sampled with the rising edge of the clock (SCL) line. The value of register SSPSR<7:1> is compared to the value of the SSPADD register. The address is compared on the falling edge of the eighth clock (SCL) pulse. If the addresses match and the BF and SSPOV bits are clear, the following events occur: a) b) c) d) The SSPSR register value is loaded into the SSPBUF register. The Buffer Full bit, BF, is set. An ACK pulse is generated. SSP Interrupt Flag bit, SSPIF (PIR1<3>), is set (interrupt is generated if enabled) - on the falling edge of the ninth SCL pulse.
10.3.1.3
Transmission
In 10-bit Address mode, two address bytes need to be received by the slave device. The five Most Significant bits (MSbs) of the first address byte specify if this is a 10-bit address. Bit R/W (SSPSTAT<2>) must specify a write so the slave device will receive the second address byte. For a 10-bit address, the first byte would equal `1111 0 A9 A8 0', where A9 and A8 are the two MSbs of the address.
When the R/W bit of the incoming address byte is set and an address match occurs, the R/W bit of the SSPSTAT register is set. The received address is loaded into the SSPBUF register. The ACK pulse will be sent on the ninth bit and pin RB4/SCK/SCL is held low. The transmit data must be loaded into the SSPBUF register which also loads the SSPSR register. Then pin RB4/SCK/SCL should be enabled by setting bit, CKP (SSPCON<4>). The master device must monitor the SCL pin prior to asserting another clock pulse. The slave devices may be holding off the master device by stretching the clock. The eight data bits are shifted out on the falling edge of the SCL input. This ensures that the SDA signal is valid during the SCL high time (Figure 10-7).
2004 Microchip Technology Inc.
DS39598E-page 77
PIC16F818/819
An SSP interrupt is generated for each data transfer byte. Flag bit SSPIF must be cleared in software and the SSPSTAT register is used to determine the status of the byte. Flag bit SSPIF is set on the falling edge of the ninth clock pulse. As a slave-transmitter, the ACK pulse from the masterreceiver is latched on the rising edge of the ninth SCL input pulse. If the SDA line was high (not ACK), then the data transfer is complete. When the ACK is latched by the slave device, the slave logic is reset (resets SSPSTAT register) and the slave device then monitors for another occurrence of the Start bit. If the SDA line was low (ACK), the transmit data must be loaded into the SSPBUF register which also loads the SSPSR register. Then pin RB4/SCK/SCL should be enabled by setting bit, CKP.
TABLE 10-2:
DATA TRANSFER RECEIVED BYTE ACTIONS
SSPSR SSPBUF Yes No No No Generate ACK Pulse Set bit SSPIF (SSP interrupt occurs if enabled) Yes Yes Yes Yes
Status Bits as Data Transfer is Received BF 0 1 1 0 Note 1: SSPOV 0 0 1 1
Yes No No No
Shaded cells show the conditions where the user software did not properly clear the overflow condition.
FIGURE 10-6:
I 2CTM WAVEFORMS FOR RECEPTION (7-BIT ADDRESS)
SDA
Receiving Address R/W = 0 Receiving Data Receiving Data ACK ACK ACK A7 A6 A5 A4 A3 A2 A1 D7 D6 D5 D4 D3 D2 D1 D0 D7 D6 D5 D4 D3 D2 D1 D0 S 1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9 P
SCL
SSPIF (PIR1<3>)
Cleared in software
Bus master terminates transfer
BF (SSPSTAT<0>)
SSPBUF register is read
SSPOV (SSPCON<6>) Bit SSPOV is set because the SSPBUF register is still full ACK is not sent
FIGURE 10-7:
I 2CTM WAVEFORMS FOR TRANSMISSION (7-BIT ADDRESS)
Receiving Address R/W = 1 A1 ACK D7 D6 D5 D4 Transmitting Data D3 D2 D1 D0 ACK
SDA
A7
A6
A5
A4
A3
A2
SCL
S
1 2 Data is Sampled
3
4
5
6
7
8
9
1 SCL held low while CPU responds to SSPIF
2
3
4
5
6
7
8
9
P
SSPIF (PIR1<3>) BF (SSPSTAT<0>) CKP (SSPCON<4>)
Cleared in software
SSPBUF is written in software
From SSP Interrupt Service Routine
Set bit after writing to SSPBUF (the SSPBUF must be written to before the CKP bit can be set)
DS39598E-page 78
2004 Microchip Technology Inc.
PIC16F818/819
10.3.2 MASTER MODE OPERATION 10.3.3 MULTI-MASTER MODE OPERATION
Master mode operation is supported in firmware using interrupt generation on the detection of the Start and Stop conditions. The Stop (P) and Start (S) bits are cleared from a Reset or when the SSP module is disabled. The Stop (P) and Start (S) bits will toggle based on the Start and Stop conditions. Control of the I 2C bus may be taken when the P bit is set or the bus is Idle and both the S and P bits are clear. In Master mode operation, the SCL and SDA lines are manipulated in firmware by clearing the corresponding TRISB<4,1> bit(s). The output level is always low, irrespective of the value(s) in PORTB<4,1>. So when transmitting data, a `1' data bit must have the TRISB<1> bit set (input) and a `0' data bit must have the TRISB<1> bit cleared (output). The same scenario is true for the SCL line with the TRISB<4> bit. Pull-up resistors must be provided externally to the SCL and SDA pins for proper operation of the I2C module. The following events will cause the SSP Interrupt Flag bit, SSPIF, to be set (SSP interrupt if enabled): * Start condition * Stop condition * Data transfer byte transmitted/received Master mode operation can be done with either the Slave mode Idle (SSPM3:SSPM0 = 1011) or with the Slave mode active. When both Master mode operation and Slave modes are used, the software needs to differentiate the source(s) of the interrupt. For more information on Master mode operation, see AN554, "Software Implementation of I2CTM Bus Master" (DS00554). In Multi-Master mode operation, the interrupt generation on the detection of the Start and Stop conditions allows the determination of when the bus is free. The Stop (P) and Start (S) bits are cleared from a Reset or when the SSP module is disabled. The Stop (P) and Start (S) bits will toggle based on the Start and Stop conditions. Control of the I 2C bus may be taken when bit P (SSPSTAT<4>) is set or the bus is Idle and both the S and P bits clear. When the bus is busy, enabling the SSP interrupt will generate the interrupt when the Stop condition occurs. In Multi-Master mode operation, the SDA line must be monitored to see if the signal level is the expected output level. This check only needs to be done when a high level is output. If a high level is expected and a low level is present, the device needs to release the SDA and SCL lines (set TRISB<4,1>). There are two stages where this arbitration can be lost: * Address Transfer * Data Transfer When the slave logic is enabled, the Slave device continues to receive. If arbitration was lost during the address transfer stage, communication to the device may be in progress. If addressed, an ACK pulse will be generated. If arbitration was lost during the data transfer stage, the device will need to retransfer the data at a later time. For more information on Multi-Master mode operation, see AN578, "Use of the SSP Module in the I2CTM Multi-Master Environment" (DS00578).
TABLE 10-3:
Address
REGISTERS ASSOCIATED WITH I2CTM OPERATION
Bit 7 GIE -- -- Bit 6 PEIE ADIF ADIE Bit 5 TMR0IE -- -- Bit 4 INTE -- -- Bit 3 RBIE Bit 2 TMR0IF Bit 1 INTF Bit 0 RBIF Value on POR, BOR 0000 000x -0-- 0000 -0-- 0000 xxxx xxxx 0000 0000 0000 0000 0000 0000 1111 1111 Value on all other Resets 0000 000u -0-- 0000 -0-- 0000 uuuu uuuu 0000 0000 0000 0000 0000 0000 1111 1111
Name
0Bh, 8Bh, INTCON 10Bh,18Bh 0Ch 8Ch 13h 93h 14h 94h 86h Legend: Note 1: PIR1 PIE1 SSPBUF SSPADD SSPCON SSPSTAT TRISB
SSPIF CCP1IF TMR2IF TMR1IF SSPIE CCP1IE TMR2IE TMR1IE
Synchronous Serial Port Receive Buffer/Transmit Register Synchronous Serial Port (I2CTM mode) Address Register WCOL SMP
(1)
SSPOV CKE
(1)
SSPEN D/A
CKP P
SSPM3 SSPM2 SSPM1 SSPM0 S R/W UA BF
PORTB Data Direction Register
x = unknown, u = unchanged, - = unimplemented locations read as `0'. Shaded cells are not used by SSP module in SPITM mode. Maintain these bits clear in I2C mode.
2004 Microchip Technology Inc.
DS39598E-page 79
PIC16F818/819
NOTES:
DS39598E-page 80
2004 Microchip Technology Inc.
PIC16F818/819
11.0 ANALOG-TO-DIGITAL CONVERTER (A/D) MODULE
The A/D module has four registers: * * * * A/D Result High Register (ADRESH) A/D Result Low Register (ADRESL) A/D Control Register 0 (ADCON0) A/D Control Register 1 (ADCON1)
The Analog-to-Digital (A/D) converter module has five inputs for 18/20 pin devices. The conversion of an analog input signal results in a corresponding 10-bit digital number. The A/D module has a high and low-voltage reference input that is software selectable to some combination of VDD, VSS, RA2 or RA3. The A/D converter has a unique feature of being able to operate while the device is in Sleep mode. To operate in Sleep, the A/D conversion clock must be derived from the A/D's internal RC oscillator.
The ADCON0 register, shown in Register 11-1, controls the operation of the A/D module. The ADCON1 register, shown in Register 11-2, configures the functions of the port pins. The port pins can be configured as analog inputs (RA3 can also be a voltage reference) or as digital I/Os. Additional information on using the A/D module can be found in the "PICmicro(R) Mid-Range MCU Family Reference Manual" (DS33023).
REGISTER 11-1:
ADCON0: A/D CONTROL REGISTER 0 (ADDRESS 1Fh)
R/W-0 ADCS1 bit 7 R/W-0 ADCS0 R/W-0 CHS2 R/W-0 CHS1 R/W-0 CHS0 R/W-0 GO/DONE U-0 -- R/W-0 ADON bit 0
bit 7-6
ADCS1:ADCS0: A/D Conversion Clock Select bits If ADCS2 = 0: 00 = FOSC/2 01 = FOSC/8 10 = FOSC/32 11 = FRC (clock derived from the internal A/D module RC oscillator) If ADCS2 = 1: 00 = FOSC/4 01 = FOSC/16 10 = FOSC/64 11 = FRC (clock derived from the internal A/D module RC oscillator) CHS2:CHS0: Analog Channel Select bits 000 = Channel 0 (RA0/AN0) 001 = Channel 1 (RA1/AN1) 010 = Channel 2 (RA2/AN2) 011 = Channel 3 (RA3/AN3) 100 = Channel 4 (RA4/AN4) GO/DONE: A/D Conversion Status bit If ADON = 1: 1 = A/D conversion in progress (setting this bit starts the A/D conversion) 0 = A/D conversion not in progress (this bit is automatically cleared by hardware when the A/D conversion is complete) Unimplemented: Read as `0' ADON: A/D On bit 1 = A/D converter module is operating 0 = A/D converter module is shut-off and consumes no operating current Legend: R = Readable bit -n = Value at POR W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown
bit 5-3
bit 2
bit 1 bit 0
2003 Microchip Technology Inc.
DS39598D-page 81
PIC16F818/819
REGISTER 11-2: ADCON1: A/D CONTROL REGISTER 1 (ADDRESS 9Fh)
R/W-0 ADFM bit 7 bit 7 ADFM: A/D Result Format Select bit 1 = Right justified, 6 Most Significant bits of ADRESH are read as `0' 0 = Left justified, 6 Least Significant bits of ADRESL are read as `0' ADCS2: A/D Clock Divide by 2 Select bit 1 = A/D clock source is divided by 2 when system clock is used 0 = Disabled Unimplemented: Read as `0' PCFG<3:0>: A/D Port Configuration Control bits PCFG 0000 0001 0010 0011 0100 0101 011x 1000 1001 1010 1011 1100 1101 1110 1111 AN4 A A A A D D D A A A A A D D D AN3 A VREF+ A VREF+ A VREF+ D VREF+ A VREF+ VREF+ VREF+ VREF+ D VREF+ AN2 A A A A D D D VREFA A VREFVREFVREFD VREFAN1 A A A A A A D A A A A A A D D AN0 A A A A A A D A A A A A A A A VREF+ AVDD AN3 AVDD AN3 AVDD AN3 AVDD AN3 AVDD AN3 AN3 AN3 AN3 AVDD AN3 VREFAVSS AVSS AVSS AVSS AVSS AVSS AVSS AN2 AVSS AVSS AN2 AN2 AN2 AVSS AN2 C/R 5/0 4/1 5/0 4/1 3/0 2/1 0/0 3/2 5/0 4/1 3/2 3/2 2/2 1/0 1/2 R/W-0 ADCS2 U-0 -- U-0 -- R/W-0 PCFG3 R/W-0 PCFG2 R/W-0 PCFG1 R/W-0 PCFG0 bit 0
bit 6
bit 5-4 bit 3-0
A = Analog input D = Digital I/O C/R = Number of analog input channels/Number of A/D voltage references Legend: R = Readable bit -n = Value at POR W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown
DS39598D-page 82
2003 Microchip Technology Inc.
PIC16F818/819
The ADRESH:ADRESL registers contain the result of the A/D conversion. When the A/D conversion is complete, the result is loaded into the A/D Result register pair, the GO/DONE bit (ADCON0<2>) is cleared and A/D Interrupt Flag bit, ADIF, is set. The block diagram of the A/D module is shown in Figure 11-1. After the A/D module has been configured as desired, the selected channel must be acquired before the conversion is started. The analog input channels must have their corresponding TRIS bits selected as inputs. To determine sample time, see Section 11.1 "A/D Acquisition Requirements". After this sample time has elapsed, the A/D conversion can be started. 3. 4. 5. These steps should be followed for doing an A/D conversion: 1. Configure the A/D module: * Configure analog pins/voltage reference and digital I/O (ADCON1) * Select A/D input channel (ADCON0) * Select A/D conversion clock (ADCON0) * Turn on A/D module (ADCON0) Configure A/D interrupt (if desired): * Clear ADIF bit * Set ADIE bit * Set GIE bit Wait the required acquisition time. Start conversion: * Set GO/DONE bit (ADCON0) Wait for A/D conversion to complete by either: * Polling for the GO/DONE bit to be cleared (with interrupts disabled); OR * Waiting for the A/D interrupt Read A/D Result register pair (ADRESH:ADRESL), clear bit ADIF if required. For next conversion, go to step 1 or step 2 as required. The A/D conversion time per bit is defined as TAD. A minimum wait of 2 TAD is required before the next acquisition starts.
2.
6. 7.
FIGURE 11-1:
A/D BLOCK DIAGRAM
CHS<3:0>
100 RA4/AN4/T0CKI 011 RA3/AN3/VREF+ 010 VIN (Input Voltage) AVDD A/D Converter VREF+ (Reference Voltage) PCFG<3:0> 001 RA1/AN1 000 RA0/AN0 RA2/AN2/VREF-
VREF(Reference Voltage) AVSS PCFG<3:0>
2003 Microchip Technology Inc.
DS39598D-page 83
PIC16F818/819
11.1 A/D Acquisition Requirements
For the A/D converter to meet its specified accuracy, the charge holding capacitor (CHOLD) must be allowed to fully charge to the input channel voltage level. The analog input model is shown in Figure 11-2. The source impedance (RS) and the internal sampling switch (RSS) impedance directly affect the time required to charge the capacitor CHOLD. The sampling switch (RSS) impedance varies over the device voltage (VDD), see Figure 11-2. The maximum recommended impedance for analog sources is 2.5 k. As the impedance is decreased, the acquisition time may be decreased. After the analog input channel is selected (changed), this acquisition must be done before the conversion can be started. To calculate the minimum acquisition time, Equation 11-1 may be used. This equation assumes that 1/2 LSb error is used (1024 steps for the A/D). The 1/2 LSb error is the maximum error allowed for the A/D to meet its specified resolution. To calculate the minimum acquisition time, TACQ, see the "PICmicro(R) Mid-Range MCU Family Reference Manual" (DS33023).
EQUATION 11-1:
TACQ
ACQUISITION TIME
= Amplifier Settling Time + Hold Capacitor Charging Time + Temperature Coefficient = = = = = = = TAMP + TC + TCOFF 2 s + TC + [(Temperature - 25C)(0.05 s/C)] CHOLD (RIC + RSS + RS) In(1/2047) -120 pF (1 k + 7 k + 10 k) In(0.0004885) 16.47 s 2 s + 16.47 s + [(50C - 25C)(0.05 s/C) 19.72 s
TC
TACQ
Note 1: The reference voltage (VREF) has no effect on the equation since it cancels itself out. 2: The charge holding capacitor (CHOLD) is not discharged after each conversion. 3: The maximum recommended impedance for analog sources is 10 k. This is required to meet the pin leakage specification. 4: After a conversion has completed, a 2.0 TAD delay must complete before acquisition can begin again. During this time, the holding capacitor is not connected to the selected A/D input channel.
FIGURE 11-2:
ANALOG INPUT MODEL
VDD RS VA ANx CPIN 5 pF VT = 0.6V Sampling Switch RIC 1K SS RSS ILEAKAGE 500 nA CHOLD = DAC Capacitance = 120 pF VSS
VT = 0.6V
Legend: CPIN = input capacitance VT = threshold voltage ILEAKAGE = leakage current at the pin due to various junctions RIC = interconnect resistance SS = sampling switch CHOLD = sample/hold capacitance (from DAC)
6V 5V VDD 4V 3V 2V 5 6 7 8 9 10 11 Sampling Switch (k)
DS39598D-page 84
2003 Microchip Technology Inc.
PIC16F818/819
11.2 Selecting the A/D Conversion Clock 11.3 Configuring Analog Port Pins
The ADCON1 and TRISA registers control the operation of the A/D port pins. The port pins that are desired as analog inputs must have their corresponding TRIS bits set (input). If the TRIS bit is cleared (output), the digital output level (VOH or VOL) will be converted. The A/D operation is independent of the state of the CHS<2:0> bits and the TRIS bits. Note 1: When reading the Port register, all pins configured as analog input channels will read as cleared (a low level). Pins configured as digital inputs will convert an analog input. Analog levels on a digitally configured input will not affect the conversion accuracy. 2: Analog levels on any pin that is defined as a digital input (including the AN4:AN0 pins) may cause the input buffer to consume current out of the device specification.
The A/D conversion time per bit is defined as TAD. The A/D conversion requires 9.0 TAD per 10-bit conversion. The source of the A/D conversion clock is software selectable. The seven possible options for TAD are: * * * * * * * 2 TOSC 4 TOSC 8 TOSC 16 TOSC 32 TOSC 64 TOSC Internal A/D module RC oscillator (2-6 s)
For correct A/D conversions, the A/D conversion clock (TAD) must be selected to ensure a minimum TAD time as small as possible, but no less than 1.6 s and not greater than 6.4 s. Table 11-1 shows the resultant TAD times derived from the device operating frequencies and the A/D clock source selected.
TABLE 11-1:
TAD vs. MAXIMUM DEVICE OPERATING FREQUENCIES (STANDARD DEVICES (F))
AD Clock Source (TAD) Maximum Device Frequency
Operation 2 TOSC 4 TOSC 8 TOSC 16 TOSC 32 TOSC 64 TOSC RC Note 1: 2: 3:
(1,2,3)
ADCS<2> 0 1 0 1 0 1 X
ADCS<1:0> 00 00 01 01 10 10 11 1.25 MHz 2.5 MHz 5 MHz 10 MHz 20 MHz 20 MHz (Note 1)
The RC source has a typical TAD time of 4 s but can vary between 2-6 s. When the device frequencies are greater than 1 MHz, the RC A/D conversion clock source is only recommended for Sleep operation. For extended voltage devices (LF), please refer to Section 15.0 "Electrical Characteristics".
2003 Microchip Technology Inc.
DS39598D-page 85
PIC16F818/819
11.4 A/D Conversions
11.4.1 A/D RESULT REGISTERS
Clearing the GO/DONE bit during a conversion will abort the current conversion. The A/D Result register pair will NOT be updated with the partially completed A/D conversion sample. That is, the ADRESH:ADRESL registers will continue to contain the value of the last completed conversion (or the last value written to the ADRESH:ADRESL registers). After the A/D conversion is aborted, a 2-TAD wait is required before the next acquisition is started. After this 2-TAD wait, acquisition on the selected channel is automatically started. The GO/DONE bit can then be set to start the conversion. In Figure 11-3, after the GO bit is set, the first time segment has a minimum of TCY and a maximum of TAD. Note: The GO/DONE bit should NOT be set in the same instruction that turns on the A/D. The ADRESH:ADRESL register pair is the location where the 10-bit A/D result is loaded at the completion of the A/D conversion. This register pair is 16 bits wide. The A/D module gives the flexibility to left or right justify the 10-bit result in the 16-bit result register. The A/D Format Select bit (ADFM) controls this justification. Figure 11-4 shows the operation of the A/D result justification. The extra bits are loaded with `0's. When an A/D result will not overwrite these locations (A/D disable), these registers may be used as two general purpose 8-bit registers.
FIGURE 11-3:
A/D CONVERSION TAD CYCLES
TAD2 b9 Conversion starts TAD3 b8 TAD4 b7 TAD5 b6 TAD6 b5 TAD7 b4 TAD8 b3 TAD9 TAD10 TAD11 b2 b1 b0
TCY to TAD TAD1
Holding Capacitor is disconnected from analog input (typically 100 ns) Set GO bit
ADRES is loaded, GO bit is cleared, ADIF bit is set, Holding Capacitor is connected to analog input
FIGURE 11-4:
A/D RESULT JUSTIFICATION
10-bit Result ADFM = 1 ADFM = 0
7 0000 00
2107
0
7
0765 0000 00
0
ADRESH
ADRESL 10-bit Result
ADRESH 10-bit Result
ADRESL
Right Justified
Left Justified
DS39598D-page 86
2003 Microchip Technology Inc.
PIC16F818/819
11.5 A/D Operation During Sleep 11.6 Effects of a Reset
The A/D module can operate during Sleep mode. This requires that the A/D clock source be set to RC (ADCS1:ADCS0 = 11). When the RC clock source is selected, the A/D module waits one instruction cycle before starting the conversion. This allows the SLEEP instruction to be executed which eliminates all digital switching noise from the conversion. When the conversion is completed, the GO/DONE bit will be cleared and the result loaded into the ADRES register. If the A/D interrupt is enabled, the device will wake-up from Sleep. If the A/D interrupt is not enabled, the A/D module will then be turned off, although the ADON bit will remain set. When the A/D clock source is another clock option (not RC), a SLEEP instruction will cause the present conversion to be aborted and the A/D module to be turned off, though the ADON bit will remain set. Turning off the A/D places the A/D module in its lowest current consumption state. Note: For the A/D module to operate in Sleep, the A/D clock source must be set to RC (ADCS1:ADCS0 = 11). To perform an A/D conversion in Sleep, ensure the SLEEP instruction immediately follows the instruction that sets the GO/DONE bit. A device Reset forces all registers to their Reset state. The A/D module is disabled and any conversion in progress is aborted. All A/D input pins are configured as analog inputs. The value that is in the ADRESH:ADRESL registers is not modified for a Power-on Reset. The ADRESH:ADRESL registers will contain unknown data after a Power-on Reset.
11.7
Use of the CCP Trigger
An A/D conversion can be started by the "special event trigger" of the CCP module. This requires that the CCP1M3:CCP1M0 bits (CCP1CON<3:0>) be programmed as `1011' and that the A/D module is enabled (ADON bit is set). When the trigger occurs, the GO/DONE bit will be set, starting the A/D conversion and the Timer1 counter will be reset to zero. Timer1 is reset to automatically repeat the A/D acquisition period with minimal software overhead (moving the ADRESH:ADRESL to the desired location). The appropriate analog input channel must be selected and the minimum acquisition done before the "special event trigger" sets the GO/DONE bit (starts a conversion). If the A/D module is not enabled (ADON is cleared), then the "special event trigger" will be ignored by the A/D module but will still reset the Timer1 counter.
TABLE 11-2:
Address
REGISTERS/BITS ASSOCIATED WITH A/D
Bit 7 GIE -- -- Bit 6 PEIE ADIF ADIE Bit 5 TMR0IE -- -- Bit 4 INTE -- -- Bit 3 RBIE SSPIF SSPIE Bit 2 TMR0IF CCP1IF CCP1IE Bit 1 INTF Bit 0 RBIF Value on POR, BOR 0000 000x Value on all other Resets 0000 000u -0-- 0000 -0-- 0000 uuuu uuuu uuuu uuuu 0000 00-0 00-- 0000 uuu0 0000 1111 1111
Name
0Bh,8Bh INTCON 10Bh,18Bh 0Ch 8Ch 1Eh 9Eh 1Fh 9Fh 05h 85h Legend: PIR1 PIE1 ADRESH ADRESL ADCON1 PORTA TRISA
TMR2IF TMR1IF -0-- 0000 TMR2IE TMR1IE -0-- 0000 xxxx xxxx xxxx xxxx
A/D Result Register High Byte A/D Result Register Low Byte CHS2 -- RA5 CHS1 -- RA4 CHS0 GO/DONE PCFG3 RA3 PCFG2 RA2 -- PCFG1 RA1 ADON PCFG0 RA0 ADFM RA7 ADCS2 RA6
ADCON0 ADCS1 ADCS0
0000 00-0 00-- 0000 xxx0 0000 1111 1111
TRISA7 TRISA6 TRISA5 PORTA Data Direction Register
x = unknown, u = unchanged, - = unimplemented, read as `0'. Shaded cells are not used for A/D conversion.
2003 Microchip Technology Inc.
DS39598D-page 87
PIC16F818/819
NOTES:
DS39598D-page 88
2003 Microchip Technology Inc.
PIC16F818/819
12.0 SPECIAL FEATURES OF THE CPU
Sleep mode is designed to offer a very low-current power-down mode. The user can wake-up from Sleep through external Reset, Watchdog Timer wake-up or through an interrupt. Several oscillator options are also made available to allow the part to fit the application. The RC oscillator option saves system cost while the LP crystal option saves power. Configuration bits are used to select the desired oscillator mode. Additional information on special features is available in the "PICmicro(R) Mid-Range MCU Family Reference Manual" (DS33023).
These devices have a host of features intended to maximize system reliability, minimize cost through elimination of external components, provide power-saving operating modes and offer code protection: * Reset - Power-on Reset (POR) - Power-up Timer (PWRT) - Oscillator Start-up Timer (OST) - Brown-out Reset (BOR) * Interrupts * Watchdog Timer (WDT) * Sleep * Code Protection * ID Locations * In-Circuit Serial Programming There are two timers that offer necessary delays on power-up. One is the Oscillator Start-up Timer (OST), intended to keep the chip in Reset until the crystal oscillator is stable. The other is the Power-up Timer (PWRT) which provides a fixed delay of 72 ms (nominal) on power-up only. It is designed to keep the part in Reset while the power supply stabilizes and is enabled or disabled using a configuration bit. With these two timers on-chip, most applications need no external Reset circuitry.
12.1
Configuration Bits
The configuration bits can be programmed (read as `0'), or left unprogrammed (read as `1'), to select various device configurations. These bits are mapped in program memory location 2007h. The user will note that address 2007h is beyond the user program memory space which can be accessed only during programming.
2004 Microchip Technology Inc.
DS39598E-page 89
PIC16F818/819
REGISTER 12-1:
R/P-1 R/P-1
CONFIGURATION WORD (ADDRESS 2007h)(1)
R/P-1 R/P-1 R/P-1 R/P-1 R/P-1 R/P-1 R/P-1 R/P-1 R/P-1 R/P-1 R/P-1 LVP BOREN MCLRE FOSC2 PWRTEN WDTEN FOSC1 FOSC0 bit 0
R/P-1
CP CCPMX DEBUG WRT1 WRT0 CPD bit 13 bit 13
bit 12
bit 11
bit 10-9
bit 8
bit 7
bit 6
bit 5
bit 3
bit 2
bit 4, 1-0
CP: Flash Program Memory Code Protection bit 1 = Code protection off 0 = All memory locations code-protected CCPMX: CCP1 Pin Selection bit 1 = CCP1 function on RB2 0 = CCP1 function on RB3 DEBUG: In-Circuit Debugger Mode bit 1 = In-Circuit Debugger disabled, RB6 and RB7 are general purpose I/O pins 0 = In-Circuit Debugger enabled, RB6 and RB7 are dedicated to the debugger WRT1:WRT0: Flash Program Memory Write Enable bits For PIC16F818: 11 = Write protection off 10 = 000h to 01FF write-protected, 0200 to 03FF may be modified by EECON control 01 = 000h to 03FF write-protected For PIC16F819: 11 = Write protection off 10 = 0000h to 01FFh write-protected, 0200h to 07FFh may be modified by EECON control 01 = 0000h to 03FFh write-protected, 0400h to 07FFh may be modified by EECON control 00 = 0000h to 05FFh write-protected, 0600h to 07FFh may be modified by EECON control CPD: Data EE Memory Code Protection bit 1 = Code protection off 0 = Data EE memory locations code-protected LVP: Low-Voltage Programming Enable bit 1 = RB3/PGM pin has PGM function, Low-Voltage Programming enabled 0 = RB3/PGM pin has digital I/O function, HV on MCLR must be used for programming BOREN: Brown-out Reset Enable bit 1 = BOR enabled 0 = BOR disabled MCLRE: RA5/MCLR/VPP Pin Function Select bit 1 = RA5/MCLR/VPP pin function is MCLR 0 = RA5/MCLR/VPP pin function is digital I/O, MCLR internally tied to VDD PWRTEN: Power-up Timer Enable bit 1 = PWRT disabled 0 = PWRT enabled WDTEN: Watchdog Timer Enable bit 1 = WDT enabled 0 = WDT disabled FOSC2:FOSC0: Oscillator Selection bits 111 = EXTRC oscillator; CLKO function on RA6/OSC2/CLKO pin 110 = EXTRC oscillator; port I/O function on RA6/OSC2/CLKO pin 101 = INTRC oscillator; CLKO function on RA6/OSC2/CLKO pin and port I/O function on RA7/OSC1/CLKI pin 100 = INTRC oscillator; port I/O function on both RA6/OSC2/CLKO pin and RA7/OSC1/CLKI pin 011 = EXTCLK; port I/O function on RA6/OSC2/CLKO pin 010 = HS oscillator 001 = XT oscillator 000 = LP oscillator Note 1: The erased (unprogrammed) value of the Configuration Word is 3FFFh. Legend: R = Readable bit P = Programmable bit -n = Value when device is unprogrammed
U = Unimplemented bit, read as `1' u = Unchanged from programmed state
DS39598E-page 90
2004 Microchip Technology Inc.
PIC16F818/819
12.2 Reset
The PIC16F818/819 differentiates between various kinds of Reset: * * * * * * Power-on Reset (POR) MCLR Reset during normal operation MCLR Reset during Sleep WDT Reset during normal operation WDT wake-up during Sleep Brown-out Reset (BOR) Some registers are not affected in any Reset condition. Their status is unknown on POR and unchanged in any other Reset. Most other registers are reset to a "Reset state" on Power-on Reset (POR), on the MCLR and WDT Reset, on MCLR Reset during Sleep and Brownout Reset (BOR). They are not affected by a WDT wake-up which is viewed as the resumption of normal operation. The TO and PD bits are set or cleared differently in different Reset situations as indicated in Table 12-3. These bits are used in software to determine the nature of the Reset. Upon a POR, BOR or wake-up from Sleep, the CPU requires approximately 5-10 s to become ready for code execution. This delay runs in parallel with any other timers. See Table 12-4 for a full description of Reset states of all registers. A simplified block diagram of the on-chip Reset circuit is shown in Figure 12-1.
FIGURE 12-1:
SIMPLIFIED BLOCK DIAGRAM OF ON-CHIP RESET CIRCUIT
External Reset
MCLR WDT Module VDD Rise Detect VDD Brown-out Reset BOREN OST/PWRT OST 10-bit Ripple Counter OSC1 R Q Chip_Reset Power-on Reset S WDT Sleep
Time-out Reset
PWRT INTRC 31.25 kHz 10-bit Ripple Counter
Enable PWRT Enable OST
2004 Microchip Technology Inc.
DS39598E-page 91
PIC16F818/819
12.3 MCLR 12.5 Power-up Timer (PWRT)
PIC16F818/819 device has a noise filter in the MCLR Reset path. The filter will detect and ignore small pulses. It should be noted that a WDT Reset does not drive MCLR pin low. The behavior of the ESD protection on the MCLR pin has been altered from previous devices of this family. Voltages applied to the pin that exceed its specification can result in both MCLR and excessive current beyond the device specification during the ESD event. For this reason, Microchip recommends that the MCLR pin no longer be tied directly to VDD. The use of an RC network, as shown in Figure 12-2, is suggested. The RA5/MCLR/VPP pin can be configured for MCLR (default) or as an I/O pin (RA5). This is configured through the MCLRE bit in the Configuration Word register. The Power-up Timer (PWRT) of the PIC16F818/819 is a counter that uses the INTRC oscillator as the clock input. This yields a count of 72 ms. While the PWRT is counting, the device is held in Reset. The power-up time delay depends on the INTRC and will vary from chip-to-chip due to temperature and process variation. See DC parameter #33 for details. The PWRT is enabled by clearing configuration bit, PWRTEN.
12.6
Oscillator Start-up Timer (OST)
The Oscillator Start-up Timer (OST) provides 1024 oscillator cycles (from OSC1 input) delay after the PWRT delay is over (if enabled). This helps to ensure that the crystal oscillator or resonator has started and stabilized. The OST time-out is invoked only for XT, LP and HS modes and only on Power-on Reset or wake-up from Sleep.
FIGURE 12-2:
VDD
RECOMMENDED MCLR CIRCUIT
PIC16F818/819
12.7
Brown-out Reset (BOR)
R1 1 k (or greater) MCLR C1 0.1 F (optional, not critical)
The configuration bit, BOREN, can enable or disable the Brown-out Reset circuit. If VDD falls below VBOR (parameter #D005, about 4V) for longer than TBOR (parameter #35, about 100 s), the brown-out situation will reset the device. If VDD falls below VBOR for less than TBOR, a Reset may not occur. Once the brown-out occurs, the device will remain in Brown-out Reset until VDD rises above VBOR. The Power-up Timer (if enabled) will keep the device in Reset for TPWRT (parameter #33, about 72 ms). If VDD should fall below VBOR during TPWRT, the Brown-out Reset process will restart when VDD rises above VBOR with the Power-up Timer Reset. Unlike previous PIC16 devices, the PWRT is no longer automatically enabled when the Brown-out Reset circuit is enabled. The PWRTEN and BOREN configuration bits are independent of each other.
12.4
Power-on Reset (POR)
A Power-on Reset pulse is generated on-chip when VDD rise is detected (in the range of 1.2V-1.7V). To take advantage of the POR, tie the MCLR pin to VDD as described in Section 12.3 "MCLR". A maximum rise time for VDD is specified. See Section 15.0 "Electrical Characteristics" for details. When the device starts normal operation (exits the Reset condition), device operating parameters (voltage, frequency, temperature, ...) must be met to ensure operation. If these conditions are not met, the device must be held in Reset until the operating conditions are met. For more information, see Application Note AN607, "Power-up Trouble Shooting" (DS00607).
12.8
Time-out Sequence
On power-up, the time-out sequence is as follows: the PWRT delay starts (if enabled) when a POR occurs. Then, OST starts counting 1024 oscillator cycles when PWRT ends (LP, XT, HS). When the OST ends, the device comes out of Reset. If MCLR is kept low long enough, all delays will expire. Bringing MCLR high will begin execution immediately. This is useful for testing purposes or to synchronize more than one PIC16F818/819 device operating in parallel. Table 12-3 shows the Reset conditions for the Status, PCON and PC registers, while Table 12-4 shows the Reset conditions for all the registers.
DS39598E-page 92
2004 Microchip Technology Inc.
PIC16F818/819
12.9 Power Control/Status Register (PCON)
bit BOR cleared, indicating a Brown-out Reset occurred. When the Brown-out Reset is disabled, the state of the BOR bit is unpredictable. Bit 1 is Power-on Reset Status bit, POR. It is cleared on a Power-on Reset and unaffected otherwise. The user must set this bit following a Power-on Reset.
The Power Control/Status register, PCON, has two bits to indicate the type of Reset that last occurred. Bit 0 is Brown-out Reset Status bit, BOR. Bit BOR is unknown on a Power-on Reset. It must then be set by the user and checked on subsequent Resets to see if
TABLE 12-1:
TIME-OUT IN VARIOUS SITUATIONS
Power-up PWRTE = 0 TPWRT PWRTE = 1 5-10 s(1) Brown-out Reset PWRTE = 0 TPWRT PWRTE = 1 5-10 s(1) Wake-up from Sleep 1024 * TOSC 5-10 s(1)
Oscillator Configuration XT, HS, LP EXTRC, EXTCLK, INTRC Note 1:
TPWRT + 1024 * TOSC 1024 * TOSC TPWRT + 1024 * TOSC 1024 * TOSC
CPU start-up is always invoked on POR, BOR and wake-up from Sleep.
TABLE 12-2:
POR 0 0 0 1 1 1 1 1
STATUS BITS AND THEIR SIGNIFICANCE
BOR x x x 0 1 1 1 1 TO 1 0 x 1 0 0 u 1 PD 1 x 0 1 1 0 u 0 Power-on Reset Illegal, TO is set on POR Illegal, PD is set on POR Brown-out Reset WDT Reset WDT wake-up MCLR Reset during normal operation MCLR Reset during Sleep or interrupt wake-up from Sleep
Legend: u = unchanged, x = unknown
TABLE 12-3:
RESET CONDITION FOR SPECIAL REGISTERS
Condition Program Counter 000h 000h 000h 000h PC + 1 000h PC + 1(1) Status Register 0001 1xxx 000u uuuu 0001 0uuu 0000 1uuu uuu0 0uuu 0001 1uuu uuu1 0uuu PCON Register ---- --0x ---- --uu ---- --uu ---- --uu ---- --uu ---- --u0 ---- --uu
Power-on Reset MCLR Reset during normal operation MCLR Reset during Sleep WDT Reset WDT wake-up Brown-out Reset Interrupt wake-up from Sleep
Legend: u = unchanged, x = unknown, - = unimplemented bit, read as `0' Note 1: When the wake-up is due to an interrupt and the GIE bit is set, the PC is loaded with the interrupt vector (0004h).
2004 Microchip Technology Inc.
DS39598E-page 93
PIC16F818/819
TABLE 12-4:
Register
INITIALIZATION CONDITIONS FOR ALL REGISTERS
Power-on Reset, Brown-out Reset MCLR Reset, WDT Reset Wake-up via WDT or Interrupt
W xxxx xxxx uuuu uuuu uuuu uuuu INDF N/A N/A N/A TMR0 xxxx xxxx uuuu uuuu uuuu uuuu PCL 0000h 0000h PC + 1(2) (3) STATUS 0001 1xxx 000q quuu uuuq quuu(3) FSR xxxx xxxx uuuu uuuu uuuu uuuu PORTA xxx0 0000 uuu0 0000 uuuu uuuu PORTB xxxx xxxx uuuu uuuu uuuu uuuu PCLATH ---0 0000 ---0 0000 ---u uuuu INTCON 0000 000x 0000 000u uuuu uuuu(1) PIR1 -0-- 0000 -0-- 0000 -u-- uuuu(1) PIR2 ---0 ------0 ------u ----(1) TMR1L xxxx xxxx uuuu uuuu uuuu uuuu TMR1H xxxx xxxx uuuu uuuu uuuu uuuu T1CON --00 0000 --uu uuuu --uu uuuu TMR2 0000 0000 0000 0000 uuuu uuuu T2CON -000 0000 -000 0000 -uuu uuuu SSPBUF xxxx xxxx uuuu uuuu uuuu uuuu SSPCON 0000 0000 0000 0000 uuuu uuuu CCPR1L xxxx xxxx uuuu uuuu uuuu uuuu CCPR1H xxxx xxxx uuuu uuuu uuuu uuuu CCP1CON --00 0000 --00 0000 --uu uuuu ADRESH xxxx xxxx uuuu uuuu uuuu uuuu ADCON0 0000 00-0 0000 00-0 uuuu uu-u OPTION_REG 1111 1111 1111 1111 uuuu uuuu TRISA 1111 1111 1111 1111 uuuu uuuu TRISB 1111 1111 1111 1111 uuuu uuuu PIE1 -0-- 0000 -0-- 0000 -u-- uuuu PIE2 ---0 ------0 ------u ---PCON ---- --qq ---- --uu ---- --uu OSCCON -000 -0--000 -0--uuu -u-OSCTUNE --00 0000 --00 0000 --uu uuuu PR2 1111 1111 1111 1111 1111 1111 SSPADD 0000 0000 0000 0000 uuuu uuuu SSPSTAT 0000 0000 0000 0000 uuuu uuuu ADRESL xxxx xxxx uuuu uuuu uuuu uuuu ADCON1 00-- 0000 00-- 0000 uu-- uuuu EEDATA xxxx xxxx uuuu uuuu uuuu uuuu EEADR xxxx xxxx uuuu uuuu uuuu uuuu EEDATH --xx xxxx --uu uuuu --uu uuuu EEADRH ---- -xxx ---- -uuu ---- -uuu EECON1 x--x x000 u--x u000 u--u uuuu EECON2 ---- ------- ------- ---Legend: u = unchanged, x = unknown, - = unimplemented bit, read as `0', q = value depends on condition, r = reserved, maintain clear Note 1: One or more bits in INTCON, PIR1 and PR2 will be affected (to cause wake-up). 2: When the wake-up is due to an interrupt and the GIE bit is set, the PC is loaded with the interrupt vector (0004h). 3: See Table 12-3 for Reset value for specific conditions.
DS39598E-page 94
2004 Microchip Technology Inc.
PIC16F818/819
FIGURE 12-3: TIME-OUT SEQUENCE ON POWER-UP (MCLR TIED TO VDD THROUGH PULL-UP RESISTOR)
VDD
MCLR Internal POR TPWRT
PWRT Time-out
TOST
OST Time-out
Internal Reset
FIGURE 12-4:
TIME-OUT SEQUENCE ON POWER-UP (MCLR TIED TO VDD THROUGH RC NETWORK): CASE 1
VDD
MCLR Internal POR TPWRT
PWRT Time-out
TOST
OST Time-out
Internal Reset
FIGURE 12-5:
TIME-OUT SEQUENCE ON POWER-UP (MCLR TIED TO VDD THROUGH RC NETWORK): CASE 2
VDD
MCLR Internal POR TPWRT
PWRT Time-out
TOST
OST Time-out
Internal Reset
2004 Microchip Technology Inc.
DS39598E-page 95
PIC16F818/819
FIGURE 12-6: SLOW RISE TIME (MCLR TIED TO VDD THROUGH RC NETWORK)
5V VDD MCLR Internal POR TPWRT PWRT Time-out TOST OST Time-out Internal Reset 0V 1V
12.10 Interrupts
The PIC16F818/819 has up to nine sources of interrupt. The Interrupt Control register (INTCON) records individual interrupt requests in flag bits. It also has individual and global interrupt enable bits. Note: Individual interrupt flag bits are set regardless of the status of their corresponding mask bit or the GIE bit.
The RB0/INT pin interrupt, the RB port change interrupt and the TMR0 overflow interrupt flags are contained in the INTCON register. The peripheral interrupt flags are contained in the Special Function Register, PIR1. The corresponding interrupt enable bits are contained in Special Function Register, PIE1 and the peripheral interrupt enable bit is contained in Special Function Register, INTCON. When an interrupt is serviced, the GIE bit is cleared to disable any further interrupt, the return address is pushed onto the stack and the PC is loaded with 0004h. Once in the Interrupt Service Routine, the source(s) of the interrupt can be determined by polling the interrupt flag bits. The interrupt flag bit(s) must be cleared in software before re-enabling interrupts to avoid recursive interrupts. For external interrupt events, such as the INT pin or PORTB change interrupt, the interrupt latency will be three or four instruction cycles. The exact latency depends on when the interrupt event occurs relative to the current Q cycle. The latency is the same for one or two-cycle instructions. Individual interrupt flag bits are set regardless of the status of their corresponding mask bit, PEIE bit or the GIE bit.
A Global Interrupt Enable bit, GIE (INTCON<7>), enables (if set) all unmasked interrupts or disables (if cleared) all interrupts. When bit GIE is enabled and an interrupt's flag bit and mask bit are set, the interrupt will vector immediately. Individual interrupts can be disabled through their corresponding enable bits in various registers. Individual interrupt bits are set regardless of the status of the GIE bit. The GIE bit is cleared on Reset. The "return from interrupt" instruction, RETFIE, exits the interrupt routine, as well as sets the GIE bit, which re-enables interrupts.
FIGURE 12-7:
EEIF EEIE ADIF ADIE
INTERRUPT LOGIC
TMR0IF TMR0IE INTF INTE SSPIF SSPIE CCP1IF CCP1IE TMR1IF TMR1IE RBIF RBIE PEIE GIE Wake-up (if in Sleep mode)
Interrupt to CPU
TMR2IF TMR2IE
DS39598E-page 96
2004 Microchip Technology Inc.
PIC16F818/819
12.10.1 INT INTERRUPT 12.10.3 PORTB INTCON CHANGE
External interrupt on the RB0/INT pin is edge triggered, either rising if bit INTEDG (OPTION_REG<6>) is set, or falling if the INTEDG bit is clear. When a valid edge appears on the RB0/INT pin, flag bit, INTF (INTCON<1>), is set. This interrupt can be disabled by clearing enable bit, INTE (INTCON<4>). Flag bit INTF must be cleared in software in the Interrupt Service Routine before re-enabling this interrupt. The INT interrupt can wake-up the processor from Sleep if bit INTE was set prior to going into Sleep. The status of Global Interrupt Enable bit, GIE, decides whether or not the processor branches to the interrupt vector following wake-up. See Section 12.13 "Power-Down Mode (Sleep)" for details on Sleep mode. An input change on PORTB<7:4> sets flag bit, RBIF (INTCON<0>). The interrupt can be enabled/disabled by setting/clearing enable bit, RBIE (INTCON<3>). See Section 3.2 "EECON1 and EECON2 Registers".
12.11 Context Saving During Interrupts
During an interrupt, only the return PC value is saved on the stack. Typically, users may wish to save key registers during an interrupt (i.e., W, Status registers). This will have to be implemented in software as shown in Example 12-1. For PIC16F818 devices, the upper 64 bytes of each bank are common. Temporary holding registers, W_TEMP and STATUS_TEMP, should be placed here. These 64 locations do not require banking and therefore, make it easier for context save and restore. For PIC16F819 devices, the upper 16 bytes of each bank are common.
12.10.2
TMR0 INTERRUPT
An overflow (FFh 00h) in the TMR0 register will set flag bit, TMR0IF (INTCON<2>). The interrupt can be enabled/disabled by setting/clearing enable bit, TMR0IE (INTCON<5>) (see Section 6.0 "Timer0 Module").
EXAMPLE 12-1:
MOVWF SWAPF CLRF MOVWF : :(ISR) : SWAPF MOVWF SWAPF SWAPF
SAVING STATUS AND W REGISTERS IN RAM
;Copy ;Swap ;bank ;Save W to TEMP register status to be saved into W 0, regardless of current bank, Clears IRP,RP1,RP0 status to bank zero STATUS_TEMP register
W_TEMP STATUS, W STATUS STATUS_TEMP
;Insert user code here STATUS_TEMP, W STATUS W_TEMP, F W_TEMP, W ;Swap STATUS_TEMP register into W ;(sets bank to original state) ;Move W into STATUS register ;Swap W_TEMP ;Swap W_TEMP into W
2004 Microchip Technology Inc.
DS39598E-page 97
PIC16F818/819
12.12 Watchdog Timer (WDT)
For PIC16F818/819 devices, the WDT is driven by the INTRC oscillator. When the WDT is enabled, the INTRC (31.25 kHz) oscillator is enabled. The nominal WDT period is 16 ms and has the same accuracy as the INTRC oscillator. During normal operation, a WDT time-out generates a device Reset (Watchdog Timer Reset). If the device is in Sleep mode, a WDT time-out causes the device to wake-up and continue with normal operation (Watchdog Timer wake-up). The TO bit in the Status register will be cleared upon a Watchdog Timer time-out. The WDT can be permanently disabled by clearing configuration bit, WDTEN (see Section 12.1 "Configuration Bits"). WDT time-out period values may be found in Section 15.0 "Electrical Characteristics" under parameter #31. Values for the WDT prescaler (actually a postscaler but shared with the Timer0 prescaler) may be assigned using the OPTION_REG register. Note 1: The CLRWDT and SLEEP instructions clear the WDT and the postscaler if assigned to the WDT and prevent it from timing out and generating a device Reset condition. 2: When a CLRWDT instruction is executed and the prescaler is assigned to the WDT, the prescaler count will be cleared but the prescaler assignment is not changed.
FIGURE 12-8:
WATCHDOG TIMER BLOCK DIAGRAM
From TMR0 Clock Source (Figure 6-1) 0 INTRC 31.25 kHz 1 M U X Postscaler 8 8-to-1 MUX WDT Enable Bit PSA To TMR0 (Figure 6-1) PS2:PS0
0 MUX
1 PSA
WDT Time-out Note: PSA and PS2:PS0 are bits in the OPTION_REG register.
TABLE 12-5:
Address
SUMMARY OF WATCHDOG TIMER REGISTERS
Name
(1)
Bit 7 RBPU LVP
Bit 6 INTEDG BOREN
Bit 5 T0CS MCLRE
Bit 4 T0SE FOSC2
Bit 3 PSA PWRTEN
Bit 2 PS2 WDTEN
Bit 1 PS1 FOSC1
Bit 0 PS0 FOSC0
81h,181h OPTION_REG 2007h Configuration bits
Legend: Shaded cells are not used by the Watchdog Timer. Note 1: See Register 12-1 for operation of these bits.
DS39598E-page 98
2004 Microchip Technology Inc.
PIC16F818/819
12.13 Power-Down Mode (Sleep)
Power-Down mode is entered by executing a SLEEP instruction. If enabled, the Watchdog Timer will be cleared but keeps running, the PD bit (Status<3>) is cleared, the TO (Status<4>) bit is set and the oscillator driver is turned off. The I/O ports maintain the status they had before the SLEEP instruction was executed (driving high, low or high-impedance). For lowest current consumption in this mode, place all I/O pins at either VDD or VSS, ensure no external circuitry is drawing current from the I/O pin, power-down the A/D and disable external clocks. Pull all I/O pins that are high-impedance inputs, high or low externally, to avoid switching currents caused by floating inputs. The T0CKI input should also be at VDD or VSS for lowest current consumption. The contribution from on-chip pull-ups on PORTB should also be considered. The MCLR pin must be at a logic high level (VIHMC). Other peripherals cannot generate interrupts since during Sleep, no on-chip clocks are present. When the SLEEP instruction is being executed, the next instruction (PC + 1) is prefetched. For the device to wake-up through an interrupt event, the corresponding interrupt enable bit must be set (enabled). Wake-up occurs regardless of the state of the GIE bit. If the GIE bit is clear (disabled), the device continues execution at the instruction after the SLEEP instruction. If the GIE bit is set (enabled), the device executes the instruction after the SLEEP instruction and then branches to the interrupt address (0004h). In cases where the execution of the instruction following SLEEP is not desirable, the user should have a NOP after the SLEEP instruction.
12.13.2
WAKE-UP USING INTERRUPTS
When global interrupts are disabled (GIE cleared) and any interrupt source has both its interrupt enable bit and interrupt flag bit set, one of the following will occur: * If the interrupt occurs before the execution of a SLEEP instruction, the SLEEP instruction will complete as a NOP. Therefore, the WDT and WDT postscaler will not be cleared, the TO bit will not be set and PD bit will not be cleared. * If the interrupt occurs during or after the execution of a SLEEP instruction, the device will immediately wake-up from Sleep. The SLEEP instruction will be completely executed before the wake-up. Therefore, the WDT and WDT postscaler will be cleared, the TO bit will be set and the PD bit will be cleared. Even if the flag bits were checked before executing a SLEEP instruction, it may be possible for flag bits to become set before the SLEEP instruction completes. To determine whether a SLEEP instruction executed, test the PD bit. If the PD bit is set, the SLEEP instruction was executed as a NOP. To ensure that the WDT is cleared, a CLRWDT instruction should be executed before a SLEEP instruction.
12.13.1
WAKE-UP FROM SLEEP
The device can wake-up from Sleep through one of the following events: 1. 2. 3. External Reset input on MCLR pin. Watchdog Timer wake-up (if WDT was enabled). Interrupt from INT pin, RB port change or a peripheral interrupt.
External MCLR Reset will cause a device Reset. All other events are considered a continuation of program execution and cause a "wake-up". The TO and PD bits in the Status register can be used to determine the cause of the device Reset. The PD bit, which is set on power-up, is cleared when Sleep is invoked. The TO bit is cleared if a WDT time-out occurred and caused wake-up. The following peripheral interrupts can wake the device from Sleep: 1. 2. 3. 4. 5. 6. 7. TMR1 interrupt. Timer1 must be operating as an asynchronous counter. CCP Capture mode interrupt. Special event trigger (Timer1 in Asynchronous mode using an external clock). SSP (Start/Stop) bit detect interrupt. SSP transmit or receive in Slave mode (SPI/I2C). A/D conversion (when A/D clock source is RC). EEPROM write operation completion.
2004 Microchip Technology Inc.
DS39598E-page 99
PIC16F818/819
FIGURE 12-9:
OSC1 CLKO(4) INT pin INTF Flag (INTCON<1>) GIE bit (INTCON<7>) INSTRUCTION FLOW PC PC Instruction Inst(PC) = Sleep Fetched Instruction Inst(PC - 1) Executed PC + 1 Inst(PC + 1) Sleep PC + 2 PC + 2 Inst(PC + 2) Inst(PC + 1) Dummy Cycle PC + 2 0004h Inst(0004h) Dummy Cycle 0005h Inst(0005h) Inst(0004h) Processor in Sleep Interrupt Latency (Note 2) TOST(2)
WAKE-UP FROM SLEEP THROUGH INTERRUPT
Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4
Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 Q1
Note
1: 2: 3: 4:
XT, HS or LP Oscillator mode assumed. TOST = 1024 TOSC (drawing not to scale). This delay will not be there for RC Oscillator mode. GIE = 1 assumed. In this case, after wake-up, the processor jumps to the interrupt routine. If GIE = 0, execution will continue in-line. CLKO is not available in these oscillator modes but shown here for timing reference.
12.14 In-Circuit Debugger
When the DEBUG bit in the Configuration Word is programmed to a `0', the In-Circuit Debugger functionality is enabled. This function allows simple debugging functions when used with MPLAB(R) ICD. When the microcontroller has this feature enabled, some of the resources are not available for general use. Table 12-6 shows which features are consumed by the background debugger.
12.15 Program Verification/Code Protection
If the code protection bit(s) have not been programmed, the on-chip program memory can be read out for verification purposes.
12.16 ID Locations
Four memory locations (2000h-2003h) are designated as ID locations, where the user can store checksum or other code identification numbers. These locations are not accessible during normal execution but are readable and writable during program/verify. It is recommended that only the four Least Significant bits of the ID location are used.
TABLE 12-6:
I/O pins Stack
DEBUGGER RESOURCES
RB6, RB7 1 level Address 0000h must be NOP Last 100h words 0x070 (0x0F0, 0x170, 0x1F0) 0x1EB-0x1EF
Program Memory Data Memory
To use the In-Circuit Debugger function of the microcontroller, the design must implement In-Circuit Serial Programming connections to MCLR/VPP, VDD, GND, RB7 and RB6. This will interface to the in-circuit debugger module available from Microchip or one of the third party development tool companies.
DS39598E-page 100
2004 Microchip Technology Inc.
PIC16F818/819
12.17 In-Circuit Serial Programming
PIC16F818/819 microcontrollers can be serially programmed while in the end application circuit. This is simply done with two lines for clock and data and three other lines for power, ground and the programming voltage (see Figure 12-10 for an example). This allows customers to manufacture boards with unprogrammed devices and then program the microcontroller just before shipping the product. This also allows the most recent firmware or a custom firmware to be programmed. For more information on serial programming, please refer to the "PIC16F818/819 Flash Memory Programming Specification" (DS39603). Note: The Timer1 oscillator shares the T1OSI and T1OSO pins with the PGD and PGC pins used for programming and debugging. When using the Timer1 oscillator, In-Circuit Serial ProgrammingTM (ICSPTM) may not function correctly (high voltage or low voltage) or the In-Circuit Debugger (ICD) may not communicate with the controller. As a result of using either ICSP or ICD, the Timer1 crystal may be damaged. If ICSP or ICD operations are required, the crystal should be disconnected from the circuit (disconnect either lead) or installed after programming. The oscillator loading capacitors may remain in-circuit during ICSP or ICD operation.
FIGURE 12-10:
TYPICAL IN-CIRCUIT SERIAL PROGRAMMING CONNECTION
To Normal Connections
External Connector Signals +5V 0V VPP CLK Data I/O RB3/PGM
*
PIC16F818/819 VDD VSS MCLR/VPP RB6 RB7 RB3
*
*
*
VDD
To Normal Connections * Isolation devices (as required). RB3 only used in LVP mode.
2004 Microchip Technology Inc.
DS39598E-page 101
PIC16F818/819
12.18 Low-Voltage ICSP Programming
The LVP bit of the Configuration Word register enables Low-Voltage ICSP Programming. This mode allows the microcontroller to be programmed via ICSP using a VDD source in the operating voltage range. This only means that VPP does not have to be brought to VIHH but can instead be left at the normal operating voltage. In this mode, the RB3/PGM pin is dedicated to the programming function and ceases to be a general purpose I/O pin. If Low-Voltage Programming mode is not used, the LVP bit can be programmed to a `0' and RB3/PGM becomes a digital I/O pin. However, the LVP bit may only be programmed when Programming mode is entered with VIHH on MCLR. The LVP bit can only be changed when using high voltage on MCLR. It should be noted that once the LVP bit is programmed to `0', only the High-Voltage Programming mode is available and only this mode can be used to program the device. When using Low-Voltage ICSP, the part must be supplied at 4.5V to 5.5V if a bulk erase will be executed. This includes reprogramming of the code-protect bits from an ON state to an OFF state. For all other cases of Low-Voltage ICSP, the part may be programmed at the normal operating voltage. This means calibration values, unique user IDs or user code can be reprogrammed or added. The following LVP steps assume the LVP bit is set in the Configuration Word register. 1. 2. 3. 4. 5. Apply VDD to the VDD pin. Drive MCLR low. Apply VDD to the RB3/PGM pin. Apply VDD to the MCLR pin. Follow with the associated programming steps. Note 1: The High-Voltage Programming mode is always available, regardless of the state of the LVP bit, by applying VIHH to the MCLR pin. 2: While in Low-Voltage ICSP mode (LVP = 1), the RB3 pin can no longer be used as a general purpose I/O pin. 3: When using Low-Voltage ICSP Programming (LVP) and the pull-ups on PORTB are enabled, bit 3 in the TRISB register must be cleared to disable the pull-up on RB3 and ensure the proper operation of the device. 4: RB3 should not be allowed to float if LVP is enabled. An external pull-down device should be used to default the device to normal operating mode. If RB3 floats high, the PIC16F818/819 device will enter Programming mode. 5: LVP mode is enabled by default on all devices shipped from Microchip. It can be disabled by clearing the LVP bit in the Configuration Word register. 6: Disabling LVP will provide maximum compatibility to other PIC16CXXX devices.
DS39598E-page 102
2004 Microchip Technology Inc.
PIC16F818/819
13.0 INSTRUCTION SET SUMMARY
The PIC16 instruction set is highly orthogonal and is comprised of three basic categories: * Byte-oriented operations * Bit-oriented operations * Literal and control operations Each PIC16 instruction is a 14-bit word divided into an opcode, which specifies the instruction type and one or more operands, which further specify the operation of the instruction. The formats for each of the categories are presented in Figure 13-1, while the various opcode fields are summarized in Table 13-1. Table 13-2 lists the instructions recognized by the MPASMTM assembler. A complete description of each instruction is also available in the "PICmicro(R) Mid-Range MCU Family Reference Manual" (DS33023). For byte-oriented instructions, `f' represents a file register designator and `d' represents a destination designator. The file register designator specifies which file register is to be used by the instruction. The destination designator specifies where the result of the operation is to be placed. If `d' is zero, the result is placed in the W register. If `d' is one, the result is placed in the file register specified in the instruction. For bit-oriented instructions, `b' represents a bit field designator, which selects the bit affected by the operation, while `f' represents the address of the file in which the bit is located. For literal and control operations, `k' represents an eight or eleven-bit constant or literal value One instruction cycle consists of four oscillator periods. For an oscillator frequency of 4 MHz, this gives a normal instruction execution time of 1 s. All instructions are executed within a single instruction cycle, unless a conditional test is true, or the program counter is changed as a result of an instruction. When this occurs, the execution takes two instruction cycles, with the second cycle executed as a NOP. Note: To maintain upward compatibility with future PIC16F818/819 products, do not use the OPTION and TRIS instructions. For example, a "CLRF PORTB" instruction will read PORTB, clear all the data bits, then write the result back to PORTB. This example would have the unintended result that the condition that sets the RBIF flag would be cleared.
TABLE 13-1:
Field
f W b k x
OPCODE FIELD DESCRIPTIONS
Description
Register file address (0x00 to 0x7F) Working register (accumulator) Bit address within an 8-bit file register Literal field, constant data or label Don't care location (= 0 or 1). The assembler will generate code with x = 0. It is the recommended form of use for compatibility with all Microchip software tools. Destination select; d = 0: store result in W, d = 1: store result in file register f. Default is d = 1. Program Counter Time-out bit Power-Down bit
d
PC TO PD
FIGURE 13-1:
GENERAL FORMAT FOR INSTRUCTIONS
0
Byte-oriented file register operations 13 876 OPCODE d f (FILE #) d = 0 for destination W d = 1 for destination f f = 7-bit file register address Bit-oriented file register operations 13 10 9 76 OPCODE b (BIT #) f (FILE #) b = 3-bit bit address f = 7-bit file register address Literal and control operations General 13 OPCODE k = 8-bit immediate value CALL and GOTO instructions only 13 11 OPCODE 10 k (literal) 8 7 k (literal)
0
All instruction examples use the format `0xhh' to represent a hexadecimal number, where `h' signifies a hexadecimal digit.
0
13.1
READ-MODIFY-WRITE OPERATIONS
Any instruction that specifies a file register as part of the instruction performs a Read-Modify-Write (R-M-W) operation. The register is read, the data is modified and the result is stored according to either the instruction or the destination designator `d'. A read operation is performed on a register even if the instruction writes to that register.
2004 Microchip Technology Inc.
0
k = 11-bit immediate value
DS39598E-page 103
PIC16F818/819
TABLE 13-2:
Mnemonic, Operands
PIC16F818/819 INSTRUCTION SET
Description Cycles 14-Bit Opcode MSb LSb Status Affected Notes
BYTE-ORIENTED FILE REGISTER OPERATIONS ADDWF ANDWF CLRF CLRW COMF DECF DECFSZ INCF INCFSZ IORWF MOVF MOVWF NOP RLF RRF SUBWF SWAPF XORWF BCF BSF BTFSC BTFSS ADDLW ANDLW CALL CLRWDT GOTO IORLW MOVLW RETFIE RETLW RETURN SLEEP SUBLW XORLW Note 1: f, d f, d f f, d f, d f, d f, d f, d f, d f, d f f, d f, d f, d f, d f, d f, b f, b f, b f, b k k k k k k k k k Add W and f AND W with f Clear f Clear W Complement f Decrement f Decrement f, Skip if 0 Increment f Increment f, Skip if 0 Inclusive OR W with f Move f Move W to f No Operation Rotate Left f through Carry Rotate Right f through Carry Subtract W from f Swap nibbles in f Exclusive OR W with f Bit Clear f Bit Set f Bit Test f, Skip if Clear Bit Test f, Skip if Set Add literal and W AND literal with W Call subroutine Clear Watchdog Timer Go to address Inclusive OR literal with W Move literal to W Return from interrupt Return with literal in W Return from Subroutine Go into Standby mode Subtract W from literal Exclusive OR literal with W 1 1 1 1 1 1 1 (2) 1 1 (2) 1 1 1 1 1 1 1 1 1 1 1 1 (2) 1 (2) 1 1 2 1 2 1 1 2 2 2 1 1 1 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 01 01 01 0111 0101 0001 0001 1001 0011 1011 1010 1111 0100 1000 0000 0000 1101 1100 0010 1110 0110 00bb 01bb 10bb 11bb dfff dfff lfff 0xxx dfff dfff dfff dfff dfff dfff dfff lfff 0xx0 dfff dfff dfff dfff dfff bfff bfff bfff bfff ffff ffff ffff xxxx ffff ffff ffff ffff ffff ffff ffff ffff 0000 ffff ffff ffff ffff ffff ffff ffff ffff ffff C, DC, Z Z TO, PD Z C, DC, Z Z Z Z Z Z Z Z Z 1, 2 1, 2 2 1, 2 1, 2 1, 2, 3 1, 2 1, 2, 3 1, 2 1, 2
C C C, DC, Z Z
1, 2 1, 2 1, 2 1, 2 1, 2 1, 2 1, 2 3 3
BIT-ORIENTED FILE REGISTER OPERATIONS
LITERAL AND CONTROL OPERATIONS 11 11 10 00 10 11 11 00 11 00 00 11 11 111x 1001 0kkk 0000 1kkk 1000 00xx 0000 01xx 0000 0000 110x 1010 kkkk kkkk kkkk 0110 kkkk kkkk kkkk 0000 kkkk 0000 0110 kkkk kkkk kkkk kkkk kkkk 0100 kkkk kkkk kkkk 1001 kkkk 1000 0011 kkkk kkkk
TO, PD C, DC, Z Z
2: 3:
When an I/O register is modified as a function of itself ( e.g., MOVF PORTB, 1), the value used will be that value present on the pins themselves. For example, if the data latch is `1' for a pin configured as input and is driven low by an external device, the data will be written back with a `0'. If this instruction is executed on the TMR0 register (and where applicable, d = 1), the prescaler will be cleared if assigned to the Timer0 module. If the Program Counter (PC) is modified or a conditional test is true, the instruction requires two cycles. The second cycle is executed as a NOP.
Note:
Additional information on the mid-range instruction set is available in the "PICmicro(R) Mid-Range MCU Family Reference Manual" (DS33023).
DS39598E-page 104
2004 Microchip Technology Inc.
PIC16F818/819
13.2
ADDLW Syntax: Operands: Operation: Status Affected: Description:
Instruction Descriptions
Add Literal and W [ label ] ADDLW 0 k 255 (W) + k (W) C, DC, Z The contents of the W register are added to the eight-bit literal `k' and the result is placed in the W register. Operation: Status Affected: Description: k ANDWF Syntax: Operands: AND W with f [ label ] ANDWF 0 f 127 d [0,1] (W) .AND. (f) (destination) Z AND the W register with register `f'. If `d' = 0, the result is stored in the W register. If `d' = 1, the result is stored back in register `f'. f,d
ADDWF Syntax: Operands: Operation: Status Affected: Description:
Add W and f [ label ] ADDWF 0 f 127 d [0,1] (W) + (f) (destination) C, DC, Z Add the contents of the W register with register `f'. If `d' = 0, the result is stored in the W register. If `d' = 1, the result is stored back in register `f'. f,d
BCF Syntax: Operands: Operation: Status Affected: Description:
Bit Clear f [ label ] BCF 0 f 127 0b7 0 (f) None Bit `b' in register `f' is cleared. f,b
ANDLW Syntax: Operands: Operation: Status Affected: Description:
AND Literal with W [ label ] ANDLW 0 k 255 (W) .AND. (k) (W) Z The contents of W register are ANDed with the eight-bit literal `k'. The result is placed in the W register. k
BSF Syntax: Operands: Operation: Status Affected: Description:
Bit Set f [ label ] BSF 0 f 127 0b7 1 (f) None Bit `b' in register `f' is set. f,b
2004 Microchip Technology Inc.
DS39598E-page 105
PIC16F818/819
BTFSS Syntax: Operands: Operation: Status Affected: Description: Bit Test f, Skip if Set [ label ] BTFSS f,b 0 f 127 0b<7 skip if (f) = 1 None If bit `b' in register `f' = 0, the next instruction is executed. If bit `b' = 1, then the next instruction is discarded and a NOP is executed instead, making this a 2 TCY instruction. Status Affected: Description: CLRF Syntax: Operands: Operation: Clear f [ label ] CLRF 0 f 127 00h (f) 1Z Z The contents of register `f' are cleared and the Z bit is set. f
BTFSC Syntax: Operands: Operation: Status Affected: Description:
Bit Test, Skip if Clear [ label ] BTFSC f,b 0 f 127 0b7 skip if (f) = 0 None If bit `b' in register `f' = 1, the next instruction is executed. If bit `b' in register `f' = 0, the next instruction is discarded and a NOP is executed instead, making this a 2 TCY instruction.
CLRW Syntax: Operands: Operation: Status Affected: Description:
Clear W [ label ] CLRW None 00h (W) 1Z Z W register is cleared. Zero bit (Z) is set.
CALL Syntax: Operands: Operation:
Call Subroutine [ label ] CALL k 0 k 2047 (PC) + 1 TOS, k PC<10:0>, (PCLATH<4:3>) PC<12:11> None Call subroutine. First, return address (PC + 1) is pushed onto the stack. The eleven-bit immediate address is loaded into PC bits<10:0>. The upper bits of the PC are loaded from PCLATH. CALL is a two-cycle instruction.
CLRWDT Syntax: Operands: Operation:
Clear Watchdog Timer [ label ] CLRWDT None 00h WDT 0 WDT prescaler, 1 TO 1 PD TO, PD CLRWDT instruction resets the Watchdog Timer. It also resets the prescaler of the WDT. Status bits TO and PD are set.
Status Affected: Description:
Status Affected: Description:
DS39598E-page 106
2004 Microchip Technology Inc.
PIC16F818/819
COMF Syntax: Operands: Operation: Status Affected: Description: Complement f [ label ] COMF 0 f 127 d [0,1] (f) (destination) Z The contents of register `f' are complemented. If `d' = 0, the result is stored in W. If `d' = 1, the result is stored back in register `f'. Status Affected: Description: f,d GOTO Syntax: Operands: Operation: Unconditional Branch [ label ] GOTO k 0 k 2047 k PC<10:0> PCLATH<4:3> PC<12:11> None GOTO is an unconditional branch. The eleven-bit immediate value is loaded into PC bits<10:0>. The upper bits of PC are loaded from PCLATH<4:3>. GOTO is a two-cycle instruction.
DECF Syntax: Operands: Operation: Status Affected: Description:
Decrement f [ label ] DECF f,d 0 f 127 d [0,1] (f) - 1 (destination) Z Decrement register `f'. If `d' = 0, the result is stored in the W register. If `d' = 1, the result is stored back in register `f'.
INCF Syntax: Operands: Operation: Status Affected: Description:
Increment f [ label ] INCF f,d 0 f 127 d [0,1] (f) + 1 (destination) Z The contents of register `f' are incremented. If `d' = 0, the result is placed in the W register. If `d' = 1, the result is placed back in register `f'.
DECFSZ Syntax: Operands: Operation: Status Affected: Description:
Decrement f, Skip if 0 [ label ] DECFSZ f,d 0 f 127 d [0,1] (f) - 1 (destination); skip if result = 0 None The contents of register `f' are decremented. If `d' = 0, the result is placed in the W register. If `d' = 1, the result is placed back in register `f'. If the result is `1', the next instruction is executed. If the result is `0', then a NOP is executed instead, making it a 2 TCY instruction.
INCFSZ Syntax: Operands: Operation: Status Affected: Description:
Increment f, Skip if 0 [ label ] INCFSZ f,d 0 f 127 d [0,1] (f) + 1 (destination), skip if result = 0 None The contents of register `f' are incremented. If `d' = 0, the result is placed in the W register. If `d' = 1, the result is placed back in register `f'. If the result is `1', the next instruction is executed. If the result is `0', a NOP is executed instead, making it a 2 TCY instruction.
2004 Microchip Technology Inc.
DS39598E-page 107
PIC16F818/819
IORLW Syntax: Operands: Operation: Status Affected: Description: Inclusive OR Literal with W [ label ] IORLW k 0 k 255 (W) .OR. k (W) Z The contents of the W register are ORed with the eight-bit literal `k'. The result is placed in the W register. MOVLW Syntax: Operands: Operation: Status Affected: Description: Move Literal to W [ label ] k (W) None The eight-bit literal `k' is loaded into W register. The don't cares will assemble as `0's. MOVLW k 0 k 255
IORWF Syntax: Operands: Operation: Status Affected: Description:
Inclusive OR W with f [ label ] IORWF f,d 0 f 127 d [0,1] (W) .OR. (f) (destination) Z Inclusive OR the W register with register `f'. If `d' = 0, the result is placed in the W register. If `d' = 1, the result is placed back in register `f'.
MOVWF Syntax: Operands: Operation: Status Affected: Description:
Move W to f [ label ] (W) (f) None Move data from W register to register `f'. MOVWF f 0 f 127
MOVF Syntax: Operands: Operation: Status Affected: Description:
Move f [ label ] MOVF f,d 0 f 127 d [0,1] (f) (destination) Z The contents of register `f' are moved to a destination dependant upon the status of `d'. If `d' = 0, the destination is W register. If `d' = 1, the destination is file register `f' itself. `d' = 1 is useful to test a file register since status flag Z is affected.
NOP Syntax: Operands: Operation: Status Affected: Description:
No Operation [ label ] None No operation None No operation. NOP
DS39598E-page 108
2004 Microchip Technology Inc.
PIC16F818/819
RETFIE Syntax: Operands: Operation: Status Affected: Return from Interrupt [ label ] None TOS PC, 1 GIE None RETFIE RLF Syntax: Operands: Operation: Status Affected: Description: Rotate Left f through Carry [ label ] RLF f,d 0 f 127 d [0,1] See description below C The contents of register `f' are rotated one bit to the left through the Carry flag. If `d' = 0, the result is placed in the W register. If `d' = 1, the result is stored back in register `f'.
C Register f
RETLW Syntax: Operands: Operation: Status Affected: Description:
Return with Literal in W [ label ] RETLW k 0 k 255 k (W); TOS PC None The W register is loaded with the eight-bit literal `k'. The program counter is loaded from the top of the stack (the return address). This is a two-cycle instruction.
RRF Syntax: Operands: Operation: Status Affected: Description:
Rotate Right f through Carry [ label ] RRF f,d 0 f 127 d [0,1] See description below C The contents of register `f' are rotated one bit to the right through the Carry flag. If `d' = 0, the result is placed in the W register. If `d' = 1, the result is placed back in register `f'.
C Register f
RETURN Syntax: Operands: Operation: Status Affected: Description:
Return from Subroutine [ label ] None TOS PC None Return from subroutine. The stack is POPed and the top of the stack (TOS) is loaded into the program counter. This is a two-cycle instruction. RETURN
SLEEP Syntax: Operands: Operation:
Enter Sleep mode [ label ] None 00h WDT, 0 WDT prescaler, 1 TO, 0 PD TO, PD The Power-Down status bit, PD, is cleared. Time-out status bit, TO, is set. Watchdog Timer and its prescaler are cleared. The processor is put into Sleep mode with the oscillator stopped. SLEEP
Status Affected: Description:
2004 Microchip Technology Inc.
DS39598E-page 109
PIC16F818/819
SUBLW Syntax: Operands: Operation: Description: Subtract W from Literal [ label ] SUBLW k 0 k 255 k - (W) (W) The W register is subtracted (2's complement method) from the eight-bit literal `k'. The result is placed in the W register. XORLW Syntax: Operands: Operation: Status Affected: Description: Exclusive OR Literal with W [ label ] XORLW k
0 k 255 (W) .XOR. k (W) Z The contents of the W register are XORed with the eight-bit literal `k'. The result is placed in the W register.
Status Affected: C, DC, Z
SUBWF Syntax: Operands: Operation: Description:
Subtract W from f [ label ] SUBWF f,d 0 f 127 d [0,1] (f) - (W) (destination) Subtract (2's complement method) W register from register `f'. If `d' = 0, the result is stored in the W register. If `d' = 1, the result is stored back in register `f'.
XORWF Syntax: Operands: Operation: Status Affected: Description:
Exclusive OR W with f [ label ] XORWF 0 f 127 d [0,1] (W) .XOR. (f) (destination) Z Exclusive OR the contents of the W register with register `f'. If `d' = 0, the result is stored in the W register. If `d' = 1, the result is stored back in register `f'. f,d
Status Affected: C, DC, Z
SWAPF Syntax: Operands: Operation: Status Affected: Description:
Swap Nibbles in f [ label ] SWAPF f,d 0 f 127 d [0,1] (f<3:0>) (destination<7:4>), (f<7:4>) (destination<3:0>) None The upper and lower nibbles of register `f' are exchanged. If `d' = 0, the result is placed in W register. If `d' = 1, the result is placed in register `f'.
DS39598E-page 110
2004 Microchip Technology Inc.
PIC16F818/819
14.0 DEVELOPMENT SUPPORT
14.1
The PICmicro(R) microcontrollers are supported with a full range of hardware and software development tools: * Integrated Development Environment - MPLAB(R) IDE Software * Assemblers/Compilers/Linkers - MPASMTM Assembler - MPLAB C17 and MPLAB C18 C Compilers - MPLINKTM Object Linker/ MPLIBTM Object Librarian - MPLAB C30 C Compiler - MPLAB ASM30 Assembler/Linker/Library * Simulators - MPLAB SIM Software Simulator - MPLAB dsPIC30 Software Simulator * Emulators - MPLAB ICE 2000 In-Circuit Emulator - MPLAB ICE 4000 In-Circuit Emulator * In-Circuit Debugger - MPLAB ICD 2 * Device Programmers - PRO MATE(R) II Universal Device Programmer - PICSTART(R) Plus Development Programmer - MPLAB PM3 Device Programmer * Low-Cost Demonstration Boards - PICDEMTM 1 Demonstration Board - PICDEM.netTM Demonstration Board - PICDEM 2 Plus Demonstration Board - PICDEM 3 Demonstration Board - PICDEM 4 Demonstration Board - PICDEM 17 Demonstration Board - PICDEM 18R Demonstration Board - PICDEM LIN Demonstration Board - PICDEM USB Demonstration Board * Evaluation Kits - KEELOQ(R) Evaluation and Programming Tools - PICDEM MSC - microID(R) Developer Kits - CAN - PowerSmart(R) Developer Kits - Analog
MPLAB Integrated Development Environment Software
The MPLAB IDE software brings an ease of software development previously unseen in the 8/16-bit microcontroller market. The MPLAB IDE is a Windows(R) based application that contains: * An interface to debugging tools - simulator - programmer (sold separately) - emulator (sold separately) - in-circuit debugger (sold separately) * A full-featured editor with color coded context * A multiple project manager * Customizable data windows with direct edit of contents * High-level source code debugging * Mouse over variable inspection * Extensive on-line help The MPLAB IDE allows you to: * Edit your source files (either assembly or C) * One touch assemble (or compile) and download to PICmicro emulator and simulator tools (automatically updates all project information) * Debug using: - source files (assembly or C) - mixed assembly and C - machine code MPLAB IDE supports multiple debugging tools in a single development paradigm, from the cost effective simulators, through low-cost in-circuit debuggers, to full-featured emulators. This eliminates the learning curve when upgrading to tools with increasing flexibility and power.
14.2
MPASM Assembler
The MPASM assembler is a full-featured, universal macro assembler for all PICmicro MCUs. The MPASM assembler generates relocatable object files for the MPLINK object linker, Intel(R) standard HEX files, MAP files to detail memory usage and symbol reference, absolute LST files that contain source lines and generated machine code and COFF files for debugging. The MPASM assembler features include: * Integration into MPLAB IDE projects * User defined macros to streamline assembly code * Conditional assembly for multi-purpose source files * Directives that allow complete control over the assembly process
2003 Microchip Technology Inc.
DS39598D-page 111
PIC16F818/819
14.3 MPLAB C17 and MPLAB C18 C Compilers 14.6 MPLAB ASM30 Assembler, Linker and Librarian
The MPLAB C17 and MPLAB C18 Code Development Systems are complete ANSI C compilers for Microchip's PIC17CXXX and PIC18CXXX family of microcontrollers. These compilers provide powerful integration capabilities, superior code optimization and ease of use not found with other compilers. For easy source level debugging, the compilers provide symbol information that is optimized to the MPLAB IDE debugger.
MPLAB ASM30 assembler produces relocatable machine code from symbolic assembly language for dsPIC30F devices. MPLAB C30 compiler uses the assembler to produce it's object file. The assembler generates relocatable object files that can then be archived or linked with other relocatable object files and archives to create an executable file. Notable features of the assembler include: * * * * * * Support for the entire dsPIC30F instruction set Support for fixed-point and floating-point data Command line interface Rich directive set Flexible macro language MPLAB IDE compatibility
14.4
MPLINK Object Linker/ MPLIB Object Librarian
The MPLINK object linker combines relocatable objects created by the MPASM assembler and the MPLAB C17 and MPLAB C18 C compilers. It can link relocatable objects from precompiled libraries, using directives from a linker script. The MPLIB object librarian manages the creation and modification of library files of precompiled code. When a routine from a library is called from a source file, only the modules that contain that routine will be linked in with the application. This allows large libraries to be used efficiently in many different applications. The object linker/library features include: * Efficient linking of single libraries instead of many smaller files * Enhanced code maintainability by grouping related modules together * Flexible creation of libraries with easy module listing, replacement, deletion and extraction
14.7
MPLAB SIM Software Simulator
The MPLAB SIM software simulator allows code development in a PC hosted environment by simulating the PICmicro series microcontrollers on an instruction level. On any given instruction, the data areas can be examined or modified and stimuli can be applied from a file, or user defined key press, to any pin. The execution can be performed in Single-Step, Execute Until Break or Trace mode. The MPLAB SIM simulator fully supports symbolic debugging using the MPLAB C17 and MPLAB C18 C Compilers, as well as the MPASM assembler. The software simulator offers the flexibility to develop and debug code outside of the laboratory environment, making it an excellent, economical software development tool.
14.5
MPLAB C30 C Compiler
14.8
MPLAB SIM30 Software Simulator
The MPLAB C30 C compiler is a full-featured, ANSI compliant, optimizing compiler that translates standard ANSI C programs into dsPIC30F assembly language source. The compiler also supports many command line options and language extensions to take full advantage of the dsPIC30F device hardware capabilities and afford fine control of the compiler code generator. MPLAB C30 is distributed with a complete ANSI C standard library. All library functions have been validated and conform to the ANSI C library standard. The library includes functions for string manipulation, dynamic memory allocation, data conversion, timekeeping and math functions (trigonometric, exponential and hyperbolic). The compiler provides symbolic information for high-level source debugging with the MPLAB IDE.
The MPLAB SIM30 software simulator allows code development in a PC hosted environment by simulating the dsPIC30F series microcontrollers on an instruction level. On any given instruction, the data areas can be examined or modified and stimuli can be applied from a file, or user defined key press, to any of the pins. The MPLAB SIM30 simulator fully supports symbolic debugging using the MPLAB C30 C Compiler and MPLAB ASM30 assembler. The simulator runs in either a Command Line mode for automated tasks, or from MPLAB IDE. This high-speed simulator is designed to debug, analyze and optimize time intensive DSP routines.
DS39598D-page 112
2003 Microchip Technology Inc.
PIC16F818/819
14.9 MPLAB ICE 2000 High-Performance Universal In-Circuit Emulator 14.11 MPLAB ICD 2 In-Circuit Debugger
Microchip's In-Circuit Debugger, MPLAB ICD 2, is a powerful, low-cost, run-time development tool, connecting to the host PC via an RS-232 or high-speed USB interface. This tool is based on the Flash PICmicro MCUs and can be used to develop for these and other PICmicro microcontrollers. The MPLAB ICD 2 utilizes the in-circuit debugging capability built into the Flash devices. This feature, along with Microchip's In-Circuit Serial ProgrammingTM (ICSPTM) protocol, offers cost effective in-circuit Flash debugging from the graphical user interface of the MPLAB Integrated Development Environment. This enables a designer to develop and debug source code by setting breakpoints, single-stepping and watching variables, CPU status and peripheral registers. Running at full speed enables testing hardware and applications in real-time. MPLAB ICD 2 also serves as a development programmer for selected PICmicro devices.
The MPLAB ICE 2000 universal in-circuit emulator is intended to provide the product development engineer with a complete microcontroller design tool set for PICmicro microcontrollers. Software control of the MPLAB ICE 2000 in-circuit emulator is advanced by the MPLAB Integrated Development Environment, which allows editing, building, downloading and source debugging from a single environment. The MPLAB ICE 2000 is a full-featured emulator system with enhanced trace, trigger and data monitoring features. Interchangeable processor modules allow the system to be easily reconfigured for emulation of different processors. The universal architecture of the MPLAB ICE in-circuit emulator allows expansion to support new PICmicro microcontrollers. The MPLAB ICE 2000 in-circuit emulator system has been designed as a real-time emulation system with advanced features that are typically found on more expensive development tools. The PC platform and Microsoft(R) Windows 32-bit operating system were chosen to best make these features available in a simple, unified application.
14.12 PRO MATE II Universal Device Programmer
The PRO MATE II is a universal, CE compliant device programmer with programmable voltage verification at VDDMIN and VDDMAX for maximum reliability. It features an LCD display for instructions and error messages and a modular detachable socket assembly to support various package types. In Stand-Alone mode, the PRO MATE II device programmer can read, verify and program PICmicro devices without a PC connection. It can also set code protection in this mode.
14.10 MPLAB ICE 4000 High-Performance Universal In-Circuit Emulator
The MPLAB ICE 4000 universal in-circuit emulator is intended to provide the product development engineer with a complete microcontroller design tool set for highend PICmicro microcontrollers. Software control of the MPLAB ICE in-circuit emulator is provided by the MPLAB Integrated Development Environment, which allows editing, building, downloading and source debugging from a single environment. The MPLAB ICD 4000 is a premium emulator system, providing the features of MPLAB ICE 2000, but with increased emulation memory and high-speed performance for dsPIC30F and PIC18XXXX devices. Its advanced emulator features include complex triggering and timing, up to 2 Mb of emulation memory and the ability to view variables in real-time. The MPLAB ICE 4000 in-circuit emulator system has been designed as a real-time emulation system with advanced features that are typically found on more expensive development tools. The PC platform and Microsoft Windows 32-bit operating system were chosen to best make these features available in a simple, unified application.
14.13 MPLAB PM3 Device Programmer
The MPLAB PM3 is a universal, CE compliant device programmer with programmable voltage verification at VDDMIN and VDDMAX for maximum reliability. It features a large LCD display (128 x 64) for menus and error messages and a modular detachable socket assembly to support various package types. The ICSPTM cable assembly is included as a standard item. In StandAlone mode, the MPLAB PM3 device programmer can read, verify and program PICmicro devices without a PC connection. It can also set code protection in this mode. MPLAB PM3 connects to the host PC via an RS232 or USB cable. MPLAB PM3 has high-speed communications and optimized algorithms for quick programming of large memory devices and incorporates an SD/MMC card for file storage and secure data applications.
2003 Microchip Technology Inc.
DS39598D-page 113
PIC16F818/819
14.14 PICSTART Plus Development Programmer
The PICSTART Plus development programmer is an easy-to-use, low-cost, prototype programmer. It connects to the PC via a COM (RS-232) port. MPLAB Integrated Development Environment software makes using the programmer simple and efficient. The PICSTART Plus development programmer supports most PICmicro devices up to 40 pins. Larger pin count devices, such as the PIC16C92X and PIC17C76X, may be supported with an adapter socket. The PICSTART Plus development programmer is CE compliant.
14.17 PICDEM 2 Plus Demonstration Board
The PICDEM 2 Plus demonstration board supports many 18, 28 and 40-pin microcontrollers, including PIC16F87X and PIC18FXX2 devices. All the necessary hardware and software is included to run the demonstration programs. The sample microcontrollers provided with the PICDEM 2 demonstration board can be programmed with a PRO MATE II device programmer, PICSTART Plus development programmer, or MPLAB ICD 2 with a Universal Programmer Adapter. The MPLAB ICD 2 and MPLAB ICE in-circuit emulators may also be used with the PICDEM 2 demonstration board to test firmware. A prototype area extends the circuitry for additional application components. Some of the features include an RS-232 interface, a 2 x 16 LCD display, a piezo speaker, an on-board temperature sensor, four LEDs and sample PIC18F452 and PIC16F877 Flash microcontrollers.
14.15 PICDEM 1 PICmicro Demonstration Board
The PICDEM 1 demonstration board demonstrates the capabilities of the PIC16C5X (PIC16C54 to PIC16C58A), PIC16C61, PIC16C62X, PIC16C71, PIC16C8X, PIC17C42, PIC17C43 and PIC17C44. All necessary hardware and software is included to run basic demo programs. The sample microcontrollers provided with the PICDEM 1 demonstration board can be programmed with a PRO MATE II device programmer or a PICSTART Plus development programmer. The PICDEM 1 demonstration board can be connected to the MPLAB ICE in-circuit emulator for testing. A prototype area extends the circuitry for additional application components. Features include an RS-232 interface, a potentiometer for simulated analog input, push button switches and eight LEDs.
14.18 PICDEM 3 PIC16C92X Demonstration Board
The PICDEM 3 demonstration board supports the PIC16C923 and PIC16C924 in the PLCC package. All the necessary hardware and software is included to run the demonstration programs.
14.19 PICDEM 4 8/14/18-Pin Demonstration Board
The PICDEM 4 can be used to demonstrate the capabilities of the 8, 14 and 18-pin PIC16XXXX and PIC18XXXX MCUs, including the PIC16F818/819, PIC16F87/88, PIC16F62XA and the PIC18F1320 family of microcontrollers. PICDEM 4 is intended to showcase the many features of these low pin count parts, including LIN and Motor Control using ECCP. Special provisions are made for low-power operation with the supercapacitor circuit and jumpers allow onboard hardware to be disabled to eliminate current draw in this mode. Included on the demo board are provisions for Crystal, RC or Canned Oscillator modes, a five volt regulator for use with a nine volt wall adapter or battery, DB-9 RS-232 interface, ICD connector for programming via ICSP and development with MPLAB ICD 2, 2 x 16 liquid crystal display, PCB footprints for H-Bridge motor driver, LIN transceiver and EEPROM. Also included are: header for expansion, eight LEDs, four potentiometers, three push buttons and a prototyping area. Included with the kit is a PIC16F627A and a PIC18F1320. Tutorial firmware is included along with the User's Guide.
14.16 PICDEM.net Internet/Ethernet Demonstration Board
The PICDEM.net demonstration board is an Internet/ Ethernet demonstration board using the PIC18F452 microcontroller and TCP/IP firmware. The board supports any 40-pin DIP device that conforms to the standard pinout used by the PIC16F877 or PIC18C452. This kit features a user friendly TCP/IP stack, web server with HTML, a 24L256 Serial EEPROM for Xmodem download to web pages into Serial EEPROM, ICSP/MPLAB ICD 2 interface connector, an Ethernet interface, RS-232 interface and a 16 x 2 LCD display. Also included is the book and CD-ROM "TCP/IP Lean, Web Servers for Embedded Systems," by Jeremy Bentham
DS39598D-page 114
2003 Microchip Technology Inc.
PIC16F818/819
14.20 PICDEM 17 Demonstration Board
The PICDEM 17 demonstration board is an evaluation board that demonstrates the capabilities of several Microchip microcontrollers, including PIC17C752, PIC17C756A, PIC17C762 and PIC17C766. A programmed sample is included. The PRO MATE II device programmer, or the PICSTART Plus development programmer, can be used to reprogram the device for user tailored application development. The PICDEM 17 demonstration board supports program download and execution from external on-board Flash memory. A generous prototype area is available for user hardware expansion.
14.24 PICDEM USB PIC16C7X5 Demonstration Board
The PICDEM USB Demonstration Board shows off the capabilities of the PIC16C745 and PIC16C765 USB microcontrollers. This board provides the basis for future USB products.
14.25 Evaluation and Programming Tools
In addition to the PICDEM series of circuits, Microchip has a line of evaluation kits and demonstration software for these products. * KEELOQ evaluation and programming tools for Microchip's HCS Secure Data Products * CAN developers kit for automotive network applications * Analog design boards and filter design software * PowerSmart battery charging evaluation/ calibration kits * IrDA(R) development kit * microID development and rfLabTM development software * SEEVAL(R) designer kit for memory evaluation and endurance calculations * PICDEM MSC demo boards for Switching mode power supply, high-power IR driver, delta sigma ADC and flow rate sensor Check the Microchip web page and the latest Product Selector Guide for the complete list of demonstration and evaluation kits.
14.21 PICDEM 18R PIC18C601/801 Demonstration Board
The PICDEM 18R demonstration board serves to assist development of the PIC18C601/801 family of Microchip microcontrollers. It provides hardware implementation of both 8-bit Multiplexed/Demultiplexed and 16-bit Memory modes. The board includes 2 Mb external Flash memory and 128 Kb SRAM memory, as well as serial EEPROM, allowing access to the wide range of memory types supported by the PIC18C601/801.
14.22 PICDEM LIN PIC16C43X Demonstration Board
The powerful LIN hardware and software kit includes a series of boards and three PICmicro microcontrollers. The small footprint PIC16C432 and PIC16C433 are used as slaves in the LIN communication and feature on-board LIN transceivers. A PIC16F874 Flash microcontroller serves as the master. All three microcontrollers are programmed with firmware to provide LIN bus communication.
14.23 PICkitTM 1 Flash Starter Kit
A complete "development system in a box", the PICkitTM Flash Starter Kit includes a convenient multi-section board for programming, evaluation and development of 8/14-pin Flash PIC(R) microcontrollers. Powered via USB, the board operates under a simple Windows GUI. The PICkit 1 Starter Kit includes the User's Guide (on CD ROM), PICkit 1 tutorial software and code for various applications. Also included are MPLAB(R) IDE (Integrated Development Environment) software, software and hardware "Tips 'n Tricks for 8-pin Flash PIC(R) Microcontrollers" Handbook and a USB interface cable. Supports all current 8/14-pin Flash PIC microcontrollers, as well as many future planned devices.
2003 Microchip Technology Inc.
DS39598D-page 115
PIC16F818/819
NOTES:
DS39598D-page 116
2003 Microchip Technology Inc.
PIC16F818/819
15.0 ELECTRICAL CHARACTERISTICS
Absolute Maximum Ratings
Ambient temperature under bias............................................................................................................ -40C to +125C Storage temperature .............................................................................................................................. -65C to +150C Voltage on any pin with respect to VSS (except VDD and MCLR) ................................................... -0.3V to (VDD + 0.3V) Voltage on VDD with respect to VSS ............................................................................................................ -0.3 to +7.5V Voltage on MCLR with respect to VSS (Note 2) .............................................................................................-0.3 to +14V Total power dissipation (Note 1) ..................................................................................................................................1W Maximum current out of VSS pin ...........................................................................................................................200 mA Maximum current into VDD pin ..............................................................................................................................200 mA Input clamp current, IIK (VI < 0 or VI > VDD) .......................................................................................................... 20 mA Output clamp current, IOK (VO < 0 or VO > VDD) ...................................................................................................20 mA Maximum output current sunk by any I/O pin..........................................................................................................25 mA Maximum output current sourced by any I/O pin ....................................................................................................25 mA Maximum current sunk by PORTA ........................................................................................................................100 mA Maximum current sourced by PORTA...................................................................................................................100 mA Maximum current sunk by PORTB........................................................................................................................100 mA Maximum current sourced by PORTB ..................................................................................................................100 mA Note 1: Power dissipation is calculated as follows: Pdis = VDD x {IDD - IOH} + {(VDD - VOH) x IOH} + (VOL x IOL) 2: Voltage spikes at the MCLR pin may cause latch-up. A series resistor of greater than 1 k should be used to pull MCLR to VDD, rather than tying the pin directly to VDD. NOTICE: Stresses above those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at those or any other conditions above those indicated in the operation listings of this specification is not implied. Exposure to maximum rating conditions for extended periods may affect device reliability.
2004 Microchip Technology Inc.
DS39598E-page 117
PIC16F818/819
FIGURE 15-1: PIC16F818/819 VOLTAGE-FREQUENCY GRAPH (INDUSTRIAL, EXTENDED) 6.0V 5.5V 5.0V
Voltage
4.5V 4.0V 3.5V 3.0V 2.5V 2.0V
16 MHz
20 MHz
Frequency
FIGURE 15-2:
PIC16LF818/819 VOLTAGE-FREQUENCY GRAPH (INDUSTRIAL) 6.0V 5.5V 5.0V
Voltage
4.5V 4.0V 3.5V 3.0V 2.5V 2.0V
4 MHz
10 MHz
Frequency
FMAX = (12 MHz/V) (VDDAPPMIN - 2.5V) + 4 MHz Note 1: VDDAPPMIN is the minimum voltage of the PICmicro(R) device in the application. Note 2: FMAX has a maximum frequency of 10 MHz.
DS39598E-page 118
2004 Microchip Technology Inc.
PIC16F818/819
15.1 DC Characteristics: Supply Voltage PIC16F818/819 (Industrial, Extended) PIC16LF818/819 (Industrial)
Standard Operating Conditions (unless otherwise stated) Operating temperature -40C TA +85C for industrial Standard Operating Conditions (unless otherwise stated) Operating temperature -40C TA +85C for industrial -40C TA +125C for extended Characteristic Supply Voltage PIC16LF818/819 PIC16F818/819 VDR VPOR RAM Data Retention Voltage(1) VDD Start Voltage to ensure internal Power-on Reset signal VDD Rise Rate to ensure internal Power-on Reset signal Brown-out Reset Voltage PIC16LF818/819 PIC16F818/819 3.65 3.65 -- -- 4.35 4.35 V V FMAX = 14 MHz(2) 2.0 4.0 1.5 -- -- -- -- -- 5.5 5.5 -- 0.7 V V V V See Section 12.4 "Power-on Reset (POR)" for details HS, XT, RC and LP Oscillator mode Min Typ Max Units Conditions
PIC16LF818/819 (Industrial) PIC16F818/819 (Industrial, Extended) Param No. Symbol VDD D001 D001 D002 D003
D004
SVDD
0.05
--
--
V/ms See Section 12.4 "Power-on Reset (POR)" for details
VBOR D005 D005 Legend: Note 1: 2:
Shading of rows is to assist in readability of the table. This is the limit to which VDD can be lowered in Sleep mode, or during a device Reset, without losing RAM data When BOR is enabled, the device will operate correctly until the VBOR voltage trip point is reached.
2004 Microchip Technology Inc.
DS39598E-page 119
PIC16F818/819
15.2 DC Characteristics: Power-Down and Supply Current PIC16F818/819 (Industrial, Extended) PIC16LF818/819 (Industrial)
Standard Operating Conditions (unless otherwise stated) Operating temperature -40C TA +85C for industrial Standard Operating Conditions (unless otherwise stated) Operating temperature -40C TA +85C for industrial -40C TA +125C for extended Typ Max Units Conditions
PIC16LF818/819 (Industrial) PIC16F818/819 (Industrial, Extended) Param No. Device
Power-Down Current (IPD)(1) PIC16LF818/819 0.1 0.1 0.4 PIC16LF818/819 0.3 0.3 0.7 All devices 0.6 0.6 1.2 Extended devices Legend: Note 1: 6.0 0.4 0.4 1.5 0.5 0.5 1.7 1.0 1.0 5.0 28 A A A A A A A A A A -40C +25C +85C -40C +25C +85C -40C +25C +85C +125C VDD = 5.0V VDD = 3.0V VDD = 2.0V
2:
3:
Shading of rows is to assist in readability of the table. The power-down current in Sleep mode does not depend on the oscillator type. Power-down current is measured with the part in Sleep mode, with all I/O pins in high-impedance state and tied to VDD or VSS and all features that add delta current disabled (such as WDT, Timer1 Oscillator, BOR, etc.). The supply current is mainly a function of operating voltage, frequency and mode. Other factors, such as I/O pin loading and switching rate, oscillator type and circuit, internal code execution pattern and temperature, also have an impact on the current consumption. The test conditions for all IDD measurements in active operation mode are: OSC1 = external square wave, from rail-to-rail; all I/O pins tri-stated, pulled to VDD; MCLR = VDD; WDT enabled/disabled as specified. For RC oscillator configurations, current through REXT is not included. The current through the resistor can be estimated by the formula Ir = VDD/2REXT (mA) with REXT in k.
DS39598E-page 120
2004 Microchip Technology Inc.
PIC16F818/819
15.2 DC Characteristics: Power-Down and Supply Current PIC16F818/819 (Industrial, Extended) PIC16LF818/819 (Industrial) (Continued)
Standard Operating Conditions (unless otherwise stated) Operating temperature -40C TA +85C for industrial Standard Operating Conditions (unless otherwise stated) Operating temperature -40C TA +85C for industrial -40C TA +125C for extended Typ Max Units Conditions
PIC16LF818/819 (Industrial) PIC16F818/819 (Industrial, Extended) Param No. Device Supply Current (IDD)(2,3) PIC16LF818/819
9 7 7
20 15 15 30 25 25 40 35 35 53
A A A A A A A A A A
-40C +25C +85C -40C +25C +85C -40C +25C +85C +125C VDD = 5.0V VDD = 3.0V FOSC = 32 kHZ (LP Oscillator) VDD = 2.0V
PIC16LF818/819
16 14 14
All devices
32 26 26
Extended devices Legend: Note 1:
35
2:
3:
Shading of rows is to assist in readability of the table. The power-down current in Sleep mode does not depend on the oscillator type. Power-down current is measured with the part in Sleep mode, with all I/O pins in high-impedance state and tied to VDD or VSS and all features that add delta current disabled (such as WDT, Timer1 Oscillator, BOR, etc.). The supply current is mainly a function of operating voltage, frequency and mode. Other factors, such as I/O pin loading and switching rate, oscillator type and circuit, internal code execution pattern and temperature, also have an impact on the current consumption. The test conditions for all IDD measurements in active operation mode are: OSC1 = external square wave, from rail-to-rail; all I/O pins tri-stated, pulled to VDD; MCLR = VDD; WDT enabled/disabled as specified. For RC oscillator configurations, current through REXT is not included. The current through the resistor can be estimated by the formula Ir = VDD/2REXT (mA) with REXT in k.
2004 Microchip Technology Inc.
DS39598E-page 121
PIC16F818/819
15.2 DC Characteristics: Power-Down and Supply Current PIC16F818/819 (Industrial, Extended) PIC16LF818/819 (Industrial) (Continued)
Standard Operating Conditions (unless otherwise stated) Operating temperature -40C TA +85C for industrial Standard Operating Conditions (unless otherwise stated) Operating temperature -40C TA +85C for industrial -40C TA +125C for extended Typ Max Units Conditions
PIC16LF818/819 (Industrial) PIC16F818/819 (Industrial, Extended) Param No. Device Supply Current (IDD)(2,3) PIC16LF818/819
72 76 76
95 90 90 175 170 170 380 360 360 500 315 310 310 610 600 600 1060 1050 1050 1.5
A A A A A A A A A A A A A A A A A A A mA
-40C +25C +85C -40C +25C +85C -40C +25C +85C +125C -40C +25C +85C -40C +25C +85C -40C +25C +85C +125C VDD = 5.0V VDD = 3.0V FOSC = 4 MHz (RC Oscillator)(3) VDD = 2.0V VDD = 5.0V VDD = 3.0V FOSC = 1 MHZ (RC Oscillator)(3) VDD = 2.0V
PIC16LF818/819
138 136 136
All devices
310 290 280
Extended devices PIC16LF818/819
350 270 280 285
PIC16LF818/819
460 450 450
All devices
900 890 890
Extended devices Legend: Note 1:
.920
2:
3:
Shading of rows is to assist in readability of the table. The power-down current in Sleep mode does not depend on the oscillator type. Power-down current is measured with the part in Sleep mode, with all I/O pins in high-impedance state and tied to VDD or VSS and all features that add delta current disabled (such as WDT, Timer1 Oscillator, BOR, etc.). The supply current is mainly a function of operating voltage, frequency and mode. Other factors, such as I/O pin loading and switching rate, oscillator type and circuit, internal code execution pattern and temperature, also have an impact on the current consumption. The test conditions for all IDD measurements in active operation mode are: OSC1 = external square wave, from rail-to-rail; all I/O pins tri-stated, pulled to VDD; MCLR = VDD; WDT enabled/disabled as specified. For RC oscillator configurations, current through REXT is not included. The current through the resistor can be estimated by the formula Ir = VDD/2REXT (mA) with REXT in k.
DS39598E-page 122
2004 Microchip Technology Inc.
PIC16F818/819
15.2 DC Characteristics: Power-Down and Supply Current PIC16F818/819 (Industrial, Extended) PIC16LF818/819 (Industrial) (Continued)
Standard Operating Conditions (unless otherwise stated) Operating temperature -40C TA +85C for industrial Standard Operating Conditions (unless otherwise stated) Operating temperature -40C TA +85C for industrial -40C TA +125C for extended Typ Max Units Conditions
PIC16LF818/819 (Industrial) PIC16F818/819 (Industrial, Extended) Param No. Device Supply Current (IDD)(2,3) All devices
1.8 1.6 1.3
2.3 2.2 2.2 4.2 4.0 4.0 5.0
mA mA mA mA mA mA mA
-40C +25C +85C -40C +25C +85C +125C VDD = 5.0V FOSC = 20 MHZ (HS Oscillator) VDD = 4.0V
All devices
3.0 2.5 2.5
Extended devices Legend: Note 1:
3.0
2:
3:
Shading of rows is to assist in readability of the table. The power-down current in Sleep mode does not depend on the oscillator type. Power-down current is measured with the part in Sleep mode, with all I/O pins in high-impedance state and tied to VDD or VSS and all features that add delta current disabled (such as WDT, Timer1 Oscillator, BOR, etc.). The supply current is mainly a function of operating voltage, frequency and mode. Other factors, such as I/O pin loading and switching rate, oscillator type and circuit, internal code execution pattern and temperature, also have an impact on the current consumption. The test conditions for all IDD measurements in active operation mode are: OSC1 = external square wave, from rail-to-rail; all I/O pins tri-stated, pulled to VDD; MCLR = VDD; WDT enabled/disabled as specified. For RC oscillator configurations, current through REXT is not included. The current through the resistor can be estimated by the formula Ir = VDD/2REXT (mA) with REXT in k.
2004 Microchip Technology Inc.
DS39598E-page 123
PIC16F818/819
15.2 DC Characteristics: Power-Down and Supply Current PIC16F818/819 (Industrial, Extended) PIC16LF818/819 (Industrial) (Continued)
Standard Operating Conditions (unless otherwise stated) Operating temperature -40C TA +85C for industrial Standard Operating Conditions (unless otherwise stated) Operating temperature -40C TA +85C for industrial -40C TA +125C for extended Typ Max Units Conditions
PIC16LF818/819 (Industrial) PIC16F818/819 (Industrial, Extended) Param No. Device Supply Current (IDD)(2,3) PIC16LF818/819
8 7 7
20 15 15 30 25 25 40 35 35 45 160 155 155 310 300 300 690 650 650 710 420 410 410 650 620 620 1.5 1.4 1.4 1.6
A A A A A A A A A A A A A A A A A A A A A A A A A A mA mA mA mA
-40C +25C +85C -40C +25C +85C -40C +25C +85C +125C -40C +25C +85C -40C +25C +85C -40C +25C +85C +125C -40C +25C +85C -40C +25C +85C -40C +25C +85C +125C VDD = 5.0V VDD = 3.0V FOSC = 4 MHz (RC_RUN mode, Internal RC Oscillator) VDD = 2.0V VDD = 5.0V VDD = 3.0V FOSC = 1 MHz (RC_RUN mode, Internal RC Oscillator) VDD = 2.0V VDD = 5.0V VDD = 3.0V FOSC = 31.25 kHz (RC_RUN mode, Internal RC Oscillator) VDD = 2.0V
PIC16LF818/819
16 14 14
All devices
32 29 29
Extended devices PIC16LF818/819
35 132 126 126
PIC16LF818/819
260 230 230
All devices
560 500 500
Extended devices PIC16LF818/819
570 310 300 300
PIC16LF818/819
550 530 530
All devices
1.2 1.1 1.1
Extended devices Legend: Note 1:
1.3
2:
3:
Shading of rows is to assist in readability of the table. The power-down current in Sleep mode does not depend on the oscillator type. Power-down current is measured with the part in Sleep mode, with all I/O pins in high-impedance state and tied to VDD or VSS and all features that add delta current disabled (such as WDT, Timer1 Oscillator, BOR, etc.). The supply current is mainly a function of operating voltage, frequency and mode. Other factors, such as I/O pin loading and switching rate, oscillator type and circuit, internal code execution pattern and temperature, also have an impact on the current consumption. The test conditions for all IDD measurements in active operation mode are: OSC1 = external square wave, from rail-to-rail; all I/O pins tri-stated, pulled to VDD; MCLR = VDD; WDT enabled/disabled as specified. For RC oscillator configurations, current through REXT is not included. The current through the resistor can be estimated by the formula Ir = VDD/2REXT (mA) with REXT in k.
DS39598E-page 124
2004 Microchip Technology Inc.
PIC16F818/819
15.2 DC Characteristics: Power-Down and Supply Current PIC16F818/819 (Industrial, Extended) PIC16LF818/819 (Industrial) (Continued)
Standard Operating Conditions (unless otherwise stated) Operating temperature -40C TA +85C for industrial Standard Operating Conditions (unless otherwise stated) Operating temperature -40C TA +85C for industrial -40C TA +125C for extended Typ Max Units Conditions
PIC16LF818/819 (Industrial) PIC16F818/819 (Industrial, Extended) Param No. Device Supply Current (IDD)(2,3) PIC16LF818/819
.950 .930 .930
1.3 1.2 1.2 3.0 2.8 2.8 4.0
mA mA mA mA mA mA mA
-40C +25C +85C -40C +25C +85C +125C VDD = 5.0V VDD = 3.0V FOSC = 8 MHz (RC_RUN mode, Internal RC Oscillator)
All devices
1.8 1.7 1.7
Extended devices Legend: Note 1:
2.0
2:
3:
Shading of rows is to assist in readability of the table. The power-down current in Sleep mode does not depend on the oscillator type. Power-down current is measured with the part in Sleep mode, with all I/O pins in high-impedance state and tied to VDD or VSS and all features that add delta current disabled (such as WDT, Timer1 Oscillator, BOR, etc.). The supply current is mainly a function of operating voltage, frequency and mode. Other factors, such as I/O pin loading and switching rate, oscillator type and circuit, internal code execution pattern and temperature, also have an impact on the current consumption. The test conditions for all IDD measurements in active operation mode are: OSC1 = external square wave, from rail-to-rail; all I/O pins tri-stated, pulled to VDD; MCLR = VDD; WDT enabled/disabled as specified. For RC oscillator configurations, current through REXT is not included. The current through the resistor can be estimated by the formula Ir = VDD/2REXT (mA) with REXT in k.
2004 Microchip Technology Inc.
DS39598E-page 125
PIC16F818/819
15.2 DC Characteristics: Power-Down and Supply Current PIC16F818/819 (Industrial, Extended) PIC16LF818/819 (Industrial) (Continued)
Standard Operating Conditions (unless otherwise stated) Operating temperature -40C TA +85C for industrial Standard Operating Conditions (unless otherwise stated) Operating temperature -40C TA +85C for industrial -40C TA +125C for extended Typ Max Units Conditions
PIC16LF818/819 (Industrial) PIC16F818/819 (Industrial, Extended) Param No. D022 (IWDT) Device
Module Differential Currents (IWDT, IBOR, ILVD, IOSCB, IAD) Watchdog Timer 1.5 2.2 2.7 2.3 2.7 3.1 3.0 3.3 3.9 Extended Devices 5.0 40 1.7 1.8 2.0 2.2 2.6 2.9 3.0 3.2 3.4 3.8 3.8 4.0 4.6 4.6 4.8 10.0 10.0 13.0 21.0 60 2.3 2.3 2.3 3.8 3.8 3.8 6.0 6.0 7.0 2.0 2.0 2.0 8.0 A A A A A A A A A A A A A A A A A A A A A A A A -40C +25C +85C -40C +25C +85C -40C +25C +85C +125C -40C to +85C -40C +25C +85C -40C +25C +85C -40C +25C +85C -40C to +85C -40C to +85C -40C to +85C -40C to +125C VDD = 2.0V VDD = 3.0V VDD = 5.0V A/D on, Sleep, not converting VDD = 5.0V VDD = 3.0V 32 kHz on Timer1 VDD = 2.0V VDD = 5.0V VDD = 5.0V VDD = 3.0V VDD = 2.0V
D022A (IBOR) D025 (IOSCB)
Brown-out Reset Timer1 Oscillator
D026 (IAD)
A/D Converter 0.001 0.001 0.003 Extended Devices 4.0
Legend: Note 1:
2:
3:
Shading of rows is to assist in readability of the table. The power-down current in Sleep mode does not depend on the oscillator type. Power-down current is measured with the part in Sleep mode, with all I/O pins in high-impedance state and tied to VDD or VSS and all features that add delta current disabled (such as WDT, Timer1 Oscillator, BOR, etc.). The supply current is mainly a function of operating voltage, frequency and mode. Other factors, such as I/O pin loading and switching rate, oscillator type and circuit, internal code execution pattern and temperature, also have an impact on the current consumption. The test conditions for all IDD measurements in active operation mode are: OSC1 = external square wave, from rail-to-rail; all I/O pins tri-stated, pulled to VDD; MCLR = VDD; WDT enabled/disabled as specified. For RC oscillator configurations, current through REXT is not included. The current through the resistor can be estimated by the formula Ir = VDD/2REXT (mA) with REXT in k.
DS39598E-page 126
2004 Microchip Technology Inc.
PIC16F818/819
15.3 DC Characteristics: Internal RC Accuracy PIC16F818/819, PIC16F818/819 TSL (Industrial, Extended) PIC16LF818/819, PIC16LF818/819 TSL (Industrial)
Standard Operating Conditions (unless otherwise stated) Operating temperature -40C TA +85C for industrial Standard Operating Conditions (unless otherwise stated) Operating temperature -40C TA +85C for industrial -40C TA +125C for extended Min Typ Max Units Conditions
PIC16LF818/819(3) PIC16LF818/819 TSL(3) (Industrial) PIC16F818/819(3) PIC16F818/819 TSL(3) (Industrial, Extended) Param No. Device
INTOSC Accuracy @ Freq = 8 MHz, 4 MHz, 2 MHz, 1 MHz, 500 kHz, 250 kHz, 125 kHz(1) PIC16LF818/819 -5 -25 -30 PIC16F818/819(4) -5 -25 -30 -35 PIC16LF818/819 TSL -2 -5 -10 PIC16F818/819 TSL(5) -2 -5 -10 -15 INTRC Accuracy @ Freq = 31 kHz(2) PIC16LF818/819 PIC16F818/819
(4)
1 -- -- 1 -- -- -- 1 -- -- 1 -- -- -- -- -- -- --
5 25 30 5 25 30 35 2 5 10 2 5 10 15 35.938 35.938 35.938 35.938
% % % % % % % % % % % % % % kHz kHz kHz kHz
+25C -10C to +85C -40C to +85C +25C -10C to +85C -40C to +85C -40C to +125C +25C -10C to +85C -40C to +85C +25C -10C to +85C -40C to +85C -40C to +125C -40C to +85C -40C to +85C -40C to +85C -40C to +85C VDD = 2.7-3.3V VDD = 4.5-5.5V VDD = 2.7-3.3V VDD = 4.5-5.5V VDD = 4.5-5.5V VDD = 2.7-3.3V VDD = 4.5-5.5V VDD = 2.7-3.3V
26.562 26.562 26.562 26.562
PIC16LF818/819 TSL PIC16F818/819 TSL(5) Legend: Note 1: 2: 3: 4: 5:
Shading of rows is to assist in readability of the table. Frequency calibrated at 25C. OSCTUNE register can be used to compensate for temperature drift. INTRC frequency after calibration. The only specification difference between a non-TSL device and a TSL device is the internal RC oscillator specifications listed above. All other specifications are maintained. Example part number for the specifications listed above: PIC16F818-I/SS (PIC16F818 device, Industrial temperature, SSOP package). Example part number for the specifications listed above: PIC16F818-I/SSTSL (PIC16F818 device, Industrial temperature, SSOP package).
2004 Microchip Technology Inc.
DS39598E-page 127
PIC16F818/819
15.4 DC Characteristics: PIC16F818/819 (Industrial, Extended) PIC16LF818/819 (Industrial)
Standard Operating Conditions (unless otherwise stated) Operating temperature -40C TA +85C for industrial -40C TA +125C for extended Operating voltage VDD range as described in Section 15.1 "DC Characteristics: Supply Voltage". Min Typ Max Units Conditions
DC CHARACTERISTICS
Param No.
Sym VIL
Characteristic Input Low Voltage I/O ports: with TTL buffer with Schmitt Trigger buffer MCLR, OSC1 (in RC mode) OSC1 (in XT and LP mode) OSC1 (in HS mode) Ports RB1 and RB4:
D030 D030A D031 D032 D033
VSS VSS VSS VSS VSS VSS VSS
-- -- -- -- -- -- --
0.15 VDD 0.8V 0.2 VDD 0.2 VDD 0.3V 0.3 VDD 0.3 VDD
V V V V V V V
For entire VDD range 4.5V VDD 5.5V (Note 1)
D034 VIH D040 D040A D041 D042 D042A D043 D044 D070 D060 D061 D063 IIL
with Schmitt Trigger buffer Input High Voltage I/O ports: with TTL buffer with Schmitt Trigger buffer MCLR OSC1 (in XT and LP mode) OSC1 (in HS mode) OSC1 (in RC mode) Ports RB1 and RB4: with Schmitt Trigger buffer IPURB PORTB Weak Pull-up Current Input Leakage Current (Notes 2, 3) I/O ports MCLR OSC1
For entire VDD range
2.0 0.25 VDD + 0.8V 0.8 VDD 0.8 VDD 1.6V 0.7 VDD 0.9 VDD 0.7 VDD 50 -- -- --
-- -- -- -- -- -- -- -- 250 -- -- --
VDD VDD VDD VDD VDD VDD VDD VDD 400 1 5 5
V V V V V V V V A A A A
4.5V VDD 5.5V For entire VDD range For entire VDD range
(Note 1) For entire VDD range VDD = 5V, VPIN = VSS Vss VPIN VDD, pin at high-impedance Vss VPIN VDD Vss VPIN VDD, XT, HS and LP oscillator configuration
Data in "Typ" column is at 5V, 25C unless otherwise stated. These parameters are for design guidance only and are not tested. Note 1: In RC oscillator configuration, the OSC1/CLKI pin is a Schmitt Trigger input. It is not recommended that the PIC16F818/819 be driven with external clock in RC mode. 2: The leakage current on the MCLR pin is strongly dependent on the applied voltage level. The specified levels represent normal operating conditions. Higher leakage current may be measured at different input voltages. 3: Negative current is defined as current sourced by the pin.
DS39598E-page 128
2004 Microchip Technology Inc.
PIC16F818/819
15.4 DC Characteristics: PIC16F818/819 (Industrial, Extended) PIC16LF818/819 (Industrial) (Continued)
Standard Operating Conditions (unless otherwise stated) Operating temperature -40C TA +85C for industrial -40C TA +125C for extended Operating voltage VDD range as described in Section 15.1 "DC Characteristics: Supply Voltage". Min Typ Max Units Conditions
DC CHARACTERISTICS
Param No. D080 D083
Sym VOL
Characteristic Output Low Voltage I/O ports OSC2/CLKO (RC oscillator config)
-- --
-- --
0.6 0.6
V V
IOL = 8.5 mA, VDD = 4.5V, -40C to +125C IOL = 1.6 mA, VDD = 4.5V, -40C to +125C IOH = -3.0 mA, VDD = 4.5V, -40C to +125C IOH = -1.3 mA, VDD = 4.5V, -40C to +125C In XT, HS and LP modes when external clock is used to drive OSC1
VOH D090 D092
Output High Voltage I/O ports (Note 3) OSC2/CLKO (RC oscillator config) VDD - 0.7 VDD - 0.7 -- -- -- -- V V
Capacitive Loading Specs on Output Pins D100 COSC2 OSC2 pin -- -- 15 pF
D101 D102 D120 D121
CIO CB ED
All I/O pins and OSC2 (in RC mode) SCL, SDA in I2CTM mode Data EEPROM Memory Endurance
-- -- 100K 10K VMIN
-- -- 1M 100K --
50 400 -- -- 5.5
pF pF E/W -40C to +85C E/W +85C to +125C V Using EECON to read/write, VMIN = min. operating voltage
VDRW VDD for read/write
D122 D130 D131 D132A
TDEW Erase/write cycle time Program Flash Memory EP VPR Endurance VDD for read VDD for erase/write
-- 10K 1K VMIN VMIN
4 100K 10K -- --
8 -- -- 5.5 5.5
ms E/W -40C to +85C E/W +85C to +125C V V Using EECON to read/write, VMIN = min. operating voltage
D133 D134
TPE TPW
Erase cycle time Write cycle time
-- --
2 2
4 4
ms ms
Data in "Typ" column is at 5V, 25C unless otherwise stated. These parameters are for design guidance only and are not tested. Note 1: In RC oscillator configuration, the OSC1/CLKI pin is a Schmitt Trigger input. It is not recommended that the PIC16F818/819 be driven with external clock in RC mode. 2: The leakage current on the MCLR pin is strongly dependent on the applied voltage level. The specified levels represent normal operating conditions. Higher leakage current may be measured at different input voltages. 3: Negative current is defined as current sourced by the pin.
2004 Microchip Technology Inc.
DS39598E-page 129
PIC16F818/819
15.5 Timing Parameter Symbology
The timing parameter symbols have been created using one of the following formats: 1. TppS2ppS 2. TppS T F Frequency Lowercase letters (pp) and their meanings: pp cc CCP1 ck CLKO cs CS di SDI do SDO dt Data in io I/O port mc MCLR Uppercase letters and their meanings: S F Fall H High I Invalid (High-impedance) L Low I2C only AA BUF output access Bus free T Time 3. TCC:ST 4. Ts (I2C specifications only) (I2C specifications only)
osc rd rw sc ss t0 t1 wr
OSC1 RD RD or WR SCK SS T0CKI T1CKI WR
P R V Z High Low
Period Rise Valid High-impedance High Low
TCC:ST (I2C specifications only) CC HD Hold ST DAT DATA input hold STA Start condition
SU STO
Setup Stop condition
FIGURE 15-3:
LOAD CONDITIONS
Load Condition 1 VDD/2 Load Condition 2
RL
Pin VSS RL = 464 CL = 50 pF 15 pF
CL
Pin VSS
CL
for all pins except OSC2, but including PORTD and PORTE outputs as ports for OSC2 output
DS39598E-page 130
2004 Microchip Technology Inc.
PIC16F818/819
FIGURE 15-4: EXTERNAL CLOCK TIMING
Q4 Q1 Q2 Q3 Q4 Q1
OSC1 1 2 CLKO 3 3 4 4
TABLE 15-1:
Param No. Sym FOSC
EXTERNAL CLOCK TIMING REQUIREMENTS
Characteristic External CLKI Frequency (Note 1) Min DC DC DC Oscillator Frequency (Note 1) DC 0.1 4 5 Typ -- -- -- -- -- -- -- -- -- -- -- -- -- -- TCY -- -- -- -- -- -- Max 1 20 32 4 4 20 200 -- -- -- -- 10,000 250 -- DC -- -- -- 25 50 15 Units Conditions
MHz XT and RC Oscillator mode MHz HS Oscillator mode kHz LP Oscillator mode MHz RC Oscillator mode MHz XT Oscillator mode MHz HS Oscillator mode kHz LP Oscillator mode ns ns ms ns ns ns ms ns ns ms ns ns ns ns XT and RC Oscillator mode HS Oscillator mode LP Oscillator mode RC Oscillator mode XT Oscillator mode HS Oscillator mode LP Oscillator mode TCY = 4/FOSC XT Oscillator LP Oscillator HS Oscillator XT Oscillator LP Oscillator HS Oscillator
1
TOSC
External CLKI Period (Note 1)
1000 50 5
Oscillator Period (Note 1)
250 250 50 5
2 3
TCY TOSL, TOSH
Instruction Cycle Time (Note 1) External Clock in (OSC1) High or Low Time
200 500 2.5 15 -- -- --
4
TOSR, TOSF
External Clock in (OSC1) Rise or Fall Time
Data in "Typ" column is at 5V, 25C unless otherwise stated. These parameters are for design guidance only and are not tested. Note 1: Instruction cycle period (TCY) equals four times the input oscillator time base period. All specified values are based on characterization data for that particular oscillator type, under standard operating conditions, with the device executing code. Exceeding these specified limits may result in an unstable oscillator operation and/or higher than expected current consumption. All devices are tested to operate at "min." values with an external clock applied to the OSC1/CLKI pin. When an external clock input is used, the "max." cycle time limit is "DC" (no clock) for all devices.
2004 Microchip Technology Inc.
DS39598E-page 131
PIC16F818/819
FIGURE 15-5: CLKO AND I/O TIMING
Q4 OSC1 10 CLKO 13 14 I/O pin (Input) 17 I/O pin (Output) Old Value 15 New Value 19 18 12 16 11 Q1 Q2 Q3
20, 21 Note: Refer to Figure 15-3 for load conditions.
TABLE 15-2:
Param No. 10* 11* 12* 13* 14* 15* 16* 17* 18* 19* 20* 21* 22* 23* Symbol
CLKO AND I/O TIMING REQUIREMENTS
Characteristic Min -- -- -- -- -- TOSC + 200 0 -- 100 200 0 -- -- -- -- TCY TCY PIC16F818/819 PIC16LF818/819 PIC16F818/819 PIC16LF818/819 PIC16F818/819 PIC16LF818/819 Typ 75 75 35 35 -- -- -- 100 -- -- -- 10 -- 10 -- -- -- Max 200 200 100 100 0.5 TCY + 20 -- -- 255 -- -- -- 40 145 40 145 -- -- Units Conditions ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns (Note 1) (Note 1) (Note 1) (Note 1) (Note 1) (Note 1) (Note 1)
TOSH2CKL OSC1 to CLKO TOSH2CKH OSC1 to CLKO TCKR TCKF TCKL2IOV TIOV2CKH TCKH2IOI TOSH2IOV TOSH2IOI CLKO Rise Time CLKO Fall Time CLKO to Port Out Valid Port In Valid before CLKO Port In Hold after CLKO OSC1 (Q1 cycle) to Port Out Valid OSC1 (Q2 cycle) to Port Input Invalid (I/O in hold time)
TIOV2OSH Port Input Valid to OSC1 (I/O in setup time) TIOR TIOF TINP TRBP * Port Output Rise Time Port Output Fall Time INT pin High or Low Time RB7:RB4 Change INT High or Low Time
Note 1:
These parameters are characterized but not tested. Data in "Typ" column is at 5V, 25C unless otherwise stated. These parameters are for design guidance only and are not tested. These parameters are asynchronous events, not related to any internal clock edges. Measurements are taken in RC mode, where CLKO output is 4 x TOSC.
DS39598E-page 132
2004 Microchip Technology Inc.
PIC16F818/819
FIGURE 15-6: RESET, WATCHDOG TIMER, OSCILLATOR START-UP TIMER AND POWER-UP TIMER TIMING
VDD MCLR Internal POR 33 PWRT Time-out Oscillator Time-out Internal Reset Watchdog Timer Reset 34 I/O pins 32 30
31 34
Note: Refer to Figure 15-3 for load conditions.
FIGURE 15-7:
BROWN-OUT RESET TIMING
VDD
VBOR 35
TABLE 15-3:
Param No. 30 31* 32 33* 34 35 *
RESET, WATCHDOG TIMER, OSCILLATOR START-UP TIMER, POWER-UP TIMER AND BROWN-OUT RESET REQUIREMENTS
Characteristic MCLR Pulse Width (Low) Watchdog Timer Time-out Period (no prescaler) Oscillation Start-up Timer Period Power-up Timer Period I/O High-Impedance from MCLR Low or Watchdog Timer Reset Brown-out Reset Pulse Width Min 2 13.6 -- 61.2 -- 100 Typ -- 16 1024 TOSC 72 -- -- Max -- 18.4 -- 82.8 2.1 -- Units s ms -- ms s s VDD VBOR (D005) Conditions VDD = 5V, -40C to +85C VDD = 5V, -40C to +85C TOSC = OSC1 period VDD = 5V, -40C to +85C
Symbol TMCL TWDT TOST TPWRT TIOZ TBOR
These parameters are characterized but not tested. Data in "Typ" column is at 5V, 25C unless otherwise stated. These parameters are for design guidance only and are not tested.
2004 Microchip Technology Inc.
DS39598E-page 133
PIC16F818/819
FIGURE 15-8: TIMER0 AND TIMER1 EXTERNAL CLOCK TIMINGS
RA4/T0CKI 40 42 41
RB6/T1OSO/T1CKI 45 47 TMR0 or TMR1 Note: Refer to Figure 15-3 for load conditions. 46 48
TABLE 15-4:
Param No. 40* 41* 42* Symbol TT0H TT0L TT0P
TIMER0 AND TIMER1 EXTERNAL CLOCK REQUIREMENTS
Characteristic T0CKI High Pulse Width T0CKI Low Pulse Width T0CKI Period No Prescaler With Prescaler No Prescaler With Prescaler No Prescaler With Prescaler Min 0.5 TCY + 20 10 0.5 TCY + 20 10 TCY + 40 Greater of: 20 or TCY + 40 N 0.5 TCY + 20 15 25 30 50 0.5 TCY + 20 15 25 30 50 Greater of: 30 or TCY + 40 N Greater of: 50 or TCY + 40 N 60 100 DC 2 TOSC -- -- -- -- -- -- ns ns Typ -- -- -- -- -- -- Max -- -- -- -- -- -- Units ns ns ns ns ns ns N = prescale value (2, 4, ..., 256) Must also meet parameter 47 Conditions Must also meet parameter 42 Must also meet parameter 42
45*
TT1H
T1CKI High Time
Synchronous, Prescaler = 1 Synchronous, PIC16F818/819 Prescaler = 2,4,8 PIC16LF818/819 Asynchronous PIC16F818/819 PIC16LF818/819
-- -- -- -- -- -- -- -- -- -- --
-- -- -- -- -- -- -- -- -- -- --
ns ns ns ns ns ns ns ns ns ns ns
46*
TT1L
T1CKI Low Time Synchronous, Prescaler = 1 Synchronous, PIC16F818/819 Prescaler = 2,4,8 PIC16LF818/819 Asynchronous PIC16F818/819 PIC16LF818/819 PIC16F818/819
Must also meet parameter 47
47*
TT1P
T1CKI Input Period
Synchronous
N = prescale value (1, 2, 4, 8) N = prescale value (1, 2, 4, 8)
PIC16LF818/819
Asynchronous FT1 48
PIC16F818/819 PIC16LF818/819
Timer1 Oscillator Input Frequency Range (Oscillator enabled by setting bit T1OSCEN)
32.768 kHz 7 TOSC --
TCKEZTMR1 Delay from External Clock Edge to Timer Increment
* These parameters are characterized but not tested. Data in "Typ" column is at 5V, 25C unless otherwise stated. These parameters are for design guidance only and are not tested.
DS39598E-page 134
2004 Microchip Technology Inc.
PIC16F818/819
FIGURE 15-9: CAPTURE/COMPARE/PWM TIMINGS (CCP1)
CCP1 (Capture Mode)
50 52
51
CCP1 (Compare or PWM Mode) 53 Note: Refer to Figure 15-3 for load conditions. 54
TABLE 15-5:
Param Symbol No. 50* TCCL
CAPTURE/COMPARE/PWM REQUIREMENTS (CCP1)
Characteristic CCP1 No Prescaler Input Low Time Min 0.5 TCY + 20 PIC16F818/819 10 20 0.5 TCY + 20 PIC16F818/819 With Prescaler PIC16LF818/819 10 20 3 TCY + 40 N PIC16F818/819 PIC16LF818/819 PIC16F818/819 PIC16LF818/819 -- -- -- -- Typ Max Units -- -- -- -- -- -- -- 10 25 10 25 -- -- -- -- -- -- -- 25 50 25 45 ns ns ns ns ns ns ns ns ns ns ns N = prescale value (1,4 or 16) Conditions
With Prescaler PIC16LF818/819 51* TCCH CCP1 Input High Time No Prescaler
52* 53* 54*
TCCP TCCR TCCF
CCP1 Input Period CCP1 Output Rise Time CCP1 Output Fall Time
* These parameters are characterized but not tested. Data in "Typ" column is at 5V, 25C unless otherwise stated. These parameters are for design guidance only and are not tested.
2004 Microchip Technology Inc.
DS39598E-page 135
PIC16F818/819
FIGURE 15-10:
SS 70 SCK (CKP = 0) 71 72 78 SCK (CKP = 1) 79 78 79
SPITM MASTER MODE TIMING (CKE = 0, SMP = 0)
80 SDO MSb 75, 76 SDI MSb In 74 73 Note: Refer to Figure 15-3 for load conditions. Bit 6 - - - -1
Bit 6 - - - - - -1
LSb
LSb In
FIGURE 15-11:
SS
SPITM MASTER MODE TIMING (CKE = 1, SMP = 1)
81 SCK (CKP = 0) 71 73 SCK (CKP = 1) 80 78 72 79
SDO
MSb 75, 76
Bit 6 - - - - - -1
LSb
SDI
MSb In 74
Bit 6 - - - -1
LSb In
Note: Refer to Figure 15-3 for load conditions.
DS39598E-page 136
2004 Microchip Technology Inc.
PIC16F818/819
FIGURE 15-12: SPITM SLAVE MODE TIMING (CKE = 0)
SS 70 SCK (CKP = 0) 71 72 78 79 83
SCK (CKP = 1) 79 78
80 SDO MSb 75, 76 SDI MSb In 74 73 Note: Refer to Figure 15-3 for load conditions. Bit 6 - - - -1
Bit 6 - - - - - -1
LSb 77 LSb In
FIGURE 15-13:
SPITM SLAVE MODE TIMING (CKE = 1)
82
SS
SCK (CKP = 0)
70 83 71 72
SCK (CKP = 1) 80
SDO
MSb 75, 76
Bit 6 - - - - - -1
LSb 77
SDI
MSb In 74
Bit 6 - - - -1
LSb In
Note: Refer to Figure 15-3 for load conditions.
2004 Microchip Technology Inc.
DS39598E-page 137
PIC16F818/819
TABLE 15-6:
Param No. 70* 71* 72* 73* 74* 75* 76* 77* 78* 79* 80* 81* 82* 83*
SPITM MODE REQUIREMENTS
Characteristic SS to SCK or SCK Input SCK Input High Time (Slave mode) SCK Input Low Time (Slave mode) Setup Time of SDI Data Input to SCK Edge Hold Time of SDI Data Input to SCK Edge SDO Data Output Rise Time SDO Data Output Fall Time SS to SDO Output High-Impedance SCK Output Rise Time (Master mode) SDO Data Output Valid after SCK Edge PIC16F818/819 PIC16LF818/819 PIC16F818/819 PIC16LF818/819 PIC16F818/819 PIC16LF818/819 Min TCY TCY + 20 TCY + 20 100 100 -- -- -- 10 -- -- -- -- -- TCY -- 1.5 TCY + 40 Typ -- -- -- -- -- 10 25 10 -- 10 25 10 -- -- -- -- -- Max -- -- -- -- -- 25 50 25 50 25 50 25 50 145 -- 50 -- Units ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns Conditions
Symbol TSSL2SCH, TSSL2SCL TSCH TSCL TDIV2SCH, TDIV2SCL TSCH2DIL, TSCL2DIL TDOR TDOF TSSH2DOZ TSCR TSCF TSCH2DOV, TSCL2DOV TDOV2SCH, TDOV2SCL TSSL2DOV TSCH2SSH, TSCL2SSH *
SCK Output Fall Time (Master mode)
SDO Data Output Setup to SCK Edge SDO Data Output Valid after SS Edge SS after SCK Edge
These parameters are characterized but not tested. Data in "Typ" column is at 5V, 25C unless otherwise stated. These parameters are for design guidance only and are not tested.
FIGURE 15-14:
I2CTM BUS START/STOP BITS TIMING
SCL 90 SDA
91 92
93
Start Condition Note: Refer to Figure 15-3 for load conditions.
Stop Condition
DS39598E-page 138
2004 Microchip Technology Inc.
PIC16F818/819
TABLE 15-7:
Param No. 90* 91* 92* 93 *
I2CTM BUS START/STOP BITS REQUIREMENTS
Characteristic Start Condition Setup Time Start Condition Hold Time Stop Condition Setup Time Stop Condition Hold Time 100 kHz mode 400 kHz mode 100 kHz mode 400 kHz mode 100 kHz mode 400 kHz mode 100 kHz mode 400 kHz mode Min 4700 600 4000 600 4700 600 4000 600 Typ -- -- -- -- -- -- -- -- Max -- -- -- -- -- -- -- -- ns ns ns Units ns Conditions Only relevant for Repeated Start condition After this period, the first clock pulse is generated
Symbol TSU:STA THD:STA TSU:STO THD:STO
These parameters are characterized but not tested.
FIGURE 15-15:
I2CTM BUS DATA TIMING
103 100 101 102
SCL
90 91
106
107 92
SDA In 110 109 SDA Out Note: Refer to Figure 15-3 for load conditions. 109
2004 Microchip Technology Inc.
DS39598E-page 139
PIC16F818/819
TABLE 15-8:
Param. No. 100*
I2CTM BUS DATA REQUIREMENTS
Characteristic Clock High Time 100 kHz mode 400 kHz mode SSP Module Min 4.0 0.6 1.5 TCY 4.7 1.3 1.5 TCY -- 20 + 0.1 CB -- 20 + 0.1 CB 4.7 0.6 4.0 0.6 0 0 250 100 4.7 0.6 -- -- 4.7 1.3 -- Max -- -- -- -- -- -- 1000 300 300 300 -- -- -- -- -- 0.9 -- -- -- -- 3500 -- -- -- 400 ns ns ns ns s s s s ns s ns ns s s ns ns s s pF Time the bus must be free before a new transmission can start (Note 1) (Note 2) CB is specified to be from 10-400 pF Only relevant for Repeated Start condition After this period, the first clock pulse is generated CB is specified to be from 10-400 pF s s Units s s Conditions
Symbol THIGH
101*
TLOW
Clock Low Time
100 kHz mode 400 kHz mode SSP Module
102*
TR
SDA and SCL Rise 100 kHz mode Time 400 kHz mode SDA and SCL Fall Time Start Condition Setup Time 100 kHz mode 400 kHz mode 100 kHz mode 400 kHz mode
103*
TF
90* 91* 106* 107* 92* 109* 110*
TSU:STA THD:STA THD:DAT TSU:DAT TSU:STO TAA TBUF
Start Condition Hold 100 kHz mode Time 400 kHz mode Data Input Hold Time Data Input Setup Time Stop Condition Setup Time Output Valid from Clock Bus Free Time 100 kHz mode 400 kHz mode 100 kHz mode 400 kHz mode 100 kHz mode 400 kHz mode 100 kHz mode 400 kHz mode 100 kHz mode 400 kHz mode
CB * Note 1: 2:
Bus Capacitive Loading
These parameters are characterized but not tested. As a transmitter, the device must provide this internal minimum delay time to bridge the undefined region (min. 300 ns) of the falling edge of SCL to avoid unintended generation of Start or Stop conditions. A Fast mode (400 kHz) I2CTM bus device can be used in a Standard mode (100 kHz) I2C bus system but the requirement, TSU:DAT 250 ns, must then be met. This will automatically be the case if the device does not stretch the LOW period of the SCL signal. If such a device does stretch the LOW period of the SCL signal, it must output the next data bit to the SDA line, TR max. + TSU:DAT = 1000 + 250 = 1250 ns (according to the Standard mode I2C bus specification), before the SCL line is released.
DS39598E-page 140
2004 Microchip Technology Inc.
PIC16F818/819
TABLE 15-9:
Param Sym No. A01 A03 A04 A06 A07 A10 A20 A21 A22 A25 A30 A40 NR EIL EDL EOFF EGN -- VREF
A/D CONVERTER CHARACTERISTICS: PIC16F818/819 (INDUSTRIAL, EXTENDED) PIC16LF818/819 (INDUSTRIAL)
Characteristic Min -- -- -- -- -- -- 2.0 AVDD - 2.5V AVSS - 0.3V VSS - 0.3V -- -- -- -- -- -- 220 90 -- Typ -- -- -- -- -- guaranteed(3) -- Max 10-bits <1 <1 <2 <1 -- VDD + 0.3 AVDD + 0.3V VREF+ - 2.0V VREF + 0.3V 2.5 -- -- 5 Units bit LSb LSb LSb LSb -- V V V V k A A A (Note 4) Average current consumption when A/D is on (Note 1) During VAIN acquisition. Based on differential of VHOLD to VAIN to charge CHOLD, see Section 11.1 "A/D Acquisition Requirements". During A/D conversion cycle Conditions VREF = VDD = 5.12V, VSS VAIN VREF VREF = VDD = 5.12V, VSS VAIN VREF VREF = VDD = 5.12V, VSS VAIN VREF VREF = VDD = 5.12V, VSS VAIN VREF VREF = VDD = 5.12V, VSS VAIN VREF VSS VAIN VREF
Resolution Integral Linearity Error Differential Linearity Error Offset Error Gain Error Monotonicity Reference Voltage (VREF+ - VREF-)
VREF+ Reference Voltage High VREF- Reference Voltage Low VAIN ZAIN IAD Analog Input Voltage Recommended Impedance of Analog Voltage Source A/D Conversion Current (VDD) PIC16F818/819 PIC16LF818/819
A50
IREF
VREF Input Current (Note 2)
-- Note 1: 2: 3: 4:
--
150
A
Data in "Typ" column is at 5V, 25C unless otherwise stated. These parameters are for design guidance only and are not tested. When A/D is off, it will not consume any current other than minor leakage current. The power-down current spec includes any such leakage from the A/D module. VREF current is from RA3 pin or VDD pin, whichever is selected as reference input. The A/D conversion result never decreases with an increase in the input voltage and has no missing codes. Maximum allowed impedance for analog voltage source is 10 k. This requires higher acquisition time.
2004 Microchip Technology Inc.
DS39598E-page 141
PIC16F818/819
FIGURE 15-16: A/D CONVERSION TIMING
1 TCY (TOSC/2)(1) Q4 130 A/D CLK A/D DATA ADRES ADIF GO Sampling Stopped DONE 132 9 8 7 ... ... 2 1 0 NEW_DATA 131
BSF ADCON0, GO
OLD_DATA
SAMPLE
Note: If the A/D clock source is selected as RC, a time of TCY is added before the A/D clock starts. This allows the SLEEP instruction to be executed.
TABLE 15-10: A/D CONVERSION REQUIREMENTS
Param Symbol No. 130 TAD Characteristic A/D Clock Period PIC16F818/819 PIC16LF818/819 PIC16F818/819 PIC16LF818/819 131 132 TCNV TACQ Conversion Time (not including S/H time) (Note 1) Acquisition Time (Note 2) 10* Min 1.6 3.0 2.0 3.0 Typ -- -- 4.0 6.0 -- 40 -- Max -- -- 6.0 9.0 12 -- -- Units s s s s TAD s s The minimum time is the amplifier settling time. This may be used if the "new" input voltage has not changed by more than 1 LSb (i.e., 5.0 mV @ 5.12V) from the last sampled voltage (as stated on CHOLD). If the A/D clock source is selected as RC, a time of TCY is added before the A/D clock starts. This allows the SLEEP instruction to be executed. Conditions TOSC based, VREF 3.0V TOSC based, VREF 2.0V A/D RC mode A/D RC mode
134
TGO
Q4 to A/D Clock Start
--
TOSC/2
--
--
* Note 1: 2:
These parameters are characterized but not tested. Data in "Typ" column is at 5V, 25C unless otherwise stated. These parameters are for design guidance only and are not tested. This specification ensured by design. ADRES register may be read on the following TCY cycle. See Section 11.1 "A/D Acquisition Requirements" for minimum conditions.
DS39598E-page 142
2004 Microchip Technology Inc.
PIC16F818/819
16.0
Note:
DC AND AC CHARACTERISTICS GRAPHS AND TABLES
The graphs and tables provided following this note are a statistical summary based on a limited number of samples and are provided for informational purposes only. The performance characteristics listed herein are not tested or guaranteed. In some graphs or tables, the data presented may be outside the specified operating range (e.g., outside specified power supply range) and therefore, outside the warranted range.
"Typical" represents the mean of the distribution at 25C. "Maximum" or "minimum" represents (mean + 3) or (mean - 3) respectively, where is a standard deviation, over the whole temperature range.
FIGURE 16-1:
7
TYPICAL IDD vs. FOSC OVER VDD (HS MODE)
6
Typical: statistical mean @ 25C Maximum: mean + 3 (-40C to +125C) Minimum: mean - 3 (-40C to +125C)
5.5V
5
5.0V
4.5V IDD (mA) 4 4.0V 3.5V 3.0V 2 2.5V 2.0V 1
3
0 4 6 8 10 12 FOSC (MHz) 14 16 18 20
FIGURE 16-2:
8
MAXIMUM IDD vs. FOSC OVER VDD (HS MODE)
Typical: statistical mean @ 25C Maximum: mean + 3 (-40C to +125C) Minimum: mean - 3 (-40C to +125C)
5.5V
7
6 5.0V 5 IDD (mA) 4.5V 4.0V 4 3.5V 3.0V 3 2.5V 2 2.0V
1
0 4 6 8 10 12 FOSC (MHz) 14 16 18 20
2004 Microchip Technology Inc.
DS39598E-page 143
PIC16F818/819
FIGURE 16-3:
1.8
TYPICAL IDD vs. FOSC OVER VDD (XT MODE)
1.6
Typical: statistical mean @ 25C Maximum: mean + 3 (-40C to +125C) Minimum: mean - 3 (-40C to +125C)
5.5V 5.0V
1.4
1.2
4.5V 4.0V
IDD (mA)
1.0 3.5V 0.8 3.0V 2.5V 0.6 2.0V 0.4
0.2
0.0 0 500 1000 1500 2000 FOSC (MHz) 2500 3000 3500 4000
FIGURE 16-4:
2.5
MAXIMUM IDD vs. FOSC OVER VDD (XT MODE)
Typical: statistical mean @ 25C Maximum: mean + 3 (-40C to +125C) Minimum: mean - 3 (-40C to +125C)
2.0 5.5V 5.0V 1.5 IDD (mA) 4.5V 4.0V 3.5V 1.0 3.0V 2.5V 2.0V 0.5
0.0 0 500 1000 1500 2000 FOSC (MHz) 2500 3000 3500 4000
DS39598E-page 144
2004 Microchip Technology Inc.
PIC16F818/819
FIGURE 16-5:
70
TYPICAL IDD vs. FOSC OVER VDD (LP MODE)
60
Typical: statistical mean @ 25C Maximum: mean + 3 (-40C to +125C) Minimum: mean - 3 (-40C to +125C)
5.5V
50
5.0V 4.5V
40 IDD (uA) 4.0V 3.5V 30 3.0V 2.5V 20 2.0V
10
0 20 30 40 50 60 FOSC (kHz) 70 80 90 100
FIGURE 16-6:
120
MAXIMUM IDD vs. FOSC OVER VDD (LP MODE)
100
Typical: statistical mean @ 25C Maximum: mean + 3 (-40C to +125C) Minimum: mean - 3 (-40C to +125C)
5.5V
5.0V
80
4.5V
4.0V IDD (uA) 60 3.5V 3.0V 2.5V 40 2.0V
20
0 20 30 40 50 60 FOSC (kHz) 70 80 90 100
2004 Microchip Technology Inc.
DS39598E-page 145
PIC16F818/819
FIGURE 16-7:
1.6
TYPICAL IDD vs. VDD, -40C TO +125C, 1 MHz TO 8 MHz (RC_RUN MODE, ALL PERIPHERALS DISABLED)
1.4
Typical: statistical mean @ 25C Maximum: mean + 3 (-40C to +125C) Minimum: mean - 3 (-40C to +125C)
5.5V
5.0V 1.2 4.5V 1.0 4.0V IDD (mA) 0.8 3.5V 3.0V 0.6 2.5V 0.4 2.0V
0.2
0.0 1.0 2.0 3.0 4.0 FOSC (MHz) 5.0 6.0 7.0 8.0
FIGURE 16-8:
MAXIMUM IDD vs. VDD, -40C TO +125C, 1 MHz TO 8 MHz (RC_RUN MODE, ALL PERIPHERALS DISABLED)
4.5
4.0
Typical: statistical mean @ 25C Maximum: mean + 3 (-40C to +125C) Minimum: mean - 3 (-40C to +125C)
5.5V 5.0V 4.5V 4.0V 3.5V
3.5
3.0
IDD (mA)
2.5
2.0 3.0V 1.5 2.5V 2.0V
1.0
0.5
0.0 1.0 2.0 3.0 4.0 FOSC (MHz) 5.0 6.0 7.0 8.0
DS39598E-page 146
2004 Microchip Technology Inc.
PIC16F818/819
FIGURE 16-9:
100
IPD vs. VDD, -40C TO +125C (SLEEP MODE, ALL PERIPHERALS DISABLED)
Max (125C) 10
Max (85C) 1 IPD (uA) 0.1 0.01 Typ (25C)
Typical: statistical mean @ 25C Maximum: mean + 3 (-40C to +125C) Minimum: mean - 3 (-40C to +125C)
0.001 2.0 2.5 3.0 3.5 VDD (V) 4.0 4.5 5.0 5.5
FIGURE 16-10:
4.5
AVERAGE FOSC vs. VDD FOR VARIOUS VALUES OF R (RC MODE, C = 20 pF, +25C)
Operation above 4 MHz is not recommended 4.0 5.1 kOhm 3.5
3.0
Freq (MHz)
2.5 10 kOhm 2.0
1.5
1.0
0.5
100 kOhm
0.0 2.0 2.5 3.0 3.5 VDD (V) 4.0 4.5 5.0 5.5
2004 Microchip Technology Inc.
DS39598E-page 147
PIC16F818/819
FIGURE 16-11: AVERAGE FOSC vs. VDD FOR VARIOUS VALUES OF R (RC MODE, C = 100 pF, +25C)
2.5
2.0 3.3 kOhm
1.5 Freq (MHz) 5.1 kOhm
1.0 10 kOhm
0.5
100 kOhm 0.0 2.0 2.5 3.0 3.5 VDD (V) 4.0 4.5 5.0 5.5
FIGURE 16-12:
AVERAGE FOSC vs. VDD FOR VARIOUS VALUES OF R (RC MODE, C = 300 pF, +25C)
0.9
0.8 3.3 kOhm 0.7
0.6 5.1 kOhm Freq (MHz) 0.5
0.4 10 kOhm 0.3
0.2
0.1 100 kOhm 0.0 2.0 2.5 3.0 3.5 VDD (V) 4.0 4.5 5.0 5.5
DS39598E-page 148
2004 Microchip Technology Inc.
PIC16F818/819
FIGURE 16-13: IPD TIMER1 OSCILLATOR, -10C TO +70C (SLEEP MODE, TMR1 COUNTER DISABLED) SLEEP mode, TMR1 counter disabled IPD Timer1 Oscillator, -10C to +70C
5.0
4.5 Max (-10C to +70C) 4.0
3.5
3.0 Typ (+25C)
IPD (A)
2.5
2.0
1.5
1.0
Typical: statistical mean @ 25C Maximum: mean + 3 (-40C to +125C) Minimum: mean - 3 (-40C to +125C)
0.5
0.0 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5
VDD (V)
FIGURE 16-14:
18
IPD WDT, -40C TO +125C (SLEEP MODE, ALL PERIPHERALS DISABLED)
16
Typical: statistical mean @ 25C Maximum: mean + 3 (-40C to +125C) Minimum: mean - 3 (-40C to +125C)
14
12
IWDT (A)
10 Max (-40C to +125C) 8
6 Max (-40C to +85C) 4
2 Typ (25C) 0 2.0 2.5 3.0 3.5 VDD (V) 4.0 4.5 5.0 5.5
2004 Microchip Technology Inc.
DS39598E-page 149
PIC16F818/819
FIGURE 16-15: IPD BOR vs. VDD, -40C TO +125C (SLEEP MODE, BOR ENABLED AT 2.00V-2.16V)
1,000
Max (125C)
Typ (25C) Indeterminant State Device in Reset 100 Device in Sleep
IDD (A)
Note:
Device current in Reset depends on oscillator mode, frequency and circuit.
Max (125C)
Typical: statistical mean @ 25C Maximum: mean + 3 (-40C to +125C) Minimum: mean - 3 (-40C to +125C)
10 2.0 2.5 3.0 3.5 VDD (V) 4.0 4.5
Typ (25C)
5.0
5.5
FIGURE 16-16:
12
IPD A/D, -40C TO +125C, SLEEP MODE, A/D ENABLED (NOT CONVERTING)
10
Typical: statistical mean @ 25C Maximum: mean + 3 (-40C to +125C) Minimum: mean - 3 (-40C to +125C)
Max (-40C to +125C) 8
IPD (A)
6
4
Max (-40C to +85C) 2
Typ (+25C) 0 2.0 2.5 3.0 3.5 VDD (V) 4.0 4.5 5.0 5.5
DS39598E-page 150
2004 Microchip Technology Inc.
PIC16F818/819
FIGURE 16-17:
5.5 5.0 4.5 4.0 Max 3.5 Typ (25C) VOH (V) 3.0 2.5 Min 2.0 1.5 1.0 0.5 0.0 0 5 10 IOH (-mA) 15 20 25
TYPICAL, MINIMUM AND MAXIMUM VOH vs. IOH (VDD = 5V, -40C TO +125C)
Typical: statistical mean @ 25C Maximum: mean + 3 (-40C to +125C) Minimum: mean - 3 (-40C to +125C)
FIGURE 16-18:
3.5
TYPICAL, MINIMUM AND MAXIMUM VOH vs. IOH (VDD = 3V, -40C TO +125C)
3.0
Typical: statistical mean @ 25C Maximum: mean + 3 (-40C to +125C) Minimum: mean - 3 (-40C to +125C)
2.5 Max
2.0 VOH (V) Typ (25C) 1.5 Min 1.0
0.5
0.0 0 5 10 IOH (-mA) 15 20 25
2004 Microchip Technology Inc.
DS39598E-page 151
PIC16F818/819
FIGURE 16-19:
1.0
TYPICAL, MINIMUM AND MAXIMUM VOL vs. IOL (VDD = 5V, -40C TO +125C)
0.9 Max (125C) 0.8
Typical: statistical mean @ 25C Maximum: mean + 3 (-40C to +125C) Minimum: mean - 3 (-40C to +125C)
0.7 Max (85C)
0.6 VOL (V)
0.5 Typ (25C) 0.4
0.3
Min (-40C)
0.2
0.1
0.0 0 5 10 IOL (-mA) 15 20 25
FIGURE 16-20:
3.0
TYPICAL, MINIMUM AND MAXIMUM VOL vs. IOL (VDD = 3V, -40C TO +125C)
Max (125C) 2.5
Typical: statistical mean @ 25C Maximum: mean + 3 (-40C to +125C) Minimum: mean - 3 (-40C to +125C)
2.0
VOL (V)
1.5 Max (85C)
1.0 Typ (25C)
0.5
Min (-40C)
0.0 0 5 10 IOL (-mA) 15 20 25
DS39598E-page 152
2004 Microchip Technology Inc.
PIC16F818/819
FIGURE 16-21:
1.5
MINIMUM AND MAXIMUM VIN vs. VDD (TTL INPUT, -40C TO +125C)
1.4
1.3
Typical: statistical mean @ 25C Maximum: mean + 3 (-40C to +125C) Minimum: mean - 3 (-40C to +125C)
VTH Max (-40C)
1.2
1.1 VTH Typ (25C) VIN (V) 1.0
0.9
VTH Min (125C)
0.8
0.7
0.6
0.5 2.0 2.5 3.0 3.5 VDD (V) 4.0 4.5 5.0 5.5
FIGURE 16-22:
4.0
MINIMUM AND MAXIMUM VIN vs. VDD (ST INPUT, -40C TO +125C)
3.5
Typical: statistical mean @ 25C Maximum: mean + 3 (-40C to +125C) Minimum: mean - 3 (-40C to +125C)
VIH Max (125C)
3.0
2.5
VIN (V)
VIH Min (-40C)
2.0
VIL Max (-40C)
1.5
1.0
VIL Min (125C)
0.5
0.0 2.0 2.5 3.0 3.5 VDD (V) 4.0 4.5 5.0 5.5
2004 Microchip Technology Inc.
DS39598E-page 153
PIC16F818/819
FIGURE 16-23:
3.5 VIH Max 3.0
MINIMUM AND MAXIMUM VIN vs. VDD (I2CTM INPUT, -40C TO +125C)
Typical: statistical mean @ 25C Maximum: mean + 3 (-40C to +125C) Minimum: mean - 3 (-40C to +125C)
2.5
2.0 VIN (V)
VIL Max VILMax
VIH Min
1.5
1.0 VIL Min 0.5
0.0 2.0 2.5 3.0 3.5 VDD (V) 4.0 4.5 5.0 5.5
FIGURE 16-24:
4
A/D NONLINEARITY vs. VREFH (VDD = VREFH, -40C TO +125C)
3.5
-40C -40C
Differential or Integral Nonlinearity (LSB) 3
+25C 25C
2.5
+85C 85C
2
1.5
1
0.5
+125C 125C
0 2 2.5 3 3.5 4 4.5 5 5.5 VDD and VREFH (V)
DS39598E-page 154
2004 Microchip Technology Inc.
PIC16F818/819
FIGURE 16-25:
3
A/D NONLINEARITY vs. VREFH (VDD = 5V, -40C TO +125C)
2.5 Differential or Integral Nonlinearilty (LSB)
2
1.5
Max (-40Cto 125C) Max (-40C to +125C)
1
Typ (+25C) Typ (25C)
0.5
0 2 2.5 3 3.5 VREFH (V) 4 4.5 5 5.5
2004 Microchip Technology Inc.
DS39598E-page 155
PIC16F818/819
NOTES:
DS39598E-page 156
2004 Microchip Technology Inc.
PIC16F818/819
17.0
17.1
PACKAGING INFORMATION
Package Marking Information
18-Lead PDIP
XXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXX YYWWNNN
Example
PIC16F818-I/P 0410017
18-Lead SOIC
XXXXXXXXXXXX XXXXXXXXXXXX XXXXXXXXXXXX YYWWNNN
Example
PIC16F818-04 /SO 0410017
20-Lead SSOP XXXXXXXXXXX XXXXXXXXXXX YYWWNNN
Example PIC16F81820/SS 0410017
28-Lead QFN
Example
XXXXXXXX XXXXXXXX YYWWNNN
16F818I/ML 0410017
Legend: XX...X Y YY WW NNN
Customer specific information* Year code (last digit of calendar year) Year code (last 2 digits of calendar year) Week code (week of January 1 is week `01') Alphanumeric traceability code
Note:
In the event the full Microchip part number cannot be marked on one line, it will be carried over to the next line thus limiting the number of available characters for customer specific information.
*
Standard PICmicro device marking consists of Microchip part number, year code, week code and traceability code. For PICmicro device marking beyond this, certain price adders apply. Please check with your Microchip Sales Office. For QTP devices, any special marking adders are included in QTP price.
2004 Microchip Technology Inc.
DS39598E-page 157
PIC16F818/819
18-Lead Plastic Dual In-line (P) - 300 mil Body (PDIP)
E1
D
2 n 1
E
A2 A L A1 B1
c
eB Units Dimension Limits n p
B
p
MIN
Number of Pins Pitch Top to Seating Plane A .140 .170 Molded Package Thickness A2 .115 .145 Base to Seating Plane A1 .015 Shoulder to Shoulder Width E .300 .313 .325 Molded Package Width E1 .240 .250 .260 Overall Length D .890 .898 .905 Tip to Seating Plane L .125 .130 .135 c Lead Thickness .008 .012 .015 Upper Lead Width B1 .045 .058 .070 Lower Lead Width B .014 .018 .022 Overall Row Spacing eB .310 .370 .430 Mold Draft Angle Top 5 10 15 Mold Draft Angle Bottom 5 10 15 * Controlling Parameter Significant Characteristic Notes: Dimensions D and E1 do not include mold flash or protrusions. Mold flash or protrusions shall not exceed .010" (0.254mm) per side. JEDEC Equivalent: MS-001 Drawing No. C04-007
INCHES* NOM 18 .100 .155 .130
MAX
MIN
MILLIMETERS NOM 18 2.54 3.56 3.94 2.92 3.30 0.38 7.62 7.94 6.10 6.35 22.61 22.80 3.18 3.30 0.20 0.29 1.14 1.46 0.36 0.46 7.87 9.40 5 10 5 10
MAX
4.32 3.68 8.26 6.60 22.99 3.43 0.38 1.78 0.56 10.92 15 15
DS39598E-page 158
2004 Microchip Technology Inc.
PIC16F818/819
18-Lead Plastic Small Outline (SO) - Wide, 300 mil Body (SOIC)
E p E1
D
2 B n 1
h
45
c A A2
L A1
Number of Pins Pitch Overall Height Molded Package Thickness Standoff Overall Width Molded Package Width Overall Length Chamfer Distance Foot Length Foot Angle Lead Thickness Lead Width Mold Draft Angle Top Mold Draft Angle Bottom * Controlling Parameter Significant Characteristic
Units Dimension Limits n p A A2 A1 E E1 D h L c B
MIN
.093 .088 .004 .394 .291 .446 .010 .016 0 .009 .014 0 0
INCHES* NOM 18 .050 .099 .091 .008 .407 .295 .454 .020 .033 4 .011 .017 12 12
MAX
MIN
.104 .094 .012 .420 .299 .462 .029 .050 8 .012 .020 15 15
MILLIMETERS NOM 18 1.27 2.36 2.50 2.24 2.31 0.10 0.20 10.01 10.34 7.39 7.49 11.33 11.53 0.25 0.50 0.41 0.84 0 4 0.23 0.27 0.36 0.42 0 12 0 12
MAX
2.64 2.39 0.30 10.67 7.59 11.73 0.74 1.27 8 0.30 0.51 15 15
Notes: Dimensions D and E1 do not include mold flash or protrusions. Mold flash or protrusions shall not exceed .010" (0.254mm) per side. JEDEC Equivalent: MS-013 Drawing No. C04-051
2004 Microchip Technology Inc.
DS39598E-page 159
PIC16F818/819
20-Lead Plastic Shrink Small Outline (SS) - 209 mil Body, 5.30 mm (SSOP)
E E1 p
D
B n
2 1
c A
A2
f L A1
Number of Pins Pitch Overall Height A .079 Molded Package Thickness A2 .065 .073 Standoff A1 .002 Overall Width E .291 .323 Molded Package Width E1 .197 .220 Overall Length D .272 .289 Foot Length L .022 .037 c Lead Thickness .004 .010 f Foot Angle 0 8 Lead Width B .009 .015 *Controlling Parameter Notes: Dimensions D and E1 do not include mold flash or protrusions. Mold flash or protrusions shall not exceed .010" (0.254mm) per side. JEDEC Equivalent: MO-150
Drawing No. C04-072
Units Dimension Limits n p
MIN
INCHES NOM 20 .026 .069 .307 .209 .283 .030 4 -
MAX
MIN
MILLIMETERS* NOM 20 0.65 1.65 1.75 0.05 7.40 7.80 5.00 5.30 .295 7.20 0.55 0.75 0.09 0 4 0.22 -
MAX
2.00 1.85 8.20 5.60 7.50 0.95 0.25 8 0.38
Revised 11/03/03
DS39598E-page 160
2004 Microchip Technology Inc.
PIC16F818/819
28-Lead Plastic Quad Flat No Lead Package (ML) 6x6 mm Body (QFN) - With 0.55 mm Contact Length (Saw Singulated)
E
EXPOSED METAL PAD
E2
e
D
D2
2 1 n
b
TOP VIEW
OPTIONAL INDEX AREA
ALTERNATE INDEX INDICATORS
SEE DETAIL
L
BOTTOM VIEW
A1 A
DETAIL ALTERNATE PAD OUTLINE
Number of Pins Pitch Overall Height Standoff Contact Thickness Overall Width Exposed Pad Width Overall Length Exposed Pad Length Contact Width Contact Length
Units Dimension Limits n e A A1 A3 E E2 D D2 b L
MIN
.031 .000 .232 .140 .232 .140 .009 .020
INCHES NOM 28 .026 BSC .035 .001 .008 REF .236 .146 .236 .146 .011 .024
MAX
MIN
.039 .002 .240 .152 .240 .152 .013 .028
0.80 0.00 5.90 3.55 5.90 3.55 0.23 0.50
MILLIMETERS* NOM 28 0.65 BSC 0.90 0.02 0.20 REF 6.00 3.70 6.00 3.70 0.28 0.60
MAX
1.00 0.05 6.10 3.85 6.10 3.85 0.33 0.70
*Controlling Parameter Notes: JEDEC equivalent: MO-220
Drawing No. C04-105 Revised 05-24-04
2004 Microchip Technology Inc.
DS39598E-page 161
PIC16F818/819
NOTES:
DS39598E-page 162
2004 Microchip Technology Inc.
PIC16F818/819
APPENDIX A: REVISION HISTORY
Revision D (November 2003)
Updated IRCF bit modification information and changed the INTOSC stabilization delay from 1 ms to 4 ms in Section 4.0 "Oscillator Configurations". Updated Section 12.17 "In-Circuit Serial Programming" to clarify LVP programming. In Section 15.0 "Electrical Characteristics", the DC Characteristics (Section 15.2 and Section 15.3) have been updated to include the Typ, Min and Max values and Table 15-1 "External Clock Timing Requirements" has been updated.
Revision A (May 2002)
Original version of this data sheet.
Revision B (August 2002)
Added INTRC section. PWRT and BOR are independent of each other. Revised program memory text and code routine. Added QFN package. Modified PORTB diagrams.
Revision E (September 2004) Revision C (November 2002)
Added various new feature descriptions. Added internal RC oscillator specifications. Added low-power Timer1 specifications and RTC application example. This revision includes the DC and AC Characteristics Graphs and Tables. The Electrical Specifications in Section 16.0 "DC and AC Characteristics Graphs and Tables" have been updated and there have been minor corrections to the data sheet text.
APPENDIX B:
DEVICE DIFFERENCES
The differences between the devices in this data sheet are listed in Table B-1.
TABLE B-1:
DIFFERENCES BETWEEN THE PIC16F818 AND PIC16F819
Features PIC16F818 1K 128 128 PIC16F819 2K 256 256
Flash Program Memory (14-bit words) Data Memory (bytes) EEPROM Data Memory (bytes)
2004 Microchip Technology Inc.
DS39598E-page 163
PIC16F818/819
NOTES:
DS39598E-page 164
2004 Microchip Technology Inc.
PIC16F818/819
INDEX
A
A/D Acquisition Requirements .......................................... 84 ADIF Bit ...................................................................... 83 Analog-to-Digital Converter ........................................ 81 Associated Registers ................................................. 87 Calculating Acquisition Time ...................................... 84 Configuring Analog Port Pins ..................................... 85 Configuring the Interrupt ............................................ 83 Configuring the Module .............................................. 83 Conversion Clock ....................................................... 85 Conversion Requirements ....................................... 142 Conversions ............................................................... 86 Converter Characteristics ........................................ 141 Delays ........................................................................ 84 Effects of a Reset ....................................................... 87 GO/DONE Bit ............................................................. 83 Internal Sampling Switch (Rss) Impedance ............... 84 Operation During Sleep ............................................. 87 Result Registers ......................................................... 86 Source Impedance ..................................................... 84 Time Delays ............................................................... 84 Use of the CCP Trigger .............................................. 87 Absolute Maximum Ratings ............................................. 117 ACK .................................................................................... 77 ADCON0 Register .............................................................. 81 ADCON1 Register .............................................................. 81 ADRESH Register ........................................................ 13, 81 ADRESH, ADRESL Register Pair ...................................... 83 ADRESL Register ........................................................ 14, 81 Application Notes AN556 (Implementing a Table Read) ........................ 23 AN578 (Use of the SSP Module in the I2C Multi-Master Environment) ........................... 71 AN607 (Power-up Trouble Shooting) ......................... 92 Assembler MPASM Assembler .................................................. 111 RB5 Pin ..................................................................... 50 RB6 Pin ..................................................................... 51 RB7 Pin ..................................................................... 52 Recommended MCLR Circuit .................................... 92 SSP in I2C Mode ........................................................ 76 SSP in SPI Mode ....................................................... 74 System Clock ............................................................. 38 Timer0/WDT Prescaler .............................................. 53 Timer1 ....................................................................... 58 Timer2 ....................................................................... 63 Watchdog Timer (WDT) ............................................. 98 BOR. See Brown-out Reset. Brown-out Reset (BOR) .............................. 89, 91, 92, 93, 94
C
C Compilers MPLAB C17 ............................................................. 112 MPLAB C18 ............................................................. 112 MPLAB C30 ............................................................. 112 Capture/Compare/PWM (CCP) ......................................... 65 Capture Mode ............................................................ 66 CCP Prescaler ................................................... 66 Pin Configuration ............................................... 66 Software Interrupt .............................................. 66 Timer1 Mode Selection ...................................... 66 Capture, Compare and Timer1 Associated Registers ......................................... 67 CCP1IF ...................................................................... 66 CCPR1 ...................................................................... 66 CCPR1H:CCPR1L ..................................................... 66 Compare Mode .......................................................... 67 Pin Configuration ............................................... 67 Software Interrupt Mode .................................... 67 Special Event Trigger ........................................ 67 Special Event Trigger Output of CCP1 ......................................... 67 Timer1 Mode Selection ...................................... 67 PWM and Timer2 Associated Registers ......................................... 69 PWM Mode ................................................................ 68 Duty Cycle ......................................................... 68 Example Frequencies/Resolutions .................... 69 Period ................................................................ 68 Setup for Operation ........................................... 69 Timer Resources ....................................................... 65 CCP1M0 Bit ....................................................................... 65 CCP1M1 Bit ....................................................................... 65 CCP1M2 Bit ....................................................................... 65 CCP1M3 Bit ....................................................................... 65 CCP1X Bit .......................................................................... 65 CCP1Y Bit .......................................................................... 65 CCPR1H Register .............................................................. 65 CCPR1L Register .............................................................. 65 Code Examples Changing Between Capture Prescalers ..................... 66 Changing Prescaler Assignment from Timer0 to WDT .................................................. 55 Changing Prescaler Assignment from WDT to Timer0 .................................................. 55 Clearing RAM Using Indirect Addressing .................. 23 Erasing a Flash Program Memory Row ..................... 29 Implementing a Real-Time Clock Using a Timer1 Interrupt Service ................................. 62 Initializing PORTA ...................................................... 39 Reading a 16-Bit Free Running Timer ....................... 59
B
BF Bit ................................................................................. 77 Block Diagrams A/D ............................................................................. 83 Analog Input Model .................................................... 84 Capture Mode Operation ........................................... 66 Compare Mode Operation ......................................... 67 In-Circuit Serial Programming Connections ..................................................... 101 Interrupt Logic ............................................................ 96 On-Chip Reset Circuit ................................................ 91 PIC16F818/819 ............................................................ 6 PWM .......................................................................... 68 RA0/AN0:RA1/AN1 Pins ............................................ 40 RA2/AN2/VREF- Pin .................................................... 40 RA3/AN3/VREF+ Pin ................................................... 40 RA4/AN4/T0CKI Pin ................................................... 40 RA5/MCLR/VPP Pin ................................................... 41 RA6/OSC2/CLKO Pin ................................................ 41 RA7/OSC1/CLKI Pin .................................................. 42 RB0 Pin ...................................................................... 45 RB1 Pin ...................................................................... 46 RB2 Pin ...................................................................... 47 RB3 Pin ...................................................................... 48 RB4 Pin ...................................................................... 49
2004 Microchip Technology Inc.
DS39598E-page 165
PIC16F818/819
Reading Data EEPROM ............................................. 27 Reading Flash Program Memory ............................... 28 Saving Status and W Registers in RAM ..................... 97 Writing a 16-Bit Free Running Timer .......................... 59 Writing to Data EEPROM ........................................... 27 Writing to Flash Program Memory ............................. 31 Code Protection ......................................................... 89, 100 Computed GOTO ............................................................... 23 Configuration Bits ............................................................... 89 Crystal Oscillator and Ceramic Resonators ....................... 33
F
Flash Program Memory ..................................................... 25 Associated Registers ................................................. 32 EEADR Register ........................................................ 25 EEADRH Register ..................................................... 25 EECON1 Register ...................................................... 25 EECON2 Register ...................................................... 25 EEDATA Register ...................................................... 25 EEDATH Register ...................................................... 25 Erasing ....................................................................... 28 Reading ..................................................................... 28 Writing ........................................................................ 30 FSR Register .................................................... 13, 14, 15, 23
D
Data EEPROM Memory ..................................................... 25 Associated Registers ................................................. 32 EEADR Register ........................................................ 25 EEADRH Register ...................................................... 25 EECON1 Register ...................................................... 25 EECON2 Register ...................................................... 25 EEDATA Register ...................................................... 25 EEDATH Register ...................................................... 25 Operation During Code-Protect .................................. 32 Protection Against Spurious Writes ............................ 32 Reading ...................................................................... 27 Write Interrupt Enable Flag (EEIF Bit) ........................ 25 Writing ........................................................................ 27 Data Memory Special Function Registers ........................................ 13 DC and AC Characteristics Graphs and Tables ................................................... 143 DC Characteristics Internal RC Accuracy ............................................... 127 PIC16F818/819, PIC16LF818/819 ........................... 128 Power-Down and Supply Current ............................. 120 Supply Voltage ......................................................... 119 Demonstration Boards PICDEM 1 ................................................................ 114 PICDEM 17 .............................................................. 115 PICDEM 18R ............................................................ 115 PICDEM 2 Plus ........................................................ 114 PICDEM 3 ................................................................ 114 PICDEM 4 ................................................................ 114 PICDEM LIN ............................................................. 115 PICDEM USB ........................................................... 115 PICDEM.net Internet/Ethernet ................................. 114 Development Support ...................................................... 111 Device Differences ........................................................... 163 Device Overview .................................................................. 5 Direct Addressing ............................................................... 24
G
General Purpose Register File ........................................... 10
I
I/O Ports ............................................................................. 39 I2C Associated Registers ................................................. 79 Master Mode Operation ............................................. 79 Mode .......................................................................... 76 Mode Selection .......................................................... 76 Multi-Master Mode Operation .................................... 79 Slave Mode ................................................................ 77 Addressing ......................................................... 77 Reception .......................................................... 77 SCL, SDA Pins .................................................. 77 Transmission ..................................................... 77 ID Locations ................................................................89, 100 In-Circuit Debugger .......................................................... 100 In-Circuit Serial Programming ............................................ 89 In-Circuit Serial Programming (ICSP) .............................. 101 INDF Register .........................................................14, 15, 23 Indirect Addressing .......................................................23, 24 Instruction Format ............................................................ 103 Instruction Set .................................................................. 103 ADDLW .................................................................... 105 ADDWF .................................................................... 105 ANDLW .................................................................... 105 ANDWF .................................................................... 105 BCF .......................................................................... 105 BSF .......................................................................... 105 BTFSC ..................................................................... 106 BTFSS ..................................................................... 106 CALL ........................................................................ 106 CLRF ....................................................................... 106 CLRW ...................................................................... 106 CLRWDT ................................................................. 106 COMF ...................................................................... 107 DECF ....................................................................... 107 DECFSZ .................................................................. 107 Descriptions ............................................................. 105 GOTO ...................................................................... 107 INCF ........................................................................ 107 INCFSZ .................................................................... 107 IORLW ..................................................................... 108 IORWF ..................................................................... 108 MOVF ...................................................................... 108 MOVLW ................................................................... 108 MOVWF ................................................................... 108
E
EEADR Register ................................................................ 25 EEADRH Register .............................................................. 25 EECON1 Register .............................................................. 25 EECON2 Register .............................................................. 25 EEDATA Register .............................................................. 25 EEDATH Register .............................................................. 25 Electrical Characteristics .................................................. 117 Endurance ............................................................................ 1 Errata ................................................................................... 3 Evaluation and Programming Tools ................................. 115 External Clock Input ........................................................... 34 External Interrupt Input (RB0/INT). See Interrupt Sources.
DS39598E-page 166
2004 Microchip Technology Inc.
PIC16F818/819
NOP ......................................................................... 108 Read-Modify-Write Operations ................................ 103 RETFIE .................................................................... 109 RETLW .................................................................... 109 RETURN .................................................................. 109 RLF .......................................................................... 109 RRF .......................................................................... 109 SLEEP ..................................................................... 109 SUBLW .................................................................... 110 SUBWF .................................................................... 110 Summary Table ........................................................ 104 SWAPF .................................................................... 110 XORLW .................................................................... 110 XORWF .................................................................... 110 INT Interrupt (RB0/INT). See Interrupt Sources. INTCON Register ............................................................... 15 GIE Bit ........................................................................ 18 INTE Bit ...................................................................... 18 INTF Bit ...................................................................... 18 RBIF Bit ...................................................................... 18 TMR0IE Bit ................................................................. 18 Internal Oscillator Block ..................................................... 35 INTRC Modes ............................................................ 35 Interrupt Sources .......................................................... 89, 96 RB0/INT Pin, External ................................................ 97 TMR0 Overflow .......................................................... 97 Interrupts RB7:RB4 Port Change ............................................... 43 Synchronous Serial Port Interrupt .............................. 20 Interrupts, Context Saving During ...................................... 97 Interrupts, Enable Bits Global Interrupt Enable (GIE Bit) ............................... 96 Interrupt-on-Change (RB7:RB4) Enable (RBIE Bit) ............................................... 97 RB0/INT Enable (INTE Bit) ........................................ 18 TMR0 Overflow Enable (TMR0IE Bit) ........................ 18 Interrupts, Enable bits Global Interrupt Enable (GIE Bit) ............................... 18 Interrupts, Flag Bits Interrupt-on-Change (RB7:RB4) Flag (RBIF Bit) ..................................................... 18, 97 RB0/INT Flag (INTF Bit) ............................................. 18 TMR0 Overflow Flag (TMR0IF Bit) ............................. 97 INTRC Modes Adjustment ................................................................. 36 MPLAB Integrated Development Environment Software ............................................. 111 MPLAB PM3 Device Programmer ................................... 113 MPLINK Object Linker/ MPLIB Object Librarian ............................................ 112
O
Opcode Field Descriptions ............................................... 103 OPTION_REG Register ..................................................... 15 INTEDG Bit ...........................................................17, 54 PS2:PS0 Bits ............................................................. 17 PSA Bit ...................................................................... 17 RBPU Bit ..............................................................17, 54 T0CS Bit .................................................................... 17 T0SE Bit .................................................................... 17 Oscillator Configuration ..................................................... 33 ECIO .......................................................................... 33 EXTCLK ..................................................................... 93 EXTRC ...................................................................... 93 HS .........................................................................33, 93 INTIO1 ....................................................................... 33 INTIO2 ....................................................................... 33 INTRC ........................................................................ 93 LP .........................................................................33, 93 RC ........................................................................33, 35 RCIO .......................................................................... 33 XT .........................................................................33, 93 Oscillator Control Register ................................................. 37 Modifying IRCF Bits ................................................... 37 Clock Transition Sequence ................................ 37 Oscillator Start-up Timer (OST) ....................................89, 92 Oscillator, WDT .................................................................. 98
P
Packaging Information ..................................................... 157 Marking .................................................................... 157 PCFG0 Bit .......................................................................... 82 PCFG1 Bit .......................................................................... 82 PCFG2 Bit .......................................................................... 82 PCFG3 Bit .......................................................................... 82 PCL Register .................................................... 13, 14, 15, 23 PCLATH Register ............................................. 13, 14, 15, 23 PCON Register .................................................................. 93 POR Bit ...................................................................... 22 PICkit 1 Flash Starter Kit ................................................. 115 PICSTART Plus Development Programmer ............................................................. 114 Pinout Descriptions PIC16F818/819 ........................................................... 7 Pointer, FSR ...................................................................... 23 POP ................................................................................... 23 POR. See Power-on Reset. PORTA ................................................................................ 7 Associated Register Summary .................................. 39 Functions ................................................................... 39 PORTA Register ........................................................ 39 TRISA Register .......................................................... 39 PORTA Register ................................................................ 13
L
Loading of PC .................................................................... 23 Low-Voltage ICSP Programming ..................................... 102
M
Master Clear (MCLR) MCLR Reset, Normal Operation .....................91, 93, 94 MCLR Reset, Sleep ........................................91, 93, 94 Operation and ESD Protection ................................... 92 Memory Organization ........................................................... 9 Data Memory ............................................................. 10 Program Memory ......................................................... 9 MPLAB ASM30 Assembler, Linker, Librarian .................. 112 MPLAB ICD 2 In-Circuit Debugger ................................... 113 MPLAB ICE 2000 High-Performance Universal In-Circuit Emulator ................................... 113 MPLAB ICE 4000 High-Performance Universal In-Circuit Emulator ................................... 113
2004 Microchip Technology Inc.
DS39598E-page 167
PIC16F818/819
PORTB ................................................................................. 8 Associated Register Summary ................................... 44 Functions .................................................................... 44 PORTB Register ........................................................ 43 Pull-up Enable (RBPU Bit) ................................... 17, 54 RB0/INT Edge Select (INTEDG Bit) ..................... 17, 54 RB0/INT Pin, External ................................................ 97 RB7:RB4 Interrupt-on-Change ................................... 97 RB7:RB4 Interrupt-on-Change Enable (RBIE Bit) ............................................... 97 RB7:RB4 Interrupt-on-Change Flag (RBIF Bit) ............................................. 18, 97 TRISB Register .......................................................... 43 PORTB Register .......................................................... 13, 15 Postscaler, WDT Assignment (PSA Bit) ................................................. 17 Rate Select (PS2:PS0 Bits) ........................................ 17 Power-Down Mode. See Sleep. Power-on Reset (POR) ...............................89, 91, 92, 93, 94 POR Status (POR Bit) ................................................ 22 Power Control (PCON) Register ................................ 93 Power-Down (PD Bit) ................................................. 91 Time-out (TO Bit) ................................................. 16, 91 Power-up Timer (PWRT) .............................................. 89, 92 PR2 Register ...................................................................... 63 Prescaler, Timer0 Assignment (PSA Bit) ................................................. 17 Rate Select (PS2:PS0 Bits) ........................................ 17 PRO MATE II Universal Device Programmer ................... 113 Program Counter Reset Conditions ........................................................ 93 Program Memory Interrupt Vector ............................................................ 9 Map and Stack PIC16F818 ........................................................... 9 PIC16F819 ........................................................... 9 Reset Vector ................................................................ 9 Program Verification ......................................................... 100 PUSH ................................................................................. 23 Registers ADCON0 (A/D Control 0) ........................................... 81 ADCON1 (A/D Control 1) ........................................... 82 CCP1CON (Capture/Compare/ PWM Control 1) ................................................. 65 Configuration Word .................................................... 90 EECON1 (Data EEPROM Access Control 1) ........................................................... 26 Initialization Conditions (table) ................................... 94 INTCON (Interrupt Control) ........................................ 18 OPTION_REG (Option) ........................................17, 54 OSCCON (Oscillator Control) .................................... 38 OSCTUNE (Oscillator Tuning) ................................... 36 PCON (Power Control) .............................................. 22 PIE1 (Peripheral Interrupt Enable 1) .......................... 19 PIE2 (Peripheral Interrupt Enable 2) .......................... 21 PIR1 (Peripheral Interrupt Request (Flag) 1) ............................................... 20 PIR2 (Peripheral Interrupt Request (Flag) 2) ............................................... 21 SSPCON (Synchronous Serial Port Control 1) ................................................... 73 SSPSTAT (Synchronous Serial Port Status) ........................................................ 72 Status ......................................................................... 16 T1CON (Timer1 Control) ........................................... 57 T2CON (Timer2 Control) ........................................... 64 Reset ............................................................................89, 91 Brown-out Reset (BOR). See Brown-out Reset (BOR). MCLR Reset. See MCLR. Power-on Reset (POR). See Power-on Reset (POR). Reset Conditions for All Registers ............................. 94 Reset Conditions for PCON Register ........................ 93 Reset Conditions for Program Counter ...................... 93 Reset Conditions for Status Register ......................... 93 WDT Reset. See Watchdog Timer (WDT). Revision History ............................................................... 163 RP0 Bit ............................................................................... 10 RP1 Bit ............................................................................... 10
R
R/W Bit ............................................................................... 77 RA0/AN0 Pin ........................................................................ 7 RA1/AN1 Pin ........................................................................ 7 RA2/AN2/VREF- Pin .............................................................. 7 RA3/AN3/VREF+ Pin ............................................................. 7 RA4/AN4/T0CKI Pin ............................................................. 7 RA5/MCLR/VPP Pin .............................................................. 7 RA6/OSC2/CLKO Pin .......................................................... 7 RA7/OSC1/CLKI Pin ............................................................ 7 RB0/INT Pin ......................................................................... 8 RB1/SDI/SDA Pin ................................................................. 8 RB2/SDO/CCP1 Pin ............................................................. 8 RB3/CCP1/PGM Pin ............................................................ 8 RB4/SCK/SCL Pin ................................................................ 8 RB5/SS Pin .......................................................................... 8 RB6/T1OSO/T1CKI/PGC Pin ............................................... 8 RB7/T1OSI/PGD Pin ............................................................ 8 RBIF Bit .............................................................................. 43 RCIO Oscillator Mode ........................................................ 35 Receive Overflow Indicator Bit, SSPOV ............................. 73 Register File Map PIC16F818 ................................................................. 11 PIC16F819 ................................................................. 12
S
Sales and Support ........................................................... 172 SCL Clock .......................................................................... 77 Sleep .......................................................................89, 91, 99 Software Simulator (MPLAB SIM) .................................... 112 Software Simulator (MPLAB SIM30) ................................ 112 Special Event Trigger ......................................................... 87 Special Features of the CPU ............................................. 89 Special Function Register Summary .................................. 13 Special Function Registers ................................................ 13 SPI Mode Associated Registers ................................................. 74 Serial Clock ................................................................ 71 Serial Data In ............................................................. 71 Serial Data Out .......................................................... 71 Slave Select ............................................................... 71 SSP ACK ........................................................................... 77 I2C I2C Operation ..................................................... 76 SSPADD Register .............................................................. 14 SSPIF ................................................................................ 20 SSPOV .............................................................................. 73 SSPOV Bit ......................................................................... 77
DS39598E-page 168
2004 Microchip Technology Inc.
PIC16F818/819
SSPSTAT Register ............................................................ 14 Stack .................................................................................. 23 Overflow ..................................................................... 23 Underflow ................................................................... 23 Status Register ............................................................. 13, 15 DC Bit ......................................................................... 16 IRP Bit ........................................................................ 16 PD Bit ......................................................................... 91 TO Bit ................................................................... 16, 91 Z Bit ............................................................................ 16 Synchronous Serial Port (SSP) .......................................... 71 Overview .................................................................... 71 SPI Mode ................................................................... 71 Synchronous Serial Port Interrupt ...................................... 20 I2C Bus Data ............................................................ 139 I2C Bus Start/Stop Bits ............................................ 138 I2C Reception (7-Bit Address) ................................... 78 I2C Transmission (7-Bit Address) .............................. 78 PWM Output .............................................................. 68 Reset, Watchdog Timer, Oscillator Start-up Timer and Power-up Timer ............................................... 133 Slow Rise Time (MCLR Tied to VDD Through RC Network) ........................................ 96 SPI Master Mode ....................................................... 75 SPI Master Mode (CKE = 0, SMP = 0) .................... 136 SPI Master Mode (CKE = 1, SMP = 1) .................... 136 SPI Slave Mode (CKE = 0) .................................75, 137 SPI Slave Mode (CKE = 1) .................................75, 137 Time-out Sequence on Power-up (MCLR Tied to VDD Through Pull-up Resistor) ................................................ 95 Time-out Sequence on Power-up (MCLR Tied to VDD Through RC Network): Case 1 ....... 95 Time-out Sequence on Power-up (MCLR Tied to VDD Through RC Network): Case 2 ....... 95 Timer0 and Timer1 External Clock .......................... 134 Timer1 Incrementing Edge ........................................ 58 Wake-up from Sleep through Interrupt .................... 100 Timing Parameter Symbology ......................................... 130 Timing Requirements External Clock .......................................................... 131 TMR0 Register ................................................................... 15 TMR1CS Bit ....................................................................... 57 TMR1H Register ................................................................ 13 TMR1L Register ................................................................. 13 TMR1ON Bit ...................................................................... 57 TMR2 Register ................................................................... 13 TMR2ON Bit ...................................................................... 64 TOUTPS0 Bit ..................................................................... 64 TOUTPS1 Bit ..................................................................... 64 TOUTPS2 Bit ..................................................................... 64 TOUTPS3 Bit ..................................................................... 64 TRISA Register .................................................................. 14 TRISB Register .............................................................14, 15
T
T1CKPS0 Bit ...................................................................... 57 T1CKPS1 Bit ...................................................................... 57 T1OSCEN Bit ..................................................................... 57 T1SYNC Bit ........................................................................ 57 T2CKPS0 Bit ...................................................................... 64 T2CKPS1 Bit ...................................................................... 64 Tad ..................................................................................... 85 Time-out Sequence ............................................................ 92 Timer0 ................................................................................ 53 Associated Registers ................................................. 55 Clock Source Edge Select (T0SE Bit) ........................ 17 Clock Source Select (T0CS Bit) ................................. 17 External Clock ............................................................ 54 Interrupt ...................................................................... 53 Operation ................................................................... 53 Overflow Enable (TMR0IE Bit) ................................... 18 Overflow Flag (TMR0IF Bit) ....................................... 97 Overflow Interrupt ...................................................... 97 Prescaler .................................................................... 54 T0CKI ......................................................................... 54 Timer1 ................................................................................ 57 Associated Registers ................................................. 62 Capacitor Selection .................................................... 60 Counter Operation ..................................................... 58 Operation ................................................................... 57 Operation in Asynchronous Counter Mode .................................................... 59 Operation in Synchronized Counter Mode .................................................... 58 Operation in Timer Mode ........................................... 58 Oscillator .................................................................... 60 Oscillator Layout Considerations ............................... 60 Prescaler .................................................................... 61 Resetting Register Pair (TMR1H, TMR1L) ................. 61 Resetting Using a CCP Trigger Output ...................... 61 TMR1H ....................................................................... 59 TMR1L ....................................................................... 59 Use as a Real-Time Clock ......................................... 61 Timer2 ................................................................................ 63 Associated Registers ................................................. 64 Output ........................................................................ 63 Postscaler .................................................................. 63 Prescaler .................................................................... 63 Prescaler and Postscaler ........................................... 63 Timing Diagrams A/D Conversion ........................................................ 142 Brown-out Reset ...................................................... 133 Capture/Compare/PWM (CCP1) .............................. 135 CLKO and I/O .......................................................... 132 External Clock .......................................................... 131
V
Vdd Pin ................................................................................ 8 Vss Pin ................................................................................. 8
W
Wake-up from Sleep .....................................................89, 99 Interrupts ..............................................................93, 94 MCLR Reset .............................................................. 94 WDT Reset ................................................................ 94 Wake-up Using Interrupts .................................................. 99 Watchdog Timer (WDT) ................................................89, 98 Associated Registers ................................................. 98 Enable (WDTEN Bit) .................................................. 98 INTRC Oscillator ........................................................ 98 Postscaler. See Postscaler, WDT. Programming Considerations .................................... 98 Time-out Period ......................................................... 98 WDT Reset, Normal Operation ....................... 91, 93, 94 WDT Reset, Sleep ................................................91, 94 WDT Wake-up ........................................................... 93 WCOL ................................................................................ 73 Write Collision Detect Bit, WCOL ...................................... 73 WWW, On-Line Support ...................................................... 3
2004 Microchip Technology Inc.
DS39598E-page 169
PIC16F818/819
NOTES:
DS39598E-page 170
2004 Microchip Technology Inc.
PIC16F818/819
ON-LINE SUPPORT
Microchip provides on-line support on the Microchip World Wide Web site. The web site is used by Microchip as a means to make files and information easily available to customers. To view the site, the user must have access to the Internet and a web browser, such as Netscape(R) or Microsoft(R) Internet Explorer. Files are also available for FTP download from our FTP site.
SYSTEMS INFORMATION AND UPGRADE HOT LINE
The Systems Information and Upgrade Line provides system users a listing of the latest versions of all of Microchip's development systems software products. Plus, this line provides information on how customers can receive the most current upgrade kits. The Hot Line Numbers are: 1-800-755-2345 for U.S. and most of Canada, and 1-480-792-7302 for the rest of the world. 042003
Connecting to the Microchip Internet Web Site
The Microchip web site is available at the following URL: www.microchip.com The file transfer site is available by using an FTP service to connect to: ftp://ftp.microchip.com The web site and file transfer site provide a variety of services. Users may download files for the latest Development Tools, Data Sheets, Application Notes, User's Guides, Articles and Sample Programs. A variety of Microchip specific business information is also available, including listings of Microchip sales offices, distributors and factory representatives. Other data available for consideration is: * Latest Microchip Press Releases * Technical Support Section with Frequently Asked Questions * Design Tips * Device Errata * Job Postings * Microchip Consultant Program Member Listing * Links to other useful web sites related to Microchip Products * Conferences for products, Development Systems, technical information and more * Listing of seminars and events
2004 Microchip Technology Inc.
DS39598E-page 171
PIC16F818/819
READER RESPONSE
It is our intention to provide you with the best documentation possible to ensure successful use of your Microchip product. If you wish to provide your comments on organization, clarity, subject matter and ways in which our documentation can better serve you, please FAX your comments to the Technical Publications Manager at (480) 792-4150. Please list the following information and use this outline to provide us with your comments about this document. To: RE: Technical Publications Manager Reader Response Total Pages Sent ________
From: Name Company Address City / State / ZIP / Country Telephone: (_______) _________ - _________ Application (optional): Would you like a reply? Device: PIC16F818/819 Questions: 1. What are the best features of this document? Y N Literature Number: DS39598E FAX: (______) _________ - _________
2. How does this document meet your hardware and software development needs?
3. Do you find the organization of this document easy to follow? If not, why?
4. What additions to the document do you think would enhance the structure and subject?
5. What deletions from the document could be made without affecting the overall usefulness?
6. Is there any incorrect or misleading information (what and where)?
7. How would you improve this document?
DS39598E-page 172
2004 Microchip Technology Inc.
PIC16F818/819
PIC16F818/819 PRODUCT IDENTIFICATION SYSTEM
To order or obtain information, e.g., on pricing or delivery, refer to the factory or the listed sales office. PART NO. Device X Temperature Range /XX Package XXX Pattern Examples:
a) b) Device PIC16F818: Standard VDD range PIC16F818T: (Tape and Reel) PIC16LF818: Extended VDD range PIC16LF818-I/P = Industrial temp., PDIP package, Extended VDD limits. PIC16F818-I/SO = Industrial temp., SOIC package, normal VDD limits.
Temperature Range
-= I= E=
0C to +70C -40C to +85C (Industrial) -40C to +125C (Extended)
Package
P SO SS ML
= = = =
PDIP SOIC SSOP QFN
Note 1: 2:
Pattern
QTP, SQTP, ROM Code (factory specified) or Special Requirements. Blank for OTP and Windowed devices.
F = CMOS Flash LF = Low-Power CMOS Flash T = in tape and reel - SOIC, SSOP packages only.
2004 Microchip Technology Inc.
DS39598E-page 173
WORLDWIDE SALES AND SERVICE
AMERICAS
Corporate Office 2355 West Chandler Blvd. Chandler, AZ 85224-6199 Tel: 480-792-7200 Fax: 480-792-7277 Technical Support: http:\\support.microchip.com Web Address: www.microchip.com Atlanta Alpharetta, GA Tel: 770-640-0034 Fax: 770-640-0307 Boston Westford, MA Tel: 978-692-3848 Fax: 978-692-3821 Chicago Itasca, IL Tel: 630-285-0071 Fax: 630-285-0075 Dallas Addison, TX Tel: 972-818-7423 Fax: 972-818-2924 Detroit Farmington Hills, MI Tel: 248-538-2250 Fax: 248-538-2260 Kokomo Kokomo, IN Tel: 765-864-8360 Fax: 765-864-8387 Los Angeles Mission Viejo, CA Tel: 949-462-9523 Fax: 949-462-9608 San Jose Mountain View, CA Tel: 650-215-1444 Fax: 650-961-0286 Toronto Mississauga, Ontario, Canada Tel: 905-673-0699 Fax: 905-673-6509
ASIA/PACIFIC
Australia - Sydney Tel: 61-2-9868-6733 Fax: 61-2-9868-6755 China - Beijing Tel: 86-10-8528-2100 Fax: 86-10-8528-2104 China - Chengdu Tel: 86-28-8676-6200 Fax: 86-28-8676-6599 China - Fuzhou Tel: 86-591-750-3506 Fax: 86-591-750-3521 China - Hong Kong SAR Tel: 852-2401-1200 Fax: 852-2401-3431 China - Shanghai Tel: 86-21-5407-5533 Fax: 86-21-5407-5066 China - Shenyang Tel: 86-24-2334-2829 Fax: 86-24-2334-2393 China - Shenzhen Tel: 86-755-8203-2660 Fax: 86-755-8203-1760 China - Shunde Tel: 86-757-2839-5507 Fax: 86-757-2839-5571 China - Qingdao Tel: 86-532-502-7355 Fax: 86-532-502-7205
ASIA/PACIFIC
India - Bangalore Tel: 91-80-2229-0061 Fax: 91-80-2229-0062 India - New Delhi Tel: 91-11-5160-8632 Fax: 91-11-5160-8632 Japan - Kanagawa Tel: 81-45-471- 6166 Fax: 81-45-471-6122 Korea - Seoul Tel: 82-2-554-7200 Fax: 82-2-558-5932 or 82-2-558-5934 Singapore Tel: 65-6334-8870 Fax: 65-6334-8850 Taiwan - Kaohsiung Tel: 886-7-536-4818 Fax: 886-7-536-4803 Taiwan - Taipei Tel: 886-2-2500-6610 Fax: 886-2-2508-0102 Taiwan - Hsinchu Tel: 886-3-572-9526 Fax: 886-3-572-6459
EUROPE
Austria - Weis Tel: 43-7242-2244-399 Fax: 43-7242-2244-393 Denmark - Ballerup Tel: 45-4420-9895 Fax: 45-4420-9910 France - Massy Tel: 33-1-69-53-63-20 Fax: 33-1-69-30-90-79 Germany - Ismaning Tel: 49-89-627-144-0 Fax: 49-89-627-144-44 Italy - Milan Tel: 39-0331-742611 Fax: 39-0331-466781 Netherlands - Drunen Tel: 31-416-690399 Fax: 31-416-690340 England - Berkshire Tel: 44-118-921-5869 Fax: 44-118-921-5820
09/27/04
DS39598E-page 174
2004 Microchip Technology Inc.

▲Up To Search▲

Price & Availability of PIC16F818

	To Download PIC16F818 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .